• Refine by >
      • 49 products from 19 stores for

        plywood canoe building

        Ads
  • departments

  • Show Only

  • prices

  • Colors

    Filter by color:
    Adjust your color:
  • stores

    • More ...
  • marketplaces

  • brands

    • More ...
  • payment types

  • certifications

  • BOOK BUILDING THE SIX HOUR CANOE 134897

    BOOK BUILDING THE SIX HOUR CANOE 134897 TP -9610396 -7 -1 $15 .00 / Each $13.50 / Each Inexpensive to build, using common tools and materials, it can give almost anybody access to boat building and to a boat. The Six-Hour Canoe is constructed from a single 4' x 16' sheet of marine plywood and a few pieces of dimensional lumber. When constructed with epoxy glued seams, it remains leak free from the moment it is put in the water. - The Six-Hour Canoe was the brainchild of Mike O'Brien. Originally designed

    Highlights:

    Marine, Designer, Light, Carrying, Water, Single, Vehicle, Personal
  • Louisana Plywood Boat Plans (pirouge ,canoe .fishing ,skiff ,jonboat ,bass Fishing)

    Complete set of plans to build your own pirogue. A pirouge is a traditional cajun boat built of plywood. These boats have a very shallow draft and can be taken into the shallowest of waters. Light enough to strap to the top of your car or put in the back of your pickup truck, this is a must have for anyone who wants to fish anywhere and everywhere, and you can build this built in a weekend.The tools required are a hand saw or jig saw, block plane, claw hammer, some C clamps, measuring tape,a su

    Highlights:

  • Building a Sassafras 14 ft. stitched lapstrake canoe

    July 18, 2007 Committing to a design I have been borrowing my neighbor's 17ft plastic "battleship" canoe occasionally over the last few years. It weighs a ton and is an big deal to take down to the lake, requiring 2 people to lift it. The boat launching ramp for Nequasset Lake and river is just 1/2 mile from here and I decided that I would get out on the water and explore the Maine coastal waters more often if I had a smaller, lighter boat that I could throw on the roof rack by myself on a whim. When I was

    Highlights:

  • Building the Six-Hour Canoe

    Building the Six-Hour Canoe Complete step-by-step instructions and plans for building this clever and capable design built from one sheet of 4 x 16 ft. plywood, some dimensioned lumber and common tools . BBDTIL008 Shopping cart by

    Highlights:

  • Building a Sassafras 14 ft. stitched lapstrake canoe

    July 18, 2007 Laying out the planks -- 1:20 hours Yesterday I drove down to Portland, Maine to buy all the materials as specified in the book. I spend about $650.00 and I came back with almost everything. At I bought 4 sheets of 4mm Okume marine plywood, and 2 sheets of 1/2" MDF to use as a support while working on the project. At I bought fiberglass and epoxy, and all the mixing and application tools, and also the canoe seats. Click on the tool bar above (bottom right corner) to see the complete bill of

    Highlights:

  • The Canoe Shop: Three Elegant Wooden Canoes Anyone Can Build By Chris Kulczy

    International Marine published Chris Kulczycki's Kayak Shop in 1993. The book includes complete plans and building instructions for three wooden sea kayaks for the home builder. The boats are beautiful and seaworthy craft built from marine plywood and epoxy using the "stitch and glue" method. Last year we undertook a new edition of that book due to its continued success and the evolution of the author's kayak designs. The New Kayak Shop will be published in September. Now Kulczycki offers The Canoe Shop:

    $19.50
    • Free shipping

    Highlights:

    Marine, Designer, Home, Elegant, Rugged
  • Osborn Model Kits N Scale 3006 16 Foot Canoe Set Of Two Kit

    Osborn Model Kits N Scale ~16 Foot Canoe Laser Kit ~Set of Two ~#3006 Unfinished Laser Cut Wood Kit ~Assembly Painting Required In Stock, Brand New with Manufactures Warranty. Kit contains two canoes. A great addition to a pond or river. Approximate Actual Size when built: 1 1/4" Long X 5/16" Wide.Osborn Model Kits manufactures an extensive line of N scale scenic detail parts. The kind of things that modelers tend to miss when building there layout. All kits are laser cut and plywood is used wh

    $8.95
    • Free shipping

    Highlights:

    Long, Wide, Assembled, Extensive Line, Laser Cut
  • Building the Sweet Dream: An Ultralight Solo Canoe

    Building the Sweet Dream: An Ultralight Solo Canoe Complete-and we mean complete-plans and illustrated building instructions for this lightweight, simply-constructed and very handsome solo canoe. Constructed of plywood and intended for either single or double paddle, it is an ideal first boatbuilding project . BBDTIL013 Shopping cart by

    Highlights:

  • Peace Canoe

    » Peace Canoe Boat Plans » Stitch & Glue Designs Peace Canoe Peace Canoe 18' 0" 100 lbs. 44 in. 600 lbs. Open Peace Canoe Configurations : Plywood Parts Kit Glue Kit Hardware Kit A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials. The Peace Canoe is an interesting new addition to the Chesapeake Light Craft fleet. Call it a canoe, a pirogue, a bateau, or whatever you like---the Peace Canoe is good basic transportation that you can build in a

    Highlights:

  • Boat Building Plans

    Boat Building Plans Boat Building Plans a dedicated kayaker, canoeist and small boat user. Small Boat Building Plans . Full size boat building plans for do it yourself boat builders. No lofting required. These are all original designs by All the designs are listed below, or you can narrow down your selection by clicking on one of the links above. You may also Full sized canoe plans to build your own strip-built tandem Canoe. These full size plans include patterns for all the forms needed to build a cedar

    Highlights:

    Paper, Narrow, Designer, Dedicated, Fullsize, Manual, Racing, Original, Small Boats, Custom, Long Distances
  • Peace Canoe

    » Peace Canoe Canoe Kits Peace Canoe Peace Canoe 18' 0" 100 lbs. 44 in. 600 lbs. Open Peace Canoe Configurations : Plywood Parts Kit Glue Kit Hardware Kit A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials. The Peace Canoe is an interesting new addition to the Chesapeake Light Craft fleet. Call it a canoe, a pirogue, a bateau, or whatever you like---the Peace Canoe is good basic transportation that you can build in a weekend. With its

    Highlights:

  • Wabanaki 15-36 Canoe

    Weight of hull: Hull weight will depend on skill of the builder and chosen build materials. Achieving the lowest overall weight will require the best materials and a highly skilled builder. The Wabanaki Confederacy was a coalition of five American Indian tribes on the eastern seaboard of the United States, mostly in Maine. The Abenaki, the Penobscot, the Maliseet, the Passamaquoddy, and the Mi'kmaq collaborated on issues such as diplomacy, war, and trade. The Wabanaki 15-36 is a larger, tandem (2 paddler)

    Highlights:

    Designer, Round, Cover, Performance, Water
  • Precut Plywood Kit

    Sasquatch 18-5 We've revised the original Sasquatch canoe building plans to make the hull lighter and easier to build while still maintaining its gear hauling abilities. The Sasquatch Wilderness Tripping Canoe is designed with long-term camping in mind. Its large hull will easily haul all your camping gear with a maximum payload of 800 pounds (363 k) while still maintaining a reasonable amount of maneuverability through rough waters and long journeys. If you find yourself on a trip needing to take more than

    Highlights:

  • Free 2 Day Shipping: The Canoe Shop: Three Elegant Wooden Canoes Anyone Can

    International Marine published Chris Kulczycki's Kayak Shop in 1993. The book includes complete plans and building instructions for three wooden sea kayaks for the home builder. The boats are beautiful and seaworthy craft built from marine plywood and epoxy using the "stitch and glue" method. Last year we undertook a new edition of that book due to its continued success and the evolution of the author's kayak designs. The New Kayak Shop will be published in September. Now Kulczycki offers The Canoe Shop:

    $18.01
    • Free shipping

    Highlights:

    Marine, Designer, Home, Elegant, Rugged
  • 1997/10 Canoe & Kayak - Chesapeake 17

    1997/10 Canoe & Kayak - Chesapeake 17 Magazine Appearances CANOE & KAYAK - OCTOBER 1997 5 KIT BOATS: WE TAKE 'EM FOR A SPIN by Beth Geiger [Reviewed: Monfort Associates, Chesapeake Light Craft, Betsie Bay Kayak, Flounder Bay Boat Lumber, Pygmy.] Building your own boat is as much about the process as it is about the result. CHESAPEAKE 17™ REVIEW The Chesapeake 17™ is a recent (Spring 1997) addition to Chesapeake Light Craft's kit-kayak selection. In addition to the 17-foot kayak I tested, the model comes in

    Highlights:

    Designer, Fiberglass, Stable, Hard, Round, Retaining, Water, Comfort
  • Precut Plywood Kit

    Mini Skiff The Mini Skiff was a custom design request for a hull larger than a canoe but not as large as a full skiff. The intent was a car-toppable boat that was stable, had large capacity, easy to build and easy to customize. The Mini Skiff is not meant for open waters as it only has the same hull depth as typical store-bought canoes. But it will do great on calm waters while hauling 2 adults and a cooler for fishing or recreational boating. Permanent seats are not required due to the 2 frame sets that

    Highlights:

  • Ultralight Boatbuilding

    >> Ultralight Boatbuilding Ultralight Boatbuilding In stock $19 .95 Catalog # 0071567038 Ultralight canoes and small boats are things of beauty, their apparent delicacy concealing great strength. They are lapstrake -constructed from marine plywood planks, each plank overlapping the one below it in a gracefully curved hull. Epoxy glue along the laps gives the hull structural reinforcement, minimizing the need for framing and permitting an amazingly light structure. Round-bilged and elegant, they are

    Highlights:

    Marine, Elegant, Round, Small Boats, Light, Custom, Ultralight, Canoes
  • Wooden Kayak, Canoe & Row Boat Kits

    Rowing Skiff: Row Boat Kit 14 ' 48 " 16 " 90lbs $1599 NA Wooden Canoe Kit 17 ' 35 " 13 " 60lbs $1439 NA Boat Kit Contents: KAYAK KITS , a , or (customer chooses). Our page describes these items, plus other optional gear. bulkheads and hatches sea sock flotation bags Accessories WINEGLASS WHERRY ROW BOAT KIT: Precision pre-cut BS-1088 Okoume plywood panels (4mm), 3 gallons System Three epoxy, dispensing pumps, 70 feet of 6 oz. 38" wide fiberglass cloth, 10 yards of 1.5" fiberglass tape,

    Highlights:

    Wide, Pump, Transom, Manual, Plastic, Accessory, Functional, Custom, Water, Sea, Fiberglass, Frame, Starting, System, Small
  • Wabanaki 15-36 Canoe

    Weight of hull: Hull weight will depend on skill of the builder and chosen build materials. Achieving the lowest overall weight will require the best materials and a highly skilled builder. The Wabanaki Confederacy was a coalition of five American Indian tribes on the eastern seaboard of the United States, mostly in Maine. The Abenaki, the Penobscot, the Maliseet, the Passamaquoddy, and the Mi'kmaq collaborated on issues such as diplomacy, war, and trade. The Wabanaki 15-36 is a larger, tandem (2 paddler)

    Highlights:

  • 10 Wooden Boats You Can Build

    :: 10 Wooden Boats You Can Build 10 Wooden Boats You Can Build 10 Wooden Boats You Can Build Price: $24.95 Author: series editor Peter H. Spectre Publication Date: 1995 Cover: Paperback Pages: 210 Size: 8 1/2 x 11 Examines a variety of designs and construction techniques. Included are a Herreshoff daysailer, stitch & glue kayak, Norwegian pram, strip-built, double paddle canoe, lapstrake, plywood runabout, more . Details WBP021

    Highlights:

    Designer, Cover
  • McInnis Bateau

    McInnis Bateau Plans - $55 In the 1940s and 1950s, Walter McInnis was known as one of United States' leading designers of large power craft. Also an avid fly fisherman, McInnis desired a small row boat to explore streams and other shallows that power boats could not get to. He designed the "voyageur's bateau" as a hunting and fishing row boat as a replacement to the standard canvas canoe. The hull was to be light enough to cartop by still large enough to be stable for fly fishing and provide the capacity to

    Highlights:

  • BHC

    BHC BHC BHC The design was a custom request from a grandfather that wanted a large boat he could take his grandchildren out for a comfortable day of rowing. After the design was finalized, he proclaimed "That looks like one B ig H onkin ' C anoe ! " . The program for this boat is efficient rowing with plenty of room for passengers. But it was to be very sea worth for when the rower ventured out into choppy water. The hull is symmetrical allowing for easy drawing and cutting of panels for assembly.

    Highlights:

  • Stitch n Glue Kits

    Navigator & Explorer Designs by Hans Friedel The following descriptions will help you to understand how we can provide kits or materials for canoes, kayaks, or rowing boats. If you have questions please call or ; we have assisted in many boatbuilding projects and can help you make intelligent choices in designs and materials. You do not have to purchase a complete kit: You can purchase any individual materials you need to assist in your boatbuilding project. The Stitch n Glue Kayak Kit Includes: Plan

    Highlights:

  • RACING 14.5 - MOLDED VENEER # BK 59 (PBK 59)

    RACING 14.5 - MOLDED VENEER # BK 59 (PBK 59) The Racing Kayak is a cold molded single seat touring kayak suitable for racing. It is built of three layers of thin veneer (3/32" or 1.5 mm) glued together over a mold. The mold maybe used for making several canoes, making this a great choice for groups. The finished hull has no internal structure. The load capacity of this model is 350 lbs. Plans with full size patterns. KAYAK RACING 14 DATA LENGTH 14 '6 " BEAM 23 1 /2 " COCKPIT 45 " WEIGHT 32 LBS.

    Highlights:

  • Stitch & Tape Boat Construction

    Stitch & Tape Boat Construction This new manual incorporates our old "Manual of Modern Small Plywood Boat Construction Techniques" but now also includes several new sections. These include new chapters on fitting buoyancy (flotation), shaping and constructing masts and spars and an extensive chapter on fitting out the hull with decks, centreboards, seating etc. Many new photographs and illustrations have been added along with up to date details and description of the modern stitch and tape process. This

    Highlights:

    Long, Cutting, Deck, Fitting, Transom, Manual, Soft, Small
  • BHC

    BHC The design was a custom request from a grandfather that wanted a large boat he could take his grandchildren out for a comfortable day of rowing. After the design was finalized, he proclaimed "That looks like one B ig H onkin ' C anoe ! " . The program for this boat is efficient rowing with plenty of room for passengers. But it was to be very sea worth for when the rower ventured out into choppy water. The hull is symmetrical allowing for easy drawing and cutting of panels for assembly. The

    Highlights:

  • Hybrid Kits

    write up for a customer's viewpoint of the Hybrid Construction process. The Hybrid Kayak Kit: Bob Larkin's Plan Sheets, Fiberglassing DVD, Hybrid Construction Notes by Michael Vermouth, CNC cut 4 mm Okoume plywood hull panels with pre-drilled wire holes, beveled plywood panels, and locking butt joints, pre-cut plywood bulkheads, cove and bead cedar strips for the deck (50% red cedar, 50% white cedar), Deck forms with exclusive Ladder LOC (TM) Strongback, 1-1/2 gal Epoxy, rolled Fiberglass, epoxy application

    Highlights:

  • The practical and performance advantages of the balance lug rig

    Goat Island Skiff 15' 6" Boat Plans designed by Michael Storer Simple to Build Modern Performance - Sails rings around most "character boats" Light enough to handle on land by yourself Easy to follow plans - step by step instructions. The Goat Island Skiff is my most popular plan, the reason ... it is really pretty. So catches peoples attention. Once it has caught their attention they start to see other advantages. It is really light - which means that it is easy to move around on shore and is one of the

    Highlights:

    Versatile, Designer, Stepping, Laser, High Efficiency, Racing, Light, Starting, Performance, Island, Small
  • 10 Wooden Boats You Can Build

    10 Wooden Boats You Can Build / 10 Wooden Boats You Can Build 10 Wooden Boats You Can Build SKU: WBP021. Product Description Ten articles from past issues of WoodenBoat Magazine examining a variety of designs and construction techniques. Included are a Herreshoff daysailer, stitch & glue kayak, Norwegian pram, strip-built, double paddle canoe, lapstrake, plywood runabout, more.

    Highlights:

    Designer
  • SPRAY 13.5 - CANVAS COVERED #BK 62 (PBK 62)

    SPRAY 13.5 - CANVAS COVERED #BK 62 (PBK 62) A fabric covered white water single seat canoe, with an oval cockpit and plywood side decks, no outside wood parts and fabric sides to the seat; making it suitable for advanced strokes, shooting rapids, slalom and surfing. It has ample stability for a beginner and is no more difficult to build than other fabric covered canoes. Plans include cockpit cover. Plans with full size patterns. KAYAK CANVAS - RACING 14 DATA 13' 6" 80" 3" # BK 62

    Highlights:

    Fullsize, Racing, Cover, Single
  • Share:
  • About these links Ads