Contains enough 3M™ Scotchlite™ tape to meet NHTSA requirements for marking trailer perimeter at side and rear. Excellent visibility, even at a 45° angle. Use on trailers up to 57 feet. Adhesive backing for easy application. U.S.A. Tape Type: Reflective, Color: Red/White, Adhesive Backing: Yes, Dimensions: L (ft.) x W (in.): (1) 75 x 2, (4) 1 x 2 Kit contains 2in. x 75ft. roll of tape in an alternating block pattern of red and white, four 2in. x 12in. corner strips, squeegee and instructions
Federal regulations require semi-trailers exceeding 10,000 lbs. GVWR to have alternating red and white DOT-C2 approved 2-in wide conspicuity tape applied along at least 50% of their lengths (can be segmented) and entirely across their back ends DOT-C2 certified conspicuity tape Reflective tape gives high visibility for enhanced night visibility. Exceeds NHTSA standards for Professional Trucking. Originally developed for professional use, it is ideal for many home and vehicle uses. Place it on anything you
CONSPICUITY REFLECTIVE TAPE Conspicuity Reflective Tape - RedWhite Place tape on trailers, construction vehicles and dock lifting trucks to prevent accidents and improve safety. Polyester based film with high tack pressure-sensitive adhesive backing. Meets DOT C-2 grade standard. 7.00 L. 2.00 W. 7.00 H.
ISC REF-DOT Reflexite Retroreflective Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. This tape is an economical and effective alternative to the 10-year products when retrofitting older equipment. The tape comes with an aggressive pressure-sensitive adhesive backing that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated
ISC REF-DOT Reflexite Retroreflective Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. This tape is an economical and effective alternative to the 10-year products when retrofitting older equipment. The tape comes with an aggressive pressure-sensitive adhesive backing that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated
ISC REF-DOT Reflexite Retroreflective Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. This tape is an economical and effective alternative to the 10-year products when retrofitting older equipment. The tape comes with an aggressive pressure-sensitive adhesive backing that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated
DOT reflective tape provides an incredible 1,200-candlepower brightness, 47,000 micro-prisms per square inch are 3 times more efficient than others, Unlike other tapes, it reflects from many angles..not just straight on, Meets NHTSA Regulations 49 CFR...
ISC REF-DOT Reflexite Retroreflective Conspicuity Tape is a DOT-compliant prismatic conspicuity tape with 5-year durability used for commercial truck and trailer marking. This tape is an economical and effective alternative to the 10-year products when retrofitting older equipment. The tape comes with an aggressive pressure-sensitive adhesive backing that is designed for application to bare and painted metals, fiberglass, structural composite materials and more. It resists edge lift due to repeated
>> DOT Conspicuity Reflective Tape 1 x 150 Roll DOT Conspicuity Reflective Tape 1 x 150 Roll 1" x 150' roll of 5-7 year rated DOT conspicuity tape available in the popular 7 inch white by 11 inch red pattern, 6" white by 6" red pattern or solid white. Exceeds ASTM 4956 Type 5 requirements. Easy to apply. Simply peel the backing off and apply to a clean surface. $89.99 As stated above we carry this in the 7/11 pattern, the 6/6 pattern and in solid white rolls. Click on the picture below to see the difference
>> DOT Conspicuity Reflective Tape 2 x 150 Roll DOT Conspicuity Reflective Tape 2 x 150 Roll 2" x 150' roll of 5-7 year rated DOT conspicuity tape available in the popular 7 inch white by 11 inch red pattern, a 6" red by 6" white pattern or in solid white. We also carry the 7/11 and white rolls with the "diamond plate pattern". Exceeds ASTM 4956 Type 5 requirements. Easy to apply. Simply peel the backing off and apply to a clean surface. Note - The 7/11 standard roll is also available in Kiss Cut rolls.
>> DOT Conspicuity Reflective Tape 2 x 30 Roll DOT Conspicuity Reflective Tape 2 x 30 Roll 2" x 30' roll of 5-7 year rated DOT conspicuity tape available in the popular 7 inch white by 11 inch red pattern, in a 6" red by 6" white pattern or in solid white. Exceeds ASTM 4956 Type 5 requirements. Easy to apply. Simply peel the backing off and apply to a clean surface. Very bright tape. $49.99 per roll. As stated above we carry this in the 7/11 pattern, the 6/6 pattern and in solid white rolls. All are DOT
>> DOT Conspicuity Reflective Tape 1 x 30 Roll DOT Conspicuity Reflective Tape 1 x 30 Roll 1" x 30' roll of 5-7 year rated DOT conspicuity tape available in the popular 7 inch white by 11 inch red pattern, a 6" red by 6" white pattern or in solid white. Easy to apply. Simply peel the backing off and apply to a clean surface. Very bright tape. Exceeds ASTM 4956 Type 5 requirements. $39.99 per roll. As stated above we carry this in the 7/11 pattern, the 6/6 pattern and in solid white rolls. All are DOT
For use on tractor trailers, flat beds, tankers, etc.; Red & white striped (11" red, 7" white); Meets all federal and state specifications; 2" x 50 yd. roll; Reflectorization Requirements: ASTM D4956-93B Type V.; NHTSA Conspicuity regulation: LS300 C-FP92, Eff. 12/1/93
ACR Self-Adhesive Reflective Res-Q Tape ACR Self-Adhesive Reflective Res-Q Tape Item Number: 70113 Thousands of highly-efficient microprisms reflect light back at source aiding both day and night rescue Applies to virtually any surface except wood Complies with SOLAS 74/83; USCG 164.018/4/0 approved; DOT-C2 Application: Ideal for life jackets, rafts, survival suits, canoe/kayak paddleblades, backpacks, work vests, bicycles Size: 4.0 x 4.0 in (10.0 x 10.0 cm) Weight: 1 oz (28 g).
Self-Adhesive Retro-Reflective Tape - 10% Off Red Tag Sale! Price shown reflects 10% discount. RMK-1Self-adhesive Retro-reflective TapeThousands of highly-efficient micro prisms reflect light back at source aiding both day and night rescue Applies to virtually any surface except wood USCG-approved immersion suits require 31 square inches (two 4 x 4 in patches) on both front and back sides Complies with SOLAS 74/83; USCG 164.018/4/0 approved; DOT-C2 Application: Ideal for life jackets, rafts, survival suits,
Outfits your truck or trailer for visibility, Applies to almost any surface, Peel and stick back, USA made, Retro-reflective Tape, Adds color to your truck. Tough, weather-resistant Daybright retro-reflective tapes are available in many colors, giving you plenty of options when outfitting your truck or trailer for enhanced visibility during the day and reflectivity at night. We?ve even seen customers apply this tape to toolboxes and tools to make them more visible. Applies to almost any surface. Sold in 1?
Reflective Tape, Red & White, DOT-C2, Price per Foot Clean surface very well and peal off back, apply and press. Must be over 50 degrees Availability: Usually ships in 2-3 business days Reflective Tape, Red & White, DOT-C2, Price per Foot Reflectape Regular price: $2.00 Sale price: $1.00
DOT-C2 (3 Pack) 2 in. x 18"Strips 5 Year Reflexite® Retroreflective Tape 11" Red 7" White DOT -C2 _2 _5YR11 -7KC _3 Description Reflexite® Conspicuity material is composed of cube corner (microprism) retroreflective elements integrally bonded to a flexible, smooth-surfaced, tough and weather-resistant UV-stabilized polymeric film. The prism surfaces are coated with a vacuum deposition of aluminum to provide a mirror surface to the prism facets. The resulting tape is not more than 0.008” thick and comes with
Dot Vehicle Reflective Tape $163.34 ea Customer Reviews For use on tractor trailers, flat beds, tankers, etc. Red & white striped (11" red, 7" white) Meets all federal and state specifications 2" x 50 yd. roll Reflectorization Requirements: ASTM D4956-93B Type V. NHTSA Conspicuity regulation: LS300 C-FP92, Eff. 12/1/93 Product Reviews