Pelco CT8301ASFCR 1-CH Video Fiber Transmitter w/Conformal Coating - Single Mode (FC Connector) , 8-Bit Resolution, Single Fiber, 28.6 Mile (46km) Range, AC/DC, NTSC/PAL/SECAM CT8301ASFCR 1-CH Video Video Transmitters & Receivers CT8301ASFCR 1-CH Video Fiber Transmitter w/Conformal Coating - Single Mode (FC Connector)
Pelco CR85011ASFCR 1-Channel Video Single Mode Fiber Receiver with Conformal Coating (FC Connector) , 28.6 Mile (46km) Range, 8-Bit Digital Encoding, Single Fiber, Coaxitron Control, Meets NEMA TS 2 & Caltrans, AC/DC, NTSC/PAL/SECAM CR85011ASFCR 1-Channel Video Video Transmitters & Receivers CR85011ASFCR 1-Channel Video Single Mode Fiber Receiver with Conformal Coating (FC Connector)
Draper Infrared Remote Transmitter /Receiver - Requires Low Voltage Control Module (LVC-III) Infrared Remote Transmitter /Receiver Draper Projector Screen Control Switches Infrared Remote Transmitter /Receiver
Transition Networks's analog composite video media transmitter, J/VD-TX-01, converts a CCTV signal from cameras to multimode or single mode fiber for up to 10 km. All conversion is performed in real time. Automatic gain control installed on both Transmitter and Receiver maintains desired quality of video's contrast and brightness for extended distances. No field adjustments are necessary. Wide input range power supply allows for multiple choices of power source including camera power supply.
"Sennheiser SR2020-D-US Dual Rack-Mountable RF Transmitter /Receiver Kit, Single-Channel RF Transmission, License-Free, 2 Rack-Mount Transmitters, 5 Stethoset Receivers, Mic/Line XLR Input, 48V Phantom Power, 1/4"" Headphone Jack SR2020-D-US Wireless Headphone Systems SR2020-D-US Dual Rack-Mountable RF Transmitter /Receiver Kit"
LTC 4671/60, 850NM FOM, TRANSMITTER /RECEIVER , RS-485 DATA, 120VAC, 60HZ. | LTC 4671/60, 850NM FOM, TRANSMITTER /RECEIVER , RS-485 DATA, 120VAC, 60HZ. LTC 4671/60 $385.00 LTC 4671/60, 850NM FOM, TRANSMITTER /RECEIVER , RS-485 DATA, 120VAC, 60HZ. Our Price : $385.00 Surveillance Video Part Number # LTC 4671/60
Are you tired of the cluttered look of your home theater set up? Do you want to mount your flat-panel perfectly and cleanly on your wall? Well, with help of Brite-Views Air HD, you can go wireless and make your oversized or unsightly equipment disappear in a flash. The Air HD works by transmitting High-Definition content from a Blu-ray player in a separate room to the HDTV sitting in your living room, or to another display in the kitchen, bedroom, or den. The Air HD Wireless Transmitter and Receiver Kit
300 ft Line Of Sight 4 Channel Opperation Auto Switch Receiver The 2.4 GHz Pocket Video Transmitter is so easy to use anyone can convert a wired camera to a wireless camera. Our Pocket Video Transmitter features 4 Channel Operation and is perfect for body-worn applications.Easy 3 Step Use: Wireless Video Transmitter /Receiver Plug any AV source into transmitter. Connect receiver to any TV or recording device. Sit back and watch the action. The batteries last approximately 3-4 hours when connected to the
Enables you to relocate and hide your AV components in order to postion your TV (or projector) in the cleanest way. The HD Video Wireless kit is comprised of transmitter and receiver that allow you to wirelessly transmit uncompressed High-Definition video from any HD video source device to your HDTV (or projector) anywhere. For example, the TV positioned in Kitchen can display the contents of the Blu-Ray player in the living room. HD wireless video transmitter provides the function as the source gateway, in
Connect the transmitter with the audio and video equipment by A/V cable,turn on the power of the Transmitter and receiver,It transfer the video and audio signal to another TV/monitor.It usually be used for surveillance system,DVB-TV system,watch DVD disks and so onSpecification :Working frequency :2 .4Ghz2414MHZ /2432MHZ /2450MHZ /2468MHZ Range:up to 150m free field,up to 35m through walls and ceilings Power:AC Power Channel:4 CH selectedAudio :StereoTransmitting Power:2W
TRANSMITTER: * Frequency: 2.4 GHz-2.4835 GHz * 3 Selectable Channels * FM Modulation * A/V Input Jack RCA to RCA Line Input Jacks * Antenna: Dipole with SMA Connector * 12V DC Power Supply * Input Level: Video-1Vp-p (NTSC/PAL) Audio-1Vp-p (NTSC/PAL) * Impedance: Video-75 Ohms Audio-600 Ohms (NTSC)/10K Ohms PAL * RF Output Power: 10dBm RECEIVER: * Frequency: 2.4 GHz-2.4835 GHz * 3 Selectable Channels * A/V Output Jacks - RCA to RCA Line Output Jacks * Antenna: Dipole with SMA Connector * 12V DC Power Supply
*Transmitter /receiver set lets you watch HDTV without bulky equipment in the room *Brite-View omnidirectional antenna has a range of 70 feet (20 meters) *Your home theater will never be the same *Transmits and receives in real high-definition *Image quality up to 1080p at 24 or 30 frames per second or 1080i at 60fps picture quality *No Latency when playing high-definition video games *256-bit AES encryption means your wireless video transmission is secure *Auto set-up provides plug-n-play simplicity
Trango 5.8Ghz Video/Audio Receiver for Falcon Plus Available in Right or Left-hand Polarization, select in options below. Operates in the 5.8 GHz ISM band. FalconPLUS 1-Mile 5.8GHz System FalconPLUS 1-Mile System consisting of: 1 VTX5900 5.8 GHz Transmitter (Tx) 1 VRX5900 5.8 GHz Receiver (Rx) 1 AD5900-15-RP 15 dBi Patch Antenna (Tx) 1 AD5900-15-R 15 dBi Patch Antenna (Rx) 2 Power Adapters (7 VDC/800 mA) Mounting brackets Note: Never order more than 6 systems with the same antenna polarization (R VS. L) for
Wireless Extreme Grade Transmitter up to 30 miles System This One Watt Outdoor 2.4GHz transmitter will transmit a video signal to the receiver that connects to the video-input jack on your VCR, TV, or computer. The Extreme Grade Transmitter is capable of transmitting live video up to 30 miles , line of sight, without the use of high gain antennas. The transmitter and receiver are each built into NEMA4 rated weatherproof housings, perfect for outdoor applications. The Extreme Grade Transmitter is FCC Part 90
Active Balun Transmitter and Receiver kit . Support Video and Data (RS485 /422) Gain and brightness adjustment. Power supplies included
"www.spcontrols.com CatLinc VID allows composite video connection and unbalanced stereo audio connection between two devices using CAT5, CAT5e, or CAT6 twisted pair cable. The CatLinc VID supports NTSC, PAL, or SECAM video signals. Connection is made to devices using 3 standard RCA connectors. Power Connector: 3.5mm O.D./1.3mm I.D. Center pos(d) Minimum/Maximum levels: 0.3V to 1.5V p-p Impedance: 75 ohms CatLinc VID Transmitter CatLinc VID Receiver Video Extender/Console CATLINC VID 3 Year 3 Year Limited SP
This receiver is ideal for sending CCTV surveillance video over long distances to a monitor, multiplexer or video recorder. Must be paired with a balun transmitter and connected with Cat. 5 cable.
The 5.8GHz wireless video/audio sender consists of one transmitter and one receiver. This device transmits wirelessly vivid video and hi-fi stereo sound from a VCR, TV set, LD, DVD, VCD, Satellite Receiver or cable set top box to any TV or monitor. It ...
No interference, high bandwidth, and low cost for CCTV to fiber.
OPEN BOX Product. 30-Day Money-Back Satisfaction Guarantee!