Natural Light 21" Tubular Skylight 1 ft Light Pipe Additional Light Pipes Extra sections of light pipe can be purchased for tall attic installations. Each additional section is 12" in length. 10" model - maximum light pipe length = 18 feet 13" model - maximum light pipe length = 20 feet 18" model - maximum light pipe length = 20 feet 21" model - maximum light pipe length = 20 feet
Natural Light 10" Tubular Skylight Elbow The elbow is constructed out of the same material as our light pipe and is fully adjustable from 0 - 45 degrees. For use in steep pitch situations or applications where straight pipe runs are not possible.
OutBack Power FWPV-12 Power System PV Combiner FWPV-12 PV Combiner, space for up to 12 150VDC rated breakers (two groups of six) or 8 600VDC fuse holders (two groups of four).One negative bus, one ground bus, one combiner bus bar w/dual 210 output terminals The OutBack Power Systems FLEXware PV combiner series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV8 and FLEXware PV12 accommodates the overcurrent protection requirements of your
302004C SolarMount End Mounting Clamp - Size D with Hardware - 20 Pack Unirac 302004C SolarMount End Mounting Clamp - Size D with Hardware Mid clamp material: One of the following extruded aluminum alloys: 6005-T5, 6105-T5, 6061-T6 Ultimate tensile : 38ksi, Yield: 35 ksi Finish: Clear Anodized Package Quantity: 20 Pack Mid clamp weight: 0.050 lbs (23g) Allowable and design loads are valid when components are • assembled according to authorized UNIRAC documents Values represent the allowable and design
004702G STANDOFF 7" RAISED FLANGE STEEL UniRac 004702G 7" Raised Flange Standoff Replaces the Unirac 310054 Shaft outside diameter = 1 5/8 inches Size: 7" Zinc plated steel finish Includes s/s hardware, EXCEPT roof mounting lag bolts. Qty: 1 Use with: SolarMount SolarMount Heavy Duty SunFrame
403303C ULA BRACE, 3" @ 14 FT, AL UniRac 403303C U-LA 14' Brace for 3" Pipe - Aluminum Replaces the Unirac 330107 Provides north-south and east-west diagonal bracing. Extrusion size matches other 2- or 3-inch components. Be prepared to cut and drill braces on the jobsite. Hole location is 1” from the end of brace along the center line. Mill-Finish Aluminum NOTE: Pipe is installer provided.
303003C SM SPLICE PLATE CLR UniRac 303003C SolarMount Splice Plate with Hardware Splice for SolarMount Standard and Heavy Duty Rail Replaces the Unirac 310214 Order one splice wherever two segments are to be joined into a single rail. Qty: 1
QMF™ B Specialty Flat Tile Mount with Flashings - Bronze Anodized Quick Mount PV QMFTM B Specialty Flat Tile Mount with Flashings - Bronze Anodized The aluminum sub-flashing is sized for easy code compliance, and molded to fit snugly over the mounting plate and removable standoff. Use standard roofing methods at the deck – bibbing or 3-coursing, for instance – to seal off rain from the penetrations and fasteners. All exposed components are aluminum, stainless steel or EPDM rubber to help
QMHS-12 12" Hangar Bolt Hardware Set Quick Mount PV QMHS-12 12" Hangar Bolt Hardware Set Some jobs call for a longer hanger bolt to span gaps where insulation has been installed over the roof structure Only the shank of the hanger bolt is lengthened to maintain pull out and shear strength. 12" stainless steel hang Hanger bolts with nuts and washers Qty: 1 Custom lengths are available upon request. Also Known As: QMHS.12 QMHS 12 QMHS_12 QMHS12