- Refine By >
Ideal for drilling cable pathways between studs and joists The adapter tool is 6 1/2" long end to end (but with 1/2" of the shaft in your drill chuck the tool is 6" overall long) From the end of your chuck (with adapter mounted in your chuck) to the drill bit centerline is 5.000" The width of the right angle of the tool from back of tool to the tip of the attachment chuck is 4.000" Tool made of a 1" METAL round tube. A hex designed shaft mounts in your drill for a no slip interface.
Shop for Power Tool Accessories at The Home Depot. Increase the productivity and versatility of your existing drill with the DEWALT DWARA50 Right Angle Drill Adapter. Just tighten this adapter in your chuck and you instantly have access to tight and hard to reach spaces. For use with both corded and cordless drills.
Milwaukee, 49-22-8510, Drills / Drivers,NA, Power Tools, Expansion Tool 90- Offset Drive Adapter - Right Angle Attachment Features: Allows contractors to drive screws and drill holes in tight, difficult work areas This attachment is ideal for cordless drills and accepts standard 1/4-inch hex shank bits Durable all-metal housing and steel gears with ball bearing construction Rated to handle up to 235 inch-pounds of torque Compact design measures only 2 inches wide allowing it to fit in tight spaces where
Milwaukee 3107-6 Specifications: • Voltage: 120V AC • Chuck Size: 1/2" • Amps: 7 • Capacity in Steel: 1/2" • No Load RPM (without 90? adapter): 0-500 • No Load RPM (with adapter): 0-335/0-500/0-750 • Chuck Type: Keyed • Gear Train: Quadruple • Cord Type: 8' Quik-Lok • Construction Type: Grounded • Length: 16-3/4" • Tool Weight: 10.3 lbs. Milwaukee 3107-6 Includes: • Right Angle Drive (48-06-2871) • 9/16" Open End Wrench (49-96-4060) • 3/16" Socket Wrench (49-96-0080) • Chuck Remover Bar •
DWARA50 DEWALT Right Angle Drill Adapter ( NEW IN BULK PACKAGE )
Milwaukee 3102-6 Specifications: • Voltage: 120V • Chuck Size: 1/2" • Amps: 7 • Capacity in Steel: 1/2" • No Load RPM (without 90? adapter): 500 • No Load RPM (with adapter): 335/500/750 • Chuck Type: Keyed • Gear Train: Quadruple • Cord Type: 8' Fixed • Construction Type: Grounded • Length: 16-3/4" • Tool Weight: 10.3 lbs. Milwaukee 3102-6 Includes: • Right Angle Drive (48-06-2871) • 9/16" Open End Wrench (49-96-4060) • 3/16" Socket Wrench (49-96-0080) • Chuck Remover Bar • Side Handle •
"- Metal shaft- Metal Gears and Metal Housing- Perfect for drilling between studs and joists during electrical house wiring- Perfect for drilling in tight places- Attaches to any 3/8'' or 1/2"" electric or air drill- Ball bearing shaft support- Lightweight, compact design- 3/8''-24 UNF spindle thread- 3/8'' serrated keyless chuck- Overall dimensions: 1-5/8'' W x 4-1/8'' H x 5-3/4'' L"
Drive screws and holes in tight spaces (view larger). Drive screws and holes into tight spaces with the DEWALT DWARA100 right angle adapter attachment, an ideal accessory for your DEWALT impact driver. Commonly used by HVAC and steel framers, the versatile DWARA100 can be used for bit tips, nutdrivers, impact hole saws, and spade bits. It allows for tighter access with your current impact driver, with increased gear strength, and fasteners are supported by a floating ring magnet for fastener retention and
DEWALT DWARA100 Right Angle Adapter Attachment - DWARA100
Bosch, 1618580000, Chucks / Adapters,NA, SDS-Plus, Drilling Accessories, Right-Angle Attachments SDS-Plus Shank Right Angle AttachmentBosch parts keep your tools working their best for any application you can come up with.Features:Shank Angle AttachmentBosch has been in the headlines of state of the art development for over 100 years. From the invention of the jigsaw to their ergonomic designed tools, Bosch as cared about the customer since they started business in 1886.
Ideal for drilling cable pathways between studs and joists Lightweight, compact design Overall dimensions: 1-5/8'' W x 4-1/8'' H x 5-3/4'' L Weight: 1.20 lbs.
econoestore Store 90 DEGREE RIGHT ANGLE DRILL ADAPTOR WITH METAL GEAR 3/8" CHUCK NEW 90 DEGREE RIGHT ANGLE DRILL ADAPTOR WITH METAL GEAR 3/8" CHUCK E FREE SHIPPING LOWER 48 states This auction is a brand new Ready to ship THIS ITEM IS BRAND NEW INSTOCK READY TO SHIP. RIGHT-ANGLED DRILL ADAPTER For all 3/8" and l
575 Features and Benefits Features: -Shaft lock on the attachment allows for easy accessory changes.-Ball bearings and spiral bevel gears provide smooth and cool operation.-Coupling system allows you to orient the attachment on your tool in 12 different directions.-Quick connect system easily attaches to your rotary tool in place of the housing cap, no wrenches required.-Compact, durable design for those ''hard-to reach'' places.-Fits Dremel models 275, 285, 395 and 398.-Right Angle Attachment . -Includes
Dewalt DWARA100. Features: Provides better accessibility to drive screws and drill holes in tight spaces. Durable construction lasts up to 5x longer than the competition. Sure Set System floating magnet secures fasteners for greater holding power and bit retention. Ergonomic ABS handle does not get hot while in use.
MARINCORight-Angle Cord Set Adapters MARINCO Right -Angle Cord Set Adapters When space is tight, convert yourexisting shore power cordset from astraight connection to a right angleconnection. GripLock handle designfor easy hook-up and correctblade alignment, even in the dark.Includes sealing collar to lock outmoisture between adapter and cordset.30A cordset for 125V, 50A cordset 125V or 250V. Customer Reviews Description 30A Right-Angle Cord Set Adapter, 125V 9329848 1RPC
Dewalt Right-Angle DWARA 00 Adapter Attachment features fasteners supported by floating magnets and an ergonomic ABS handle that does not get hot when in use..Product Type: Adapter Attachment.Power Source: Corded -electric .Voltage : 20 V.Material: Plastic & Metal.Color: Yellow.Weight: 0.48 lbs..Warranty: Year.Dewalt right-Angle DWArA 00 Adapter Attachment - Drive holes and drill screws easily in compact spaces
Right Angle Adaptor W/ 3/8"X24 Double Hex Stud
Work easily with your impact driver in tight spaces using this Impact Ready Right Angle Attachment (DWARA100) from DEWALT®. Ideal for HVAC and steel framing applications, it has an ergonomic ABS handle for ease of use.
D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling. Powerful 7 amp motors and three speed ranges make this a versatile tool that will handle a wide range of applications. The 3002-1 features a 0 to 600 rpm motor; this gives the two speed head 0 to 400 rpm on low and 0 to 900 rpm on high. These powerful units come in an impact resistant carrying case and include a side handle for ease of operation.Milwaukee 3002-1 Right Angle Drill Kit Features: 1/2"
Model#: MILN2415 -21 Milwaukee 2415-21 M12 12V Cordless Lithium-Ion 3/8 in. Right Angle Drill Driver Kit Model#: MILN2415 -21 Reviews Details With a head size of only 3.75-in, the M12 Cordless 3/8-in Right Angle Drill Driver delivers 100 in-lbs. of torque in a compact light weight design. The first sub-compact right angle drill driver with a spindle lock chuck, the 2415-21 is the most versatile right angle drill/driver in the industry. Built in electronics include an electronic clutch, fuel gauge, speed
TE Connectivity 1055065-1 SMA ADAPTER; PLUG-JACK; RIGHT ANGLE
90 Degree Right Angle 3/8" Keyless Chuck Drill Adapter Steel Body Design Ball bearing shaft support Serrated chuck for maximum drill bit holding Easy Grip body for increased drill chuck closure torque. By using specialized anti-thrust bearing to convert hand-applied torque into superior gripping force.Chuck has Comfortable Plastic Outer body Drill attachment shaft is steel Internal Gears are Steel Drill attachment internal drive shaft is Steel Steel Body and Steel Shaft Keyless Design Attaches
DEWALT Right Angle Drill Adapter ( NEW IN BULK PACKAGE )PRODUCT OVERVIEW Increase the productivity and versatility of your existing drill with the DEWALT DWARA50 Right Angle Drill Adapter. Just tighten this adapter in your chuck and you instantly have access to tight and hard to reach spaces. For use with both corded and cordless drills.Tighter access with your current drill/driver 2X longer life than the competition Accepts any 1/4 in. hex shank accessory For use with most drill SPECIFICATIONS
Factory Reconditioned Ridgid ZRR8223402 3-8 in. JobMax Right Angle Drill Driver Head
Allows 5-1/2" for right angle drill head and chuck. Provides two additional drilling speeds. Chuck transferred from drill to low spindle of right angle unit reduces drills normal speed by 1/3 and increases drilling torque by 50%. Chuck transferred to opposite spindle of right angle unit increases speed by 50%.
Milwaukee 3102-6 1/2" D-Handle Right Angle Drill Kit Milwaukee 3102-6 1/2" D-Handle Right Angle Drill Kit Item No: MW3102-6 Retail Price: $485.92 Our Price : $260 .50 Product Description 3102-6 Milwaukee 1/2" D-Handle Right Angle Drill Kit D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling. Powerful 7 amp motors and three speed ranges make this a versatile tool that will handle a wide range of applications. The 3102-6 features a 500 rpm motor; this