2 GPH Fogger mister on barbed elbow. May use with 1/2" poly tube or 1/4" micro tube. Produces fine mist for ferns or other mist loving plants. This is the same mister as item number 1114 just minus the stake .FeaturesIncorporate a vortex design, swirls water droplets into a fine mistModular, lightweight and easy to maintain, configure and installDesigned without a bridge to prevent drippingThree part construction with O-ring for a tight seal
This filter has a large 1" Screen filter made of 155 mesh and the ability to be connected directly to a hose bib.The 155 mesh screen prevents dirt from entering and clogging the drip line. Can also be used to apply any water soluble fertilizer by placing within the screen.Use with hose thread fittings. Remove and clean periodically.
Please note that this is not designed to be under constant pressure.3/4" FHT x 3/4" MHT - backflow preventer prevents dirt or fertilizer from re-entering the water supply. Install after the faucet or timer. Special Note: During normal operation the backflow preventer will appear to "leak" after the system or timer is turned off. This is normal as the backflow preventer is allowing water to drain from the system without entering the water supply. The amount of water drained will be equal to the water
This filter has a large 1" Screen filter made of 155 mesh.The 155 mesh screen prevents dirt from entering and clogging the drip system. Can also be used to apply any water soluble fertilizer by placing within the screen.Remove and clean periodically.
This filter has a large 1" screen filter made of 155 mesh.The 155 mesh screen prevents dirt from entering and clogging the drip line. It can also be used to apply any water-soluble fertilizer by placing it within the screen.Use with pipe thread fittings. Remove and clean periodically.
You can use this tool to help ease the insertion of flag drippers. Simply hold the punch in your hand, insert a flag dripper into the punch end and then press the flag dripper into the tubing. Easy! This tool is not required, but it can make things easier if you are using a lot of flag drippers.
This product comes in 180 degree 360 degree spray patternsThis high quality adjustable dripper has a barb inlet mounted on a spike (5 inches from tip to top) that allows for the insertion of 1/4" micro tubing to the spike. The riser allows you to mount the adjustable dripper a few inches above ground.Adjustable drippers allow the option of changing the flow rate of water to each individual plant. It is as simple as twisting the dial on the dripper toward the "+" or the "-" signs to decrease or increase flow
This fitting is used to convert polyethylene tubing to female hose threads (FHT). Common use is to connect poly tubing to garden hose or faucet. The female threads on this fitting are standard garden hose threads. They will attach to common garden hoses and house faucets. They are not compatible with PVC threads.About Drip Depot Perma-Loc Drip Irrigation Fittings:Perma-Loc fittings are heavy duty reusable connectors, adapters and fittings for all your connection needs. They are very easy to use and require
This fitting is used to connect two pieces of polyethylene tubing to achieve a 90 degree turn.About Drip Depot Perma-Loc Drip Irrigation Fittings:Perma-Loc fittings are heavy duty reusable connectors, adapters and fittings for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line. To use: Simply push tubing or tape over barbed end, then hand-tighten