lcr meter

Extech 380193 Passive Component LCR Meter

Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance) Max/Min/Avg recording Builtin test fixture or use external test leads Open and Short Zero removes unwanted stray impedances from the measurement Relative mode with zero reference or user supplied reference Auto power off Automatic blown fuse indication Powered by 9V battery or optional AC adaptor

LCR-816 LCR Meter 100Hz-2kHz

LCR Meter 100Hz-2kHz

Instek LCR-817 LCR Meter 12Hz-10kHz

LCR Meter 12Hz-10kHz

Instek LCR-821 Multimeter, High precision LCR Meter 12Hz - 200kHz

Instek LCR-821 Multimeter, High precision LCR Meter 12Hz - 200kHz Instek LCR-821 Multimeter, High precision LCR Meter 12Hz - 200kHz LCR821 Test Frequency 12Hz ~ 200kHz (504 steps) Basic Accuracy 0.1% Test Signal Levels 5mV ~ 1.275V (5mV/step) DC BIAS External 2V Internal 0 to 35V Display Range Impedance /Resistance R 0.00001Ù ~ 99999kÙ Capacitance C 0.00001pF ~ 99999µF Inductance L 0.00001mH ~ 99999H Quality Factor Q 0.0001 ~ 9999 Dissipation Factor D 0.0001 ~ 9999 Impedance |Z| 0.00001Ù ~ 99999kÙ Phase

Instek High Precision LCR Meter 12Hz-100kHz (LCR-819)

FEATURES: Test Frequency: 12Hz to 100kHz Continuously Variable Frequencies 0.05% High Measurement Accuracy 100 Sets Memory for Save/Recall of Setup State R/Q, C/D, C/R, L/Q Test Modes Absolute Value, Delta Value, and Delta% Measurement Display 240 x 128 dot Matrix LCD Display Test Condition and Test Result shown on the screen Simultaneously Option: RS-232C Interface, Including LCR-Viewer Software Specifications: Test Frequency: 12Hz ~ 100kHz (503 steps) Basic Accuracy: 0.05% Test Signal Levels: 5mV ~ 1.275V

LCR Meter 19999 Count Dual Frequency Dual Display

Universal LCR MeterThis high precision, full featured handheld meter measures capacitance, resistance and inductance. Components can be measured at either 120Hz or 1KHz, in series or parallel modes as desired. The 4½ digit, 19,999 count LCD display also features a secondary 3 digit 1,000 count display which reads dissipation factor (D) or Q.

LCR-8101 Instek 1MHZ LCR Meter,

:: LCR-8101 Instek 1MHZ LCR Meter, LCR-8101 Instek 1MHZ LCR Meter, FEATURES Test Frequency 20Hz ~ 1 MHz 6-Digit Measurement Resolution DC Resistance Measurement Monitoring of DUT Voltage and Current 0.1% Basic Measurement Accuracy Comprehensive Measurement Functions Pass/Fail Test RS-232 & GPIB Interface Large LCD Display Optional Graph Mode SPECIFICATIONS TEST FREQUENCY 20Hz ~ 1MHz, 5 Digits, ±0.005% INPUT IMPEDANCE 100Ω BASIC ACCURACY ±0.1% (R, Z, X, G, Y, B, L, C) TEST SPEED AC DC MAX: 75mS MAX: 30mS

Extech 380193 Passive Component LCR Meter

Extech Passive Component LCR Meter

> Extech Passive Component LCR Meter - Choose from our comprehensive line of Extech LCR Meter and other Component Testers products. Extech Passive Component LCR Meter Extech Passive Component LCR Meter Passive Component LCR Meter [EH380193] $199.99 (USD)

Precision LCR Meter,

HP / Agilent 4285A Precision LCR Meter, 75 kHz to 30 MHz in 100-Hz steps 0.05% basic accuracy, 6-digit resolution Test signal level (Option 001): 5 mV to 20 rms, 50 µA to 200 mA rms 10-bin component sorting-comparator 0.1% basic accuracy High-speed measurements: 30 ms/meas. List sweep measurement capability Available Options, Below Hewlett Packard 4285A LCR Meter Shown Product Information 510 KB HP 4285A precision LCR meter is a cost-effective solution for component and material measurement. It can be used

Passive Component LCR Meter

Extech Passive Component LCR Meter Passive Component LCR Meter 380193 24.00 (10.71%)/Unit $199.99 Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R). Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance). Set Hi/Lo limits using absolute values or percentage limits. Parallel or Series equivalent circuit. Automatic blown fuse indication. Built-in test fixture or use external

LCR Meter

LCR Meter DLM-240 US $132.03 EA US $125.42 EA US $118.82 EA 3-1/2 Digit LCD Capacitance to 2000uF Inductance to 200H Resistance to 20M Ohm Two Year Warranty Test Lead to Alligator Clips 6.32 EA Included Protective Holster for DMR-3600 12.22 EA

Extech 380193 - Extech Passive Component LCR Meter

Extech 380193 - Extech Passive Component LCR Meter Extech Measures capacitance and inductance to 0.7% and resistance to 0.5%. Features simultaneous 20,000/10,000-count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation), or R (resistance). Has test frequencies of 120Hz and 1kHz. Hi/Lo limits can be set using absolute values or percentage limits. Selectable parallel or series equivalent circuit. 4-1/2 digit backlit LCD display provides resolution to

Passive Components LCR Meter

:: Passive Components LCR Meter Passive Components LCR Meter Features : • Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance) • Set Hi/Lo limits using absolute values or percentage limits • Selectable Parallel or Series equivalent circuit • 4-1/2 digit backlit LCD display • Max/Min/Avg recording with Auto power off • Built-in test fixture or use external test leads • Open and Short zero removes unwanted

LCR Meter Passive Component - Extech 380193

LCR Meter Passive Component - Extech 380193 EXT-380193 Description Passive Component LCR Meter Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R) Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance) Set Hi/Lo limits using absolute values or percentage limits Parallel or Series equivalent circuit Automatic blown fuse indication Built-in test fixture or use external test leads

Extech Passive Component LCR Meter

This meter will accurately measure capacitors, inductors and resistors using the test frequencies of 120Hz and 1kHz.

Bench LCR/ESR Meter with Component Test

Bench LCR/ESR Meter with Component Test Fast, Reliable, and Versatile Testing Measurement parameters: Z, L, C, DCR, ESR, D, Q,ACV, DCV,ACA, DCA and O Test conditions: 100Hz, 120Hz, 1kHz, 10kHz, 100KHz, 200KHz, 1Vrms, 0.25Vrms, 0.05Vrms 0.1% basic accuracy Dual LCD display Fully auto/manual selection DC resistance measurement RS-232 interface capability The 889A Synthesized In-Circuit LCR/ESR Meter is a high accuracy test instrument used for measuring inductors, capacitors and resistors with a basic accuracy

Instek High Precision LCR Meter 100Hz-2kHz (LCR-816)

FEATURES: 100Hz to 2kHz, Continuously Variable Frequencies 0.1% Measurement Accuracy 100 Sets Memory for Save/Recall of Setup State R/Q, C/D, C/R, L/Q Test Modes Absolute Value, Delta Value, and Delta% Measurement Display 240 x 128 dot Matrix LCD Display Test Condition and Test Result shown on the screen Simultaneously Option: RS-232C Interface, Inculding LCR-View Software Specifications: Test Frequency: 100Hz ~ 2kHz (245 steps) Basic Accuracy: 0.1% Test Speed: 68mS Test Signal Levels: 0.1V ~ 1.275V

High Accuracy, 1 kHz/120Hz, Programmable Impedance / LCR Meter

Tegam 3525 High Accuracy, 1 kHz/120Hz, Programmable Impedance / LCR Meter 35338EC Tegam 3525 $1,895.00 USD The Model 3525 is TEGAM's ultimate solution for applications that require low-cost, high-accuracy impedance parameter testing. The instrument measures L, C, R, RP, RS, |Z|, D, Q, Phase, V & I starting at a basic accuracy of 0.08% It is designed for manual or remote operation and is very simple to use The Model 3525 performs basic LCR measurements better than Agilent's "most cost-effective solution" at

Instek LCR-816 LCR Meter

Instek LCR-816 LCR Meter Instek LCR-816 LCR Meter INSTEK LCR-816 $900.00 $810.00 - You Save $90.00! Instek LCR-816 LCR Meter Instek LCR-816