-
Steck Bulldog Curved Clamp
Curved clamp allows you to save the panel and saves time up to an hour per repair! Grabs the curved pinchweld where no other clamp will attach. U.S.A. Use for pulling SUV and van hatc...
$79.99Find more:
-
Mo-Clamp (MO 2450) Boltless Strut Tower Puller # 2450
Also known as: MCL-2450, MO 2450, MO2450, MOC2450; Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
$145.99 -
MoClamp 3560 GM REAR BRACKET MO-CLAMP AUTOBODY CLAMPS & ACC
MOC 3560 SIZE: EACH GM REAR BRACKET MoClamp Pulling Clamps MO-CLAMP AUTOBODY CLAMPS & ACC
$77.35 -
STECK 20020 "The Bulldog" Curved Clamp
Saves time! Up to an hour per repair. Save the panel. Grabs the curved pinchweld where no other clamp will attach. Pulls the pinchweld to accurately seal the weatherstrip to the hatch. Individually adjustable teeth to assure secre attachment to pinchweld. Elongated hole accepts any hook for fast setup and pulling.
-
BD-Power Intake Hose & Clamp Kit
BD-Power Intake Hose & Clamp Kit Intake Hoses and Clamps Are your intercooler boots & hoses blowing off? This is a common problem with the Diesel especially for those who love high boost pressure. Stock intercooler boots & hoses have been blowing off at as little as 25 PSI which can ruin your day if you are racing at the track or pulling that steep grade. Now available from BD, Silicone Nomex intercooler boots & hoses that can hold up to 75 PSI and high torque t-bar clamps for a tight fit. Manufactured by
$223.25 -
Clamps and Covers
(5 stars) reviewed on 03/20/09 by chutch2002 from Citrus Heights, CA for a yamaha 2002 Road Star 1600/1700 Silverado wrote: very good filter and easy to clean (4 stars) reviewed on 10/03/09 by Baz from Adelaide, South Australia, for a 2004 Mocha Road Star 1600/1700 wrote: Great look and finish (4 stars) reviewed on 06/15/09 by NastyHabits from Gagetown, NB for a 2002 Road Star 1600/1700 wrote: You can sure it pulling in air. Roll on the throttle and hear it Good part to install didn't take that long »
$209.99RideGear -
MityVac Clamp-On Auto-Refill Kit MITMVA6832
MityVac Clamp-On Auto-Refill Kit MITMVA6832 0246-mit-mva6832 $52.22 $41.77 MityVac Clamp-On Auto-Refill Kit MITMVA6832 Vacuum bleed your entire brake system without returning to refill your master cylinder! Beginning July 2005, Mityvac will offer a great new accessory for our hand pump and compressed air vacuum brake bleeders. The new MVA6832 Clamp-on Auto-refill Kit mounts on top of your carâ?™s master cylinder and automatically maintains the proper level of new brake fluid as you vacuum bleed the system.
$41.77Brandsplace.comFind more:
-
Schley 83350 VW Crank Pulley Pulling Aid
Schley 83350 VW Crank Pulley Pulling Aid Part Number: SCH83350 Description This unique tool was designed to aid in the removal of the crankshaft pulley on all air-cooled Volkswagen Type I or 1972 & earlier Type II engines. Its versatility allows it to fit all pulleys, from the large 7 inch 36HP and early 40HP models, to the small 5 3/4 inch aftermarket power pulleys. In operation, this tool clamps around the pulley and exerts an even amount of pulling pressure on the pulley to aid in its removal. Its
$19.54 -
Coats Clamps - Upgrade Kit (Includes (8)184052) Fits Models 5050 /5060 /5065 /6060 /6065 (85009943)
Features Coats Clamps - Upgrade Kit (Includes (8)184052) Fits Models 5050 /5060 /5065 /6060 /6065 (85009943) Free Shipping Supersede 8184177 Allows Older Tire Changers to More Easily Handle Low Profile, Run Flat Tires. The new Coats Robo-Arm™ upgrade kit makes han- dling tough tires fast and easy for many older model Rim Clamp“ tire changers. The Coats Robo-Arm upgrade kit fits Coats 5000 and 6000 Series tire changers (except models 5030 and 5070), providing extra power and leverage for chan- ging run flat
$1,972 -
MO-CLAMP 3MA STRUT PULLER-4800
MO-CLAMP 3MA STRUT PULLER-4800 Item ID: PBE CPE 4816 EDP: 8695 Weight: 11.00 lbs. Price: $ 199.00 *Shipping estimate: $ 9.99 Quantity: • New plate design permits faster hookup, pulling in any direction • Design permits center point over strut tower measurements with tram gauge instruments • Design gives additional height and clearance for pulling over & around obstructions such as fenders • Made of Mo-Clamp's "heat-treated steel" • Larger base of new leg gives more support for pulling • Comes with 3 #4 WL
$199.00 -
MO-CLAMP T-TOP ANCHOR POT (1 ONLY) TIE DOWN-3051
MO-CLAMP T-TOP ANCHOR POT (1 ONLY) TIE DOWN-3051 Item ID: PBE 9MS PU3051 EDP: 49803 Price: $ 44.99 Mo-Clamp #3051 T-Top Anchor Pot An anchoring system for versatile pulling Insert 3/8" frame straightening chain, anchor with lock cap, and pull from any direction or angle Lock cap keeps out dirt and dust when not in use Includes sleeve and lock cap 31/23" (89 mm) cored hole required #3060 Cast-in Model is available for new floors Replacement Parts: #300210 Welded Cap #3001 Weight: 5 lbs (2.27 kg); Capacity:
$44.99Find more:
-
MO-CLAMP T-TOP II-3081
MO-CLAMP T-TOP II-3081 Item ID: PBE 9MS PU3081 EDP: 49806 Price: $ 42.99 Mo-Clamp #3081 T-Top II Anchor Pot Installs using only the #3082 Installation Tool and a torque wrench Provides a full 10 tons of pulling capacity using 3/8" chain Lies flush with floor when not in use 31/2" (89 mm) cored hole required Weight: 5 lbs (2.27 kg) Capacity: 10 tons (9,072 kg) Replacement Parts: #308110 Casting Cap, #3082 Installation Tool Item ID: PBE 9MS PU3081 Price: $ 42.99
$42.99 -
Mo-Clamp 2450 Boltless Strut Tower Pulley
Boltless Strut Tower Pulley Toolsource #64549 Manufacturers Part Number #2450 $139.95 Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary. Overall length: 5" (127 mm). Weight: 8 lbs. (3.63 kg). Capacity: 3 tons (2,722 kg). Mo-Clamp 2450 Boltless Strut Tower Pulley Product Reviews Parse Time: 0.499s 0.500 s
$144.14Find more:
-
MO-CLAMP BOLTLESS STRUT TOWER-2450
MO-CLAMP BOLTLESS STRUT TOWER-2450 Item ID: PBE CPE 5544 EDP: 9314 Price: $ 179.00 Mo-Clamp #2450 Boltless Strut Tower Listed below are some automobiles with boltless strut towers: • Audi 400 • Saab • Merkur • Dodge Colt • VW Golf • VW Jetta • Isuzu Impulse • VW Quantum • VW GTI • Mitsubishi Easy, fast, reliable method for pulling strut towers Developed for strut towers without bolts, to correct chassis dimensions to factory specifications Strut tower removal is necessary. Overall Length: 5" (127 mm)
$179.00Find more:
-
MO-CLAMP DOWN PULLEY BRACKET #5810
MO-CLAMP DOWN PULLEY BRACKET #5810 Item ID: PBE CPE 4867 EDP: 8788 Weight: 18.00 lbs. Price: $ 129.00 *Shipping estimate: $ 13.49 Quantity: Mo-Clamp #5810 Down Pulley Bracket Use with floor pots or bench rack systems Chain stop extra (#4870) For straight down or angled pulling Works with pulling towers and bench systems Large 5 inch wheel prevents undue chain wear Secured with 1 inch heat-treated pin When used with the #5811 Block Pulley Adapter it offers horizontal pulls. Overall Length: 71/2" (190mm)
$129.00 -
SLIM-LINE A-PILLAR PULLER BY MO-CLAMP-1320
SLIM-LINE A-PILLAR PULLER BY MO-CLAMP-1320 Item ID: PBE CPE 7681 EDP: 32175 Weight: 9.00 lbs. Price: $ 139.00 *Shipping estimate: $ 8.99 Quantity: Mo-Clamp #1320 Slim Line Sill Hook Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff© drop-forged, heat-treated alloy steel Pulling capacity:4 tons Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip
$139.00 -
Bulldog Tailgate Pinch Weld Clamp
Steck 20020 Bulldog Tailgate Pinch Weld Clamp BULLDOG Saves time! Up to an hour per repair.. Save the panel. Grabs the curved pinchweld where no other clamp will attach. Pulls the pinchweld to accurately seal the weatherstrip to the hatch. Individually adjustable teeth to assure secre attachment to pinchweld. Elongated hole accepts any hook for fast setup and pulling. SKU: STK-20020 MFG: Steck Our Price: $66.97 Retail Price: $82.00 You Save: $15.03 (18%) Item in stock!
$66.97 -
Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler
Discount Jeep Parts - Lowest Prices, Best Quality - Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler Rugged Ridge Lights Out Dome Light Shut-off Clamp for 1997-2004 Jeep TJ Wrangler When your doors come off, We'll punch your "Lights Out" This is one of those things that makes you wonder, "Why didn't I think of that?" This ingenious gadget was created to solve a problem any Jeep TJ Wrangler owner encounters when he takes off his doors:
$12.95discountjeeppartsFind more:
-
Liner Locks Cargo Clamps
Liner Locks Cargo Clamps Liner Locks keep cargo items securely tied down in your truck bed using an innovative cam and lever bar system. Fit most plastic bed liners with a simple quarter turn Clamp tight on the liner ridge, allowing you to secure your cargo with rope Up to 360 lbs. of direct and vertical pull Use for odd-shaped and heavy cargo, such as generators, air compressors, furniture, toolboxes, and more 16 gauge steel construction for long lasting and durable use Set of 4 Liner Locks ITEM 65224-1VGA
$9.87Find more:
-
Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler
Tellico4x4.com - Pay Less, Get More - Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler Lights Out Dome Light Shut-off Clamp for Jeep TJ Wrangler Rugged Ridge Lights Out Dome Light Shut-off Clamp for 1997-2004 Jeep TJ Wrangler When your doors come off, We'll punch your "Lights Out" This is one of those things that makes you wonder, "Why didn't I think of that?" This ingenious gadget was created to solve a problem any Jeep TJ Wrangler owner encounters when he takes off his doors: Turning the dome
$12.95Tellico 4x4
sponsored links
-
Toyota Kyushu Pulling Clamps
Quality Kyushu Pulling Clamps. Low Cost. Fast Shipping. Order Online.
www.AutoBodyToolmart.com -
Pulling Clamp
Buy pulling clamp now! Fuel your passion on eBay Motors.
www.eBayMotors.com -
Body Shop Pulling Clamps
Star-A-Liner collision repair accessories used with Cheetah frame machines. Pulling tools, clamps, chains.
www.staraliner.com -
Industrial Pull Clamps
Manual Pull Clamps & accessories for Workholding and Fixturing.
www.fixtureworks.net
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
