impedance transformer

ART S8 Microphone Splitter 8 Channel Balanced Low Impedance Fully Transformer Isolated

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals eight pairs. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct outputs to the main or Front-of-House mixer, and the second isolated outputs being sent to a monitor or recording mixer. The direct outputs pass phantom power from the main mixer to the microphones for use with

Whirlwind Imp 2 Transformer Direct Box

The Whirlwind IMP 2 Direct Box is built rugged on the inside and outside. This is the world famous DI found in pro systems everywhere. The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal. Whirlwnd IMP 2 Features: 1/4 inch parallel wired in and out jacks Ground Lift switch to help isolate hum and buzz Uses Whirlwind's TRHL transformer It's the ideal direct box for anyone requiring professional quality and durability in an economical package. What's a

Lehle P-Split II Passive High Impedance Splitter

The P-split makes it possible to route an instrument to two amplifiers simultaneously with no noise or hum. The patented LHTZ high-end transformer is specially designed to cleanly split both low and high impedance signals, making the P-plit a perfect passive DI box as well.

RDL Electronic Transformer Pair

Perfect for any line amplification, impedance or balanced/unbalanced conversion, this two channel line amplifier features bridging inputs, adjustable gain (up to 20db), or attenuation, and low impedance outputs, which act as both an electronic line transformer and a line amplifier. True DC amplifiers produce unsurpassed audio clarity, high common-mode rejection and ultra-low distortion. Typical applications: Balanced to unbalanced conversion Unbalanced to balanced conversionHigh to low impedance conversion

Pro Co Sound LOT-1 - Line Output Low Impedance Component Transformer

Pro Co Sound LOT-1 - Line Output Low Impedance Component Transformer PRLOT1 LOT-1 Proco LOT-1 is low-impedance line output component transformer with a 1:1 600-Ohm or a 1:2 step-up 150- to 600-Ohm rating. it is designed for use in the IT-4 isolation transformer box. The LOT-1 features a custom 4-winding design with broad-band, low-distortion performance and premium transient response. Pro Co Sound LOT-1 - Line Output Low Impedance Component Transformer

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-77 Comes with built-in High/Low switch. No wiring necessary. 1/4" Female phone jack 600 ohm input to 1/4" male phone plug 50K output with 6 inch cable. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-87 Comes with High/Low switch built in. No wiring necessary.1/4” Female phone jack switchable input between 600ohm/50K to 600 ohm XLR female output. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male to

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-86 Comes with built-in High/Low switch. No wiring necessary. 1/4” Male phone plug switchable input between 600 ohm/50K to 600 ohm XLR male output with 6 inch cable. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output.

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-89 Comes with High/Low switch built in. No wiring necessary. 1/4” Female phone jack switchable input between 600 ohm/50K to 600 ohm XLR male output. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male to

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-88 Comes with High/Low switch built in. No wiring necessary. XLR Male switchable input between 600 ohm/50K to 600 ohm XLR female output. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male to 1/4" Male

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-99 Comes with High/Low switch built in. No wiring necessary. 1/4” Male phone plug switchable input between 600 ohm/50K to 600 ohm XLR female output with 9 inch cable. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output.

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-79 Comes with built in High/Low switch. No wiring necessary. 1/4” Male phone plug switchable input 600 ohm/50K to 600 ohm XLR male output. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male to 1/4" Male

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

DUAL IMPEDANCE LINE MATCHING TRANSFORMER CAD 10-76 Comes with built-in High/Low switch. No wiring necessary. 1/4" Male phone plug switchable input between 600 ohm/50K to 600 ohm XLR female output. DUAL IMPEDANCE MATCHING LINE TRANSFORMERS Permits use of low impedance microphone into a high impedance input. No wiring necessary. 10-76 1/4" Male phone plug to XLR Female. 500 Ohm Input, 50K Ohm Output. 10-77 1/4" Female phone jack to 1/4" phone plug, w/6" cable. 600 Ohm Input, 50K Ohm Output. 10-79 XLR Male to

Transformers - Audio Transformer - IMPEDANCE MATCHING

TTPC-6 Description: (TTPC6)

Chameleon Labs 7602 MKII MIC Pre / EQ Mic and Transformer Upgrade

The Model 7602 MKII is the sequel to Chameleon Labs smash hit 7602 Microphone Preamplifier /Equalizer . The 7602 MKII new features include: selectable mic impedance, LED input metering, upgraded knob styles, and two different power options?all of this...

Pro Co Sound IT8A 8-Channel Rackmountable Balancing Isolation Transformer

Cables & In Line Accessories Pro Co Sound IT8A 8-Channel Rackmountable Balancing Isolation Transformer IT8A PRIT8A Pro Co IT-8A is the perfect piece for a variety of applications where transformer-floated outputs are a necessity. The IT-8A provides eight channels of high-quality solution for interfacing problems including being used as a direct box, breaking ground loops between balanced and un-balanced lines, minimizing interference from SCR lighting dimmers, radio transmitters and 60Hz AC power wiring and

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

Hammond 1640SE Output Transformer

The SE series is designed for single-ended tube output circuits. Each unit includes a 40% screen grid tap for Ultra-Linear operation. Black matte finish. Audio Watts: 50, Primary Impedance: 1,250.

Passive DI, Ground Lift, Jensen Transformer, 10-80kHz

JDI-MK3 Passive DI, Ground Lift, Jensen Transformer, 10-80kHz List Price: $220.00 Our Price: $199.99 The JDI is great for guitars, bass, and keyboards and is particularly adept with high-output, broadband instruments such as active instruments and digital keyboards. The JDI may be rack-mounted using the J-Rak and is also available in a stereo (2-channel) version called the JDI Duplex and the 6-channel rack-mountable JD6. The Radial JDI is considered by many to be the world’s finest direct box. It is a

RDL ST-DA3 1X3 Portable Distribution Amplifier Electronic Transformer - Stick-On Design

RDL ST-DA3 1X3 Portable Distribution Amplifier Electronic Transformer - Stick-On Design $173.93 Now $121.00 ST-DA3 RDL-STDA3 Description Specifications The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3™s wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for

TOA LT-102 Output Transformer for use with D-1103, E-1231, E-232 and L-1102 Signal Processors

» LT-102 TOA LT-102 Output Transformer for use with D-1103, E-1231, E-232 and L-1102 Signal Processors Part No: LT-102 List: $94.00 Sale Price: $70.50 TOA LT-102 Output Transformer - The LT-102 is an output transformer. This transformer can be easily connected to the 1000 series using connectors. Impedance: 600 ohms : 600? ohms. Line output transformer for D-1103, E-1231, E-232. The LT-102 is an output transformer. This transformer can be easily connected to the 1000 series using connectors. Impedance: 600

Whirlwind ISO8Q Transformer Isolation Unit

Whirlwind ISO8Q Transformer Isolation Unit Whirlwind ISO8Q Transformer Isolation Unit Sometimes a ground lift isn't enough to do the job. The ISO-8 is a valuable part of systems where different pieces of gear are connected across long lines. Frequency Response: 20Hz-20kHz ±0.5dB at +10dBm input Maximum Input Level: +28dBm Input Impedance: 600 Ohms Output Impedance: 600 Ohms Sometimes a ground lift isn't enough to do the job. The ISO-8 is a valuable part of systems where different pieces of gear are

Bridging Transformer

A15BT Bridging Transformer $59.17 $46.40 (each) This Balanced transformer has a 33,000 Ohm primary (three-socket) end and either a 7500 Ohm or 600 Ohm secondary (three-pin) end. Either end can be Unbalanced by connecting pins 1 and 3. The A15BT solves problems of matching, bridging, or isolating Balanced or Unbalanced devices of different impedances and levels. Voltage loss from the 33,000 Ohm primary to the 7500 Ohm secondary is 6.4 decibels; to the 600 Ohm secondary, it is 17.4 decibels. To couple a

Lehle LTHZ transformer

Lehle P-Split II Second Generation The Lehle P-Split II stands for "passive splitting" with maximum signal fidelity, making it possible to route an instrument to two amps simultaneously. The outputs are electrically isolated from one another by the Lehle LTHZ high end transformer, so hum loops are excluded from the start. The Lehle LTHZ transformer is specially designed for use with high-impedance signals, but also splits low-impedance signals with line levels cleanly and reliably. It provides the signal

Audio Transformers-75mW Max Output

:: Audio Transformers-75mW Max Output Audio Transformers-75mW Max Output Ultraminiature Core Type EI-1A, 75mW Max Output Impedance Primary(ohms) Impedance Sec.(ohms) Resistance Primary(ohms) Resistance Sec.(ohms) Application (Typical) 42TL023 300 CT 600 CT 30 35 Coupling 42TL016 600 CT 600 CT 65 65 Coupling 42TL020 600 CT 900 CT 36 50 Coupling 42TL027 1K CT 2K CT 130 140 Coupling 42TL022 1.5K CT 600 CT 120 55 Coupling 42TL021 4K CT 600 CT 148 62 Coupling 42TL019 10K CT 600 CT 450 100 Coupling 42TL024 10K CT

Audio Tube Transformer 15W 80mA

Audio Tube Transformer 15W 80mA 125ESE Qty: 1 - 2 US $67.17 EA Qty: 3 - 4 US $63.82 EA Qty: 5 + US $60.46 EA Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100Hz. - 15Khz at full rated power (+/- 1db max. - ref. 1 Khz) Open style with minimum 12" long primary & secondary leads All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation Primary impedance range from 2,500 to 10,000 Ohms Secondary

DUAL IMPEDANCE LINE MATCHING TRANSFORMER

Bobbin 300-3500 Hz Stancor / White-Rodgers 600 Ohms Audio Transformer, Impedance Matching; Pri:600 Ohms; Sec:600 Ohms(CT Split); 80mA; 1.1dB

Jensen JT-11P-1 Line Input Transformer

Jensen JT-11P-1 Line Input Transformer 1:1 for "Balanced Bridging" Inputs This transformer is designed for use in wideband line input stages. Distortion remains very low and CMRR remains high, even when driven by high source impedances. The primary is fully balanced and its leads may be reversed to invert polarity, if required. A 30 dB magnetic shield package is standard. Ideal for balancing any high-impedance unbalanced input Wide bandwidth: !3 dB at 0.25 Hz and 95 kHz Recommended for levels up to +20 dBu

Audio Isolation Transformer

Audio Isolation Transformer Audio Isolation Transformer Audio Isolation Transformer Features: Impedance: AGL-10K: 10K Ohm Input & Output. AGL-600: 600 Ohm Input & Output Bandwidth: 300KHz Isolation: 100 Megohms, minimum Insertion Loss: Less than .5dB Package: Hi-Impact ABS Plastic AGL-10K Input & Output Connector: 1/4" Phone Jack Input & Output AGL-600 Input & Output Connector: 3 Pin XLR Female Input, 3Pin XLR Male Output Dimensions: 3-3/4" x 2-5/8" x 1-1/2" Audio Isolation Transformers Easy to Use True