The Drawmer DL251 Spectral Compressor, incorporates a variable 'Dynamic Spectral Enhancement' (D.S.E.) section which eliminates the problems associated with full band compressors by restoring the high frequency energy lost during the full band compression process. This enhancement circuitry is extremely effective where compression and limiting are employed for broadcast transmission, or across complete mixes in a stereo mixdown situation. Dynamic Spectral Enhancement has many creative applications
The DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the industry standard gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer designed the DS404 Quad Noise Gate utilizing new and unique Program Adaptive circuitry. This makes the DS404 ideally suited for use over a wide range of input signals,
Drawmer MX60 Front End One Shipping MF.180398 Microphone Preamp. Made by Drawmer. (MF.180398) : Multi-band 'tube saturation' allows you to create subtle warming, high frequency effects or out-and-out obvious effects via three separate, independently adjustable audio bands. Low settings on all bands enable replication of classic tube mic sounds. - The MX60 draws its technology from the most successful of Drawmer products. The mic preamp features the same discrete component design found in the legendary
Shipping MF.180397 Sound Enhancer. Made by Drawmer. (MF.180397) The MX50 is a flexible, simple to set up dual De-Esser designed to fulfil the needs of the Recording Studio, Broadcast, Theatre and Live Sound Industries. Its classic application is to overcome the problems that can arise when sibilant sounds (S's and T's) are over-emphasised by the human voice, with such other applications as 'smoothing' a stereo mix, reducing string noise on acoustic guitars or breath noise on flutes, even refining cymbal and
Drawmer DL 241XLR 2-Channel Compressor Shipping MF.180373 Compressor. Made by Drawmer. (MF.180373) Has features, displays and control functions that make it outstanding for broadcast, sound reinforcement, and recording applications. Drawmer's unique "Programmed Adaptive Expansion" circuitry allows effective single control operation' producing a fast smooth response and eliminating chatter' on or around threshold. This design differs from that of conventional Expanders in that the Expansion Ratio, Hold
Drawmer 1969 Mercenary Edition Mic Pre Amp/Tube Compressor Shipping MF.180379 Microphone Preamp & Compressor. Made by Drawmer. (MF.180379) The 1969 Mercenary Edition, derived from a collaboration between two of the audio industry's most established names, Drawmer (UK) and Mercenary Audio (USA), Fletcher - Producer/Engineer, Mercenary Audio incorporates new tube circuits designed to add warmth to mic/line signals, and the instrument (DI) pre-amp has its own tube stage enabling classic overdrive effects when
Drawmer DL441 Quad Auto Compressor/Limiter Shipping MF.180387 Compressor. Made by Drawmer. (MF.180387) Bypass - A fully balanced hard-wire bypass connects the input directly to the output allowing signal to pass through the unit with no power applied. Metering - Comprehensive bar graph displays give 'at a glance' indications of gain reduction, and input/output signal level Gain reduction from 1dB to 30dB is shown simultaneously with signal level from 10dB to +10dB. When the channel is in BYPASS the output
Drawmer DL251 Drawmer DL251 Drawmer DL251 Description It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow attack time improves matters to some extent, but signals containing many harmonics (eg: vocals,
Home» Drawmer DL251 2-Channel Spectral Compressor/Limiter List Price: $1,025.00 Product Description: The Drawmer DL251 'Spectral Compressor', incorporates a variable 'Dynamic Spectral Enhancement' (D.S.E.) section which eliminates the problems associated with full band compressors by restoring the high frequency energy lost during the full band compression process. This enhancement circuitry is extremely effective where compression and limiting are employed for broadcast transmission, or across complete
Drawmer DL-251 Spectral Compressor [DL-251] $1,080.00USD It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow attack time improves matters to some extent, but signals containing many harmonics (eg: vocals,
Drawmer DS404 Drawmer DS404 Drawmer DS404 Description The DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the 'industry standard' gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer have designed the DS404 Quad Noise Gate utilizing new and unique 'Programme Adaptive' circuitry. This makes the
DRAWMER DL251 Spectral Compressor [DRA-DL251] € 1.109,31 It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow attack time improves matters to some extent, but signals containing many harmonics (eg: vocals,
DL251 Drawmer DL251 Drawmer DL251 It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow attack time improves matters to some extent, but signals containing many harmonics (eg: vocals, strings and brass) or
DS404 Quad Noise Gate DS404 - Quad Noise Gate Product Information: The DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the 'industry standard' gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer have designed the DS404 Quad Noise Gate utilizing new and unique 'Programme Adaptive' circuitry.
» Drawmer DS404 Quad Noise Gate Product Information: The DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the 'industry standard' gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer have designed the DS404 Quad Noise Gate utilizing new and unique 'Programme Adaptive' circuitry. This makes the
Shipping MF.180393 Digital Sync Box. Made by Drawmer. (MF.180393) The D-Clock is a dual input/twenty output word clock distributor with a 16 character blue LCD display providing a reference measurement of the incoming sample rate. Both AES/EBU and BNC word clock inputs feature a zero latency loopthrough output with switchable high impedance to maintain the correct level of the digital signal for onward distribution. The D-Clock displays incoming sample frequencies up to 768 kHz to an accuracy of 2ppm (parts
DRAWMER DS404 Quad Noise Gate [DRA-DS404] € 1.222,13 The DS404 Quad Noise Gate has been designed to the highest specification to complement the DS201 Dual Noise Gate, acknowledged as the 'industry standard' gate throughout the world. Recognizing that there are many general gating applications which require equipment that is simple to operate and which occupies the minimum of rack space, Drawmer have designed the DS404 Quad Noise Gate utilizing new and unique 'Programme Adaptive' circuitry. This makes the
Drawmer - DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ DL251 DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ Description: It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow
Drawmer - DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ DL251 DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ Description: It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow
Drawmer - DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ DL251 DL251 - 2 Channel Auto/Man Compressor + Limiter + Dynamic EQ Description: It is well known that compression, in its basic form, tends to remove high frequencies from any material with a wide bandwidth. This is because material usually has less energy at high frequencies than it does at low frequencies and since single band compressors are not frequency conscious, the 'highs' are attenuated together with the 'lows'. Using a slow