The scope riser allows optics to be raised 3/4" of an inch. The riser ensures proper scope height without the need for extra high rings. The riser is quick detachable, held in place by a full length spring loaded locking bar with two thumb screws. Accepts Weaver and STANAG rings on its Picatinny rail. Constructed of hard anodized aircraft grade aluminum.
Command Arms AR15/M16 Triple Rail Mounting System: Available as a single 3" Picatinny rail (TRM), two 2.5", 45 degree Picatinny rails (TRM2), or combined to provide a triple rail mount (TRM3) Use all 3 rails on lower handguards for grip with easy thumb access to light and laser on side rails or use 3" rail on bottom and 2.5" rail on top Allows easy tactical light operation while using a vertical grip and light mount Rails can be used independently of each other 45 degree rails will not interfere with iron
ProMag AR-15 / M16 Dual 45 Degree Picatinny Rail Handguard Mount Attaches to the vent holes on top of standard AR rifles/carbine handguard to provide 45 degree picatinny rails on each side.
Perfect for range shooting, the AR-15 Brass Catcher from Caldwell takes the hassle out of collecting your brass casings. The steel frame easily attaches to the Picatinny rail of any AR with a Mil-Spec anodized-aluminum clamp. Clamp and wire frame are fully adjustable and work with almost any scope mount, optic or sight brass enter the bag without interrupting cycling or disrupting the bolt function of the rifle. Multiple detent locking locations accommodate guns of varying thickness. Bag holds up to 100
Long Rail Kit for VRS 7" Versa Base. Features: VRS Long Rail for 7" V-RS Versa Base Customize the VRS for specific applications Mix full length & short rails with bumpers Add more rails as additional accessories are needed Fast configuration changes Mil. Std. 1913 Picatinny rail dimensions Fits all M4/AR15/M16 variants Mil. Spec. Type III anodized 6061 T6 aluminum construction Combat durable.
ProMag PM066 AR-15 Flat Top Picatinny Rail Scope Mount: Allows optics to be raised 3/4" Ensures proper scope height without the need for extra high rings Quick detachable </ul>
Brand New , Tactical Precision Machined Aluminum QD Weaver Picatinny 45 Degree Rear Flip Up Rapid Backup AR15 AR-15 M16 M4 M-4 Flattop A1 A2 Post Back Up Iron Sight Mount Fits Any Weaver / Picatinny Rail System. Military Quality 45 Degree Rear Flip-Up Sight Tower Complete with A2 Square Post Assembly with Locking Retention and Precision Elevation Adjustments for Greater Accuracy. Mounting Decks Designed to be Used with Handguard Rails and Both Will Fit All 7/8" Picatinny / Weaver Style Rails. Locking
Innovative vise block designed to secure any AR upper receiverMulti -function design - holds AR-15 and AR-10 uppersWorks with any Pic-Rail receiver by clamping the railTough extruded and machined aluminum constructionPrecise tolerances for a secure, trustworthy holdGreat for barrel nut removal /installation and many other tasksSecure most any AR-platform gun safely and securely in a vise with the Delta Series AR Upper/Picatinny Rail Vise Block from Wheeler. Designed to securely hold any AR upper receiver,
Official Ultimate Arms Gear, Brand New. Tactical AR15 AR-15 M4 M16 Combo Combination Kit Set Includes: Precision Machined Anodized Aluminum Carry Handle Step Down Quad 4 Weaver Picatinny Rail Gooseneck Z Mount + Ultimate Arms Gear Tactical 4 Reticle Red Dot Open Reflex Sight. 4 Different Reticle Designs for every Tactical Solution. 7 Brightness Settings. Tubeless Design. 1x Magnification. Objective (mm)-24x34. Unlimited Eye Relief. Multi-Coated Lens. Black Finish. Windage & Elevation Adjustments.
12" AR-15 Quad Rail 12 inch AR-15 Quad Rail 12" AR-15 Quad Rail Item # WX2-582166 Add gear to your gun, no problem! AR-15 Quad Rail. Here's a special deal on a 12" Quad Rail, perfect for adding a host of essential accessories. Lasers, flashlights, red dot, foregrip and much more. Get the most out of your AR-15 style rifle! Tactical cool! 4-rail Picatinny performance Fits full length gas rod guns Water -resistant anodized matte finish Precision machined for maximum strength Solid locking Easy installation,
It doesn't matter if you have an AR-15 or M16, these scope mounts are the way to go when you're looking for good quality, dependable bases for your optics .Available :MNT0902 Offering secure mounting within the fixed carry handle, this mount enables the shooter the option to utilize the iron sights while a scope is attached. Rail dimensions include all Picatinny/Weaver and STANAG interfaces. Imported.MNT0930 Fully machined from alloy with a matte black anodized finish, the AR15/M16 riser mount offers a
Command Arms AR15/M16 Dual Picatinny/Front Sight Rail Polymer: The Command Arms AR15/M16 Dual Picatinny/Front Sight Rail Polymer securely attaches to the AR15 style front sights Features 2 rails for laser, light and other mounting applications
UTG PRO Model 4/15 AR & M Carbine Length Quad Picatinny Rail System, OD Green UTMTU001G MTU001G Leapers UTG PRO Model 4/15 Carbine Length Quad Rail System Allen Wrench Mount Users Manual Rubber Rail Guard x 12 Hex Screw x 2 Leapers UTG Lifetime Limited Warranty The Leapers UTG PRO Model 4/15 Carbine Length Quad Rail System (OD Green) will add more functionality to your model 4/15 length carbine rifle. The Leapers Carbine Length Quad Rail Mount System has great zero retention and an easy installation with
Millett's Picatinny Style Drop Front Mount for M16/AR15 fixed carry handle platform rifles feature extremely durable aluminum alloy construction and adjustable accessory rails for easy customization. Allows co-witness with red dot sights.
Proudly Designed and Made in USAClever Top/Bottom Two-piece Design with Integral Spinal Cords/Alignment Housing for Perfect fit with Barrel Nut and Round Front CapMade from Aircraft Aluminum with Precision CNC Machining and Excellent Anodizing /EngravingFits Car. Length Model 4/15 and Provides Four Picatinny Rails Each with 14 SlotsGreat Zero-retention Capability for All Accessories Installed on the RailsEasy Installation with No Modification to the BarrelBlack Rubber Rail Guards IncludedNOTE: This quad
Attaches to the vent holes on top of standard AR rifles/carbine handguard to provide 45 degree picatinny rails on each side.
Official Ultimate Arms Gear, Brand New. Tactical Combat AR15 AR-15 M4 M16 Combo Combination Kit Set Includes: Precision Machined Anodized Aluminum Carry Handle Step Down Quad 4 Weaver Picatinny Rail Gooseneck Z Mount + Ultimate Arms Gear Tactical "CQB" Red-Green 4 Reticle Red Dot Open Reflex Sight Scope. Tactical "CQB" 4 Reticle Dual Red / Green Open Reflex Sight with Integral Weaver-Picatinny Rail Base. High quality aircraft grade aluminum construction, shock proof, fog proof, water resistant ideal for
Official Ultimate Arms Gear, Brand New. Tactical Combat AR15 AR-15 M4 M16 Combo Combination Complete Kit Set Includes: Precision Machined Anodized Aluminum Carry Handle Step Down Quad 4 Weaver Picatinny Rail Gooseneck Z Mount + 4 Reticle Red Dot Open Reflex Sight + Xenon Flashlight light + Red Dot Laser Sight. Ultimate Arms Gear Complete 4 Piece Set Includes: Ultimate Arms Gear 4 Reticle Red Dot Open Reflex Sight + Gooseneck Z Mount Carry Handle Step Down Quad 4 Weaver Picatinny Rail + Xenon Flashlight
The ATI Free Float Forend Handguard provides shooters with an endless number of options for mounting AR-15? accessories to the front of their firearm. For ultimate versatility, each Free Float Handguard offers Picatinny rail placement options at 45? increments the entire circumference of the forend for a total of 8 sides (Picatinny rails not included). The 8-Sided, ATI Free Float Forend Handguard is constructed of military type III anodized, 6061 T6 aluminum, making it virtually indestructible. A slotted
ATI A.5.10.1360 12 Aluminum AR-15 Picatinny Rail for Forend, Black ATI A.5.10.1360 12 Aluminum AR-15 Picatinny Rail for Forend, Black Features: Hard Coat Anodized T6 Aluminum Picatinny Rail Easy to Install Loctite on Screws Allows for Easy Attachments of all Your Favorite Gun Accessories Fits: AR-15 8-Sided Forends
Mako® AR-15 / M4 6" Quad Rail Mako® AR-15 / M4 6 inch Quad Rail Mako® AR-15 / M4 6" Quad Rail Item # WX2 -196501 Carbine -length with 4 Picatinny rails. Mako® AR-15 / M4 6" Quad Rail Mako®'s Quad Rail system replaces your M4's forend, enabling a rigid, super-sturdy platform for any and all Picatinny accessories. Tough enough to withstand constant pounding, simple enough to install without the help or knowledge of a gunsmith . Field -tested under extreme conditions for maximum performance and durability.
Proudly Designed and Made in USAClever Top/Bottom Two-piece Design with Integral Spinal Cords/Alignment Housing for Perfect Fit with Barrel Nut and Round Front CapMade from Aircraft Aluminum with Precision CNC Machining and Excellent Anodizing /EngravingFits Car. Length Model 4/15 and Provides Four Picatinny Rails Each with 14 SlotsGreat Zero-retention Capability for All Accessories Installed on the RailsEasy Installation with No Modification to the BarrelRevolutionary Pixodizing Technology Infuses Graphic
The TRUGLO Tactical AR-15 gas block sight is the industry’s BRIGHTEST AR-15 fiber-optic gun sight. Extra long, super bright, protected green fiber. Integral mount for Mil-Spec. 1913 Picatinny rails. Designed to mount on front gas blocks. Includes optional push-button light for use in complete darkness. CNC-machined construction. Green front.
One-piece, freefloating hand-guard has four full-length mil-spec M1913 Picatinny rails for a full range of mounting options. It also offers enhanced accuracy and reduced heat transfer. Machined from T6 aircraft aluminum and finished in mil-spec type-III hard-coat anodizing with Teflon. Tri-clamp locking system. Made in USA.Sizes: 11, 13. Type: AR-15 Forends. 11" Bravo Rail.
DUAL PICATINNY RAIL/FRONT SIGHT - Front sight mounted rails securely attach to AR15 style front sights. Features: Two rails for laser, light and other mounting applications; Polymer model.
10 Inch Length, 22 Mounting Sections, Four Sided Forend Rail, Picatinny Mil-Std Mount Compatible, Fits Carbine AR Firearm Platforms, Two Piece Free-Floating Design, Vented for Heat Dissipation, Aluminum Construction, The AR Quad Rail (10) from Barska is a lightweight yet durable forend accessory for mounting a bi-pod flashlight laser aiming device rangefinder and other tactical gear. This Quad Rail will fit AR-style carbines including the AR-15 M16 and M4. The 10 inch Picatinny rails include 22 sections and
ProMag AR-15/M-16 Flat-Top Picatinny Rail Aluminum Scope Riser - Allows scopes to be raised 3/4" to ensure proper height without extra high rings - Made from hard anodized aircraft-grade aluminum - Secures with a full-length, spring-loaded locking bar with 2 thumb screws - Picatinny rail accepts Weaver and STANAG rings - Quickly detaches ProMag AR-15/M-16 Flat-Top Picatinny Rail Aluminum Scope Riser
6.7 quad rail handguard in flat dark earth for use with AR-15 rifles, installs seamlessly on any carbine length AR-15 platform Equipped with 4 Picatinny rails, for attaching tactical accessories such as bipods, flashlights, and laser sights 2 piece drop-in design, easy install with included hex key Aircraft grade aluminum construction, both sturdy and light weight, only 12 ounces in weight Finished in flat dark earth to match your other flat dark earth AR-15 accessories
ATI A.5.10.1210 AR-15 Aluminum 8-Sided Carbine Length Two Piece Forend & Combo Rail Package with Delta Ring, Black ATI A.5.10.1210 AR-15 Aluminum 8-Sided Carbine Length Two Piece Forend & Combo Rail Package with Delta Ring, Black Features: Military Type III Anodized, 6061 T6 Aluminum 8-Sided Carbine Length Two Piece Forend Insert Rails at 45 Degrees Angles Around the Circumference of the Forend for Ultimate Versatility and More Natural Placement of Accessories Mounting Long Distance Optics on the Top Rail