-
03-04 Nissan 350Z Lowering Springs
These progressive rate springs are made of high grade, chrome silicone wire, CNC cold wound, heat treated, shot-peened for stress relief and pre-set to ensure maximum performance. They are powder-coated in deep racing purple, and sold in sets of four (two front/two rear). Lowering capabilities of 2" to 2.5." Lowering Springs Note the following compatibility exceptions:This product does not work with Chevrolet Camaro Convertibles, For Escort Wagons or Toyota Camry Wagons
Find more:
-
Brian Crower Single Valve Springs Toyota Toyota Lexus 2JZGTE 2JZGE
"Brian Crower Single Valve Springs Toyota Lexus 2JZGTE 2JZGEThe engine of choice for the fastest of the Sport Compact drag cars due to the tremendous power potential of Toyota's 2JZ-GTE, factory twin turbo engine. It is also used in Drifting with it's rear wheel drive setup. The 3.0-liter, inline six cylinder has proven itself to not only be capable of tremendous power output, but to also be extremely reliable. Made from 1994-1998, the 2JZGTE was employed in the Supra Mk IV chassis. The name is a
Find more:
-
00-04 Ford Focus 4Dr Lowering Springs
These progressive rate springs are made of high grade, chrome silicone wire, CNC cold wound, heat treated, shot-peened for stress relief and pre-set to ensure maximum performance. They are powder-coated in deep racing purple, and sold in sets of four (two front/two rear). Lowering capabilities of 2" Lowering Springs Note Special Circumstances of compatibility. If you have a 98-01 Honda Accord, this product only fits the 4 cylinder version. If you have a 02-04 Mitsubishi Lancer, this product does not fit the
Find more:
-
H Tech Lowering Spring Set VW Jetta IV 1999-2005
Tein is a well-known name when it comes to spring and coilover damper kit. Tein products are made in Japan with high-grade material for performance and quality. Tein H Tech lowering spring provides approximately between 1.0 to 1.9 inch drop to achieve a balance between aggressive styling and comfortable ride experience. Check the detail specifications of each Tein H Tech spring set for your car for the exact height drop measurement. Most Tein H Tech spring sets feature rubber spring protector tube to dampen
$296.00Find more:
-
Honda Accord 2.2L SOHC 16V (F22B2-F22B6) 94-95 High Pressure Dual Spring Kit
:: Honda Accord 2.2L SOHC 16V (F22B2-F22B6) 94-95 High Pressure Dual Spring Kit Honda Accord 2.2L SOHC 16V (F22B2-F22B6) 94-95 High Pressure Dual Spring Kit Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Our springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to
$709.99Slowboy RacingFind more:
-
Honda S2000 Valve Springs
Brian Crower Valve Springs for the S2000 Designed for high rpm, BC valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm useage. Quality valve springs are critical in the prevention of premature valve float. Honda S2000 F20C, F22C - Dual Valve Springs (16) $209.63 BC1040 Eibach Valve Springs for the S2000 High Performance Valve Springs For Race Engines by
-
2408C - Hotchkis Leaf Spring Kits
2408C - Hotchkis Leaf Spring Kits Dramatically improve your classic muscle car's cornering performance, traction, and overall fun factor with Hotchkis Sport Suspension's Geometry Correcting Sport Leaf Springs. Lightweight leaf springs are designed to improve handling performance and balance. The lowered design reduces the vehicle's center of gravity and improves overall appearance. These systems include Grade-8 Hardware, Bushings and a pair of track-tested leaf springs. Bolt a set on today and feel the
$8.99Jeg's High Performance -
Approx. 1-1/2"-2" Add-A-Leaf Rear Spring Kit for Suzuki Samari
Deaver Spring Part Number: DEAH37 Product Name: Approx. 1-1/2"-2" Add-A-Leaf Rear Spring Kit for Suzuki Samari List Price: $34.44 Our Price: $28.99 You Save: $5.45 Deaver Spring produces a line of Suzuki Samurai springs exclusively for Rocky Road Out-fitters. Deaver has a reputation for their quality and excellence in the industry. They are also the spring of choice for off-road racers, or for high dollar rigs with custom built springs. Rocky Road brings you the ultimate quality and performance of
$28.99Off-Road WarehouseFind more:
-
Crower SRT-4 Springs & Retainer Set
Crower SRT-4 Springs & Retainer Set Crower SRT-4 Springs & Retainer Set #5552 BC-0160 $324.94 2.4L engine in Dodge SRT-4. These are premium valve springs, wound from only the finest super clean, chrome silicone wire and featuring superior processing procedures that include unparalleled chamfer and debur. BC valve springs are dyno tested and will not loose pressure over extended periods of high rpm use. BC titanium retainers are CNC machined from only the highest grade, 6AL4V titanium round bar to exacting
$249.95TurboWholesale.com -
Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1990-1993
→ Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1990-1993 Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1990-1993 SKU:TEN-SKA16-AUB00 (1145) MSRP:$320.00 Price: $224.00 Customer Rating: Product Notes: 4cyl 4dr/2dr APPLICATION: Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1990-1993 Tein is a well-known name when it comes to spring and coilover damper kit. Tein products are made in Japan with high-grade material for performance
$224.00Race InspiredFind more:
-
Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1998-2002
Honda Suspension Honda Accord Suspension Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1998-2002 Tein S Tech Lowering Spring Set Honda Accord 4-Cyl Coupe / Sedan 2Dr-4Dr 1998-2002 Tein is a well-known name when it comes to spring and coilover damper kit. Tein products are made in Japan with high-grade material for performance and quality. Tein S Tech lowering spring provides approximately between 1.3 to 2.5 inch drop for a more aggressive appearance. Check the detail
$260.00ngkitsFind more:
-
TEIN S.Tech Springs 240sx 89-98:
/ TEIN S.Tech Springs 240sx 89-98: TEIN S.Tech Springs 240sx 89-98: 240sx '89-'94 1.5-inch Drop Front And 1.2-inch Drop Rear 240sx '95-'98 1.3-inch Drop Front And 0.9-inch Drop Rear Dress-Up Master S.Tech Coil Springs The S.Tech spring is an excellent step towards suspension tuning. They offer a more aggressive drop for a sportier appearance. Comes with 1-year warranty, the spring length is guarantted not to sag more than 5mm an dto be clear of any manufacture defects. Rubber Spring Protector Prevents Noise
$209.00Intense Motorsports -
4" Lift, 1998 - March/99, F250/F350 4WD V10/Diesel Leaf Spring Straight Axle
1998-3/99 F-250/F-350 Superduty 4WD V10 / Diesel Pro Comp is globally recognized as one of the leaders in off-road technology. Since 1992 we’ve been manufacturing high quality, durable products for on and off road racers and enthusiasts. Pro Comp has created value for its customers by improving product performance and integrating new technologies. Our commitment to maintaining the utmost in quality and durability is what drives us and continues to be our mission statement. From concept to reality the
$46.954 Wheel online.com -
Ferrea "Endurance" Dual Spring Kit: Subaru STi EJ25
Ferrea "Endurance" Dual Spring Kit: Subaru STi EJ25 Ferrea Ferrea "Endurance" Dual Spring Kit: Subaru STi EJ25 #20238 Harmonics or high frequency fatigue is present in all racing engines and will usually destroy the valvetrain if not controlled. Properly designed valve springs will control the dominant harmonics, provide the needed stability, and reduce valvetrain component wear. Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are
$799.20extreme PSIFind more:
-
GC - E30, Front Camber / Caster Plates (for OEM, Sport, Race Springs)
GC - E30, Front Camber / Caster Plates (for OEM, Sport, Race Springs) This GC Camber/Caster plate is for use with full size OEM/ Sport/ Race springs (Not coilovers). This lets you run your favorite springs and have adjustable front suspension alignment without switching to full coilovers. If you are running in NASA Spec E30 class, match these with H&R race springs to comply with your class rules. "9.3.8.1. Any adjustable or fixed camber or camber/caster plate is allowed, unless specified in these
$299.95One Stop BMW Race ShopFind more:
-
Tein S.Tech Lowering Springs for 90-93 ACURA Integra
This auction is for a set of 100% GENUINE and BRAND NEW Tein S.Tech Lowering Springs! Brand New, Un-Opened and in Original Packaging!! TEIN S-TECH Springs are an excellent way to lower your ride height for a more aggressive appearance and stiffen up your suspension for improved handling. They come with a 1 year limited warranty and the spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. * One year limited warranty * * High-grade material adapted to improve
$140.39High Performance OutletFind more:
-
Hellwig LP-35 Helper Spring Kit #9645
Hellwig LP-35 Helper Spring Kit #9645 Hellwig LP-35 Helper Spring Kit #9645 Description Reviews The Hellwig Extreme Duty LP-35 Four Leaf Helper Springs are designed for heavy load management and towing control. With its fourth leaf, it offers more carrying capacity than the LP-25 Helper Spring. Application of the LP-35 Kit is recommended for 3/4 ton and 1 ton trucks, vans, motorhomes, and commercial vehicles. Provides Maximum Additional Leaf Spring Support! Fully Adjustable! High Grade Spring Steel Insures
$424.68neverenuf -
Rear leaf spring cup bolt mounting set
>> Rear leaf spring cup bolt mounting set Outer Mirrors and Brackets Rear leaf spring cup bolt mounting set /images /01260099 .JPG Camaro Leaf Spring Front Eye Bushing Mounting Hardware, 1967-1969, Large high grade course thread bolt, and nut, black oxide to keep rust away, come as a pair
$14.95Steve's Camaro Parts -
Tein STECH Spring
Tein STECH Spring Tein STECH Spring is an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. Key Features: - One year limited warranty. - High-grade material adapted to improve guaranteed satisfaction. - Rubber spring protector sheet to prevent noise (most applications). Description TENSKA34-AUB00 01-03 Acura
$280.00Nippon Power -
SRT4 2003 + DOHC 16 Valve (A853) Dual Spring Kit (HIGH PRESSURE)
:: SRT4 2003 + DOHC 16 Valve (A853) Dual Spring Kit (HIGH PRESSURE) SRT4 2003 + DOHC 16 Valve (A853) Dual Spring Kit (HIGH PRESSURE) Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Our springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve
$699.00Slowboy RacingFind more:
sponsored links
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
