Camco’s 1/2" Temperature and Pressure Valve with 4" Probe will help protect your RV water heater from excessive temperature and water pressure. It's factory set at 150 PSI and crafted with no gaskets and an epoxy-coated probe to prevent corrosion buildup.
This Apollo Valve 10-600 series hot water relief valve protects against excessive water pressure due to failure of controls to regulate BTU input. It has a bronze body, a 60 pounds per square inch (psi) relief pressure, and a 1" female National Pipe Thread (NPT) inlet connection and 1-1/4" female NPT outlet. The valve's body and spring cage are bronze for resistance to corrosion. The seat is silicone for resistance to high temperatures and is elevated for draining water away from the seat area. The spring
The Cash Acme Pressure only relief valve provides protection against thermal expansion protection, static pressure and over-pressure relief. Perfect for use with very low capacity pump relief and other uses of similar nature where tight shut-off is required. Ideal for domestic water heating/boiler applications.
LF100XL 3/4" Lead Free Temperature and Pressure Relief Valve The combined 2 in 1 temperature and pressure relief valve provides the least expensive and proven means for protection against both excessive temperature and pressure emergency conditions. Provides fully automatic temperature and pressure relief protection for hot water storage tanks and heaters up to 105,000 BTU/HR. Series LF100XL furnished with test lever and extension thermostat for installation in the hot water outlet line or directly in the
Watts, 0372271, Specialty Valves, 530C, Valves, Pressure Relief Valve, 530C 3/4 Calibrated Pressure Relief Valve Series 530C calibrated pressure relief valves are spring operated brass valves designed for use only as protection from the build up of excessive pressure in systems containing water, oil or air. Series 530C valves incorporate a calibrated adjustment feature for setting the valve to the relief pressure required. These valves are ideally suited for bypass thermal expansion relief. Watts 0372271
Watts pressure /temperature relief valve [ water ] [ 3/4" npt ] [ 125 psi ] [ 210 f ][ width 2-3/4" ] [ 5" probe ] [ 200,000 btu ][ brand watts ] [ mfg# 40xl5 - 125210 ]
Pressure Relief Valve 100 psi Lead-Free 3/4 MIPT PRV07-100NL. Pressure Relief Valve 100 psi Lead Free 3/4 MIPT Features: Pressure Relief Valve 100 psi Lead Free 3/4 MIPT Features: ThisLead Free 100 psi Pressure Relief Valve is made of heavy duty lead...
This Hayward RV2075T pressure relief valve has a CPVC body, an adjustable relief pressure, 3/4" female NPT threaded connections, a FPM (fluorocarbon) seal, and a stainless steel spring. The valve's CPVC (chlorinated polyvinyl chloride) body, CPVC valve seat, and stainless steel spring resist corrosion and chemicals, are assembled with silicone free lubricant, and have an operating temperature range of from 40 to +190 degrees F. This relief valve can be adjusted to open between 5 and 75 pounds per square
ASME Section IV Low-Pressure ValvesPressure range: 5 to 15 psi; preset to 15 psiTemp. range: 250 DegreeF max.Pressure ReliefBronze construction.MNPT x FNPT connections.Meet ASME Section IV, CSA, CRN standardsApollo 1420508, 1CKY0, Apollo 1420608, Apollo 1420708High -capacity valves are for medium- and large-size commercial and industrial heating boilers.3/8" NPT side tapping for drain connection.Low Pressure Relief Valve, Inlet/Outlet 2 1/2 In, MNPT x FNPT Connection, Material of Construction Bronze, Preset
"174A-125 3/4"" Boiler Pressure Relief ValveBronze body safety relief valves for pressure protection only of all types of hot water heating boiler equipment. Pressure range 30 to 150psi (2 - 10 bar) with corresponding high ratings from 650,000 to 14,370,000 BTU/hr. Female inlet and outlet connections.Watts 0274751 Features:Seat located above drain; water canÂt be trapped and sediment canÂt foul seatNon-mechanical seat-to-disc alignment will not stick or freezeWater seal of high temperature resisting
Temperature Pressure Relief Valve, Inlet Type FNPT, Outlet Type FNPT, Inlet Size 1 In., Outlet Size 1 In., Thermostat Length 9 In., Body Height 65/8 In., 4,059,000 BtuH, Factory Set Pressure 150 psi, Max. Temp. 210 Degrees F, Auto ReSeating No, Body Material Lead Free Copper Silicon Alloy, Body Width 33/8 In., Standards ASME, ANSI Z21.22, CSA, MILV13612D
Pressure Relief Valve, Inlet/Outlet 1 1/2 In, FNPT Connection, Material of Construction PVC, Set Pressure Range 5 To 75, Disc Material PVC, Spring Material Coated S/S, Seat Material EPDM, Temp Range 40-140 F, Height 13.25 In, Length 4.32 In HaywardSet by hand; no tools needed. Molded gauge port for pressure gauge.Temp. range: 40 to 150 F (PVC); 40 to 215 F (CPVC)PVC and CPVC Pressure-Relief ValvesFNPT connections
The Cash Acme FVX Series combination Temperature and Pressure relief valves are designed to offer high capacity protection for domestic and commercial hot water heating devices. The FVX series is fully automatic and the valve will re-seat itself after either temperature or pressure relief. These valves are well suited for restaurants, hospitals, and laundry-mats.
The Pressure Relief Valve features 8MPa pressure parameter, -5 - 120°C suitable temperature, suitable for air medium. The safety valve is a indispensable safety equipment for air compressor. This Pressure Relief Valve is a safeguard to protect the compressor from back pressure. <br>
For gas water heaters 3/4" threaded connection 5/8" shank Rated for 150 P.S.T. Pressure and 210 degree F Fits all residential models ASME certified
Boiler Pressure Relief Valve, Inlet Type FNPT, Outlet Type FNPT, Inlet Size 2 In., Outlet Size 2 In., Body Height 115/8 In., 1,437,000 BtuH, Factory Set Pressure 150 psi, Max. Temp. 250 Degrees F, Auto ReSeating No, Body Material Lead Free Copper Silicon Alloy, Spring Material Stainless Steel, Body Width 61/4 In., Standards ASME, MILV18634B
The Cash Acme pressure only relief valve is for use on hot water space heating boilers, water supply heaters, and storage tanks. The product is an economical option to protect your system from over-pressure situations.
"L100XL 3/4"" Extended Shank Temperature and Pressure Relief ValveCSA Rated. Standard models are self-closing temperature and pressure relief valves for water heaters up to 105,000 BTU/Hr.Watts Series L100XL have extended inlet shanks for use with the new generation of water heaters containing extra thick insulation. These valves eliminate the use of an extension nipple required with standard shank length models.The combined 2-in-1 temperature and pressure relief valve provides the least expensive and
Intended for protection of hot water heaters and storage tanks Incorporates an inert thermal element coating that provides effective isolation from mineral deposits, liming, and galvanic corrosion Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring Test lever standard Factory-set relief settings 210F temperature relief setting 5 element extensions 125 PSI 3/4 Carded
Takagi Low Lead Compliant Isolation Valves & Pressure Relief ValveIsolation valves are used to isolate a unit for service. The Pressure Relief Valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi.
Temperature Pressure Relief Valve, Inlet Type MNPT, Outlet Type FNPT, Inlet Size 11/4 In., Outlet Size 11/4 In., Thermostat Length 5 In., Body Height 65/8 In., 4,059,000 BtuH, Factory Set Pressure 150 psi, Max. Temp. 210 Degrees F, Auto ReSeating No, Body Material Lead Free Copper Silicon Alloy, Body Width 33/8 In., Standards ASME, ANSI Z21.22, CSA, MILV13612D
Back Pressure Valve, FR Series, Inlet/Outlet 1 1/2 In, FNPT Connection, Material of Construction Cast Iron, Preset Setting 33 PSI, Pressure Range 10 To 55, Disc Material Stainless Steel, Spring Material Stainless Steel, Seat Material Monel, Temp Range 40 To 450 F, Height 10 3/4 In, Length 7 1/2 In, Standards CSA, CRN Backpressure Valves Series FRFully automatic valves maintain preset inlet pressure, regardless of variations. All have a stainless steel spring. Ranges are factory-set at midrange and can be
Watts Regulator Temperature and Pressure Relief Valve 40XL-4, 1 (0163725) Series 40L, 40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test
The Northman Modular Dual-Port Relief Valve features a dual cross-port relief function that eliminates harmful pressure spikes to provide precise, independent over-pressurization for both working ports on any D03 directional valve. Adjustable Pressure PSI 500-2,000, Flow GPM 9.3, Max. PSI 2,000. Modular design Easy installation with no piping, reducing leakage points 500 - 2,000 adjustable PSI 9.3 GPM flow rate. Model Number: MRF02DK220
1/2MIP Inlet x 1/2FIP Outlet 75 PSI For tankless heaters or water heaters equipped with energy cutoff
Use this All Points 56-1081 pressure temperature relief valve to replace the one on your dishwasher. Made of cast iron, this 3/4" NPT relief valve has a 5" probe and is triggered by 150 PSI or water up to 210 degrees Fahrenheit.
"LFL100XL 3/4"" Lead Free Extended Shank Temperature and Pressure Relief ValveWatts Series LFL100XL has extended inlet shanks for use with the new generation of water heaters containing extra thick insulation. These valves eliminate the use of an extension nipple required with standard shank length models. They feature lead free construction to comply with lead free installation requirements.The combined 2-in-1 temperature and pressure relief valve provides the least expensive and proven means for
"Product Features:3/4"" sweat isolator - EXP E3Hot and cold set - tankless water heater service ball valvesAdjustable packing gland - hi-flow hose drains (500 WOG)Pressure relief valve - 150 PSI / 2.7M BTULow lead compliant - meeting federal and state regulations for lead content"
10493 Features: -Valve.-All brass body and stainless steel spring.-Pressure setting of 150 PSI.-Furnished with test lever.-Epoxy coated extension probe.-Extended shank, carded.-ANS Z21.22 design.-AGA certified.-0.75" Inlet -outlet .Dimensions : -Probe length: 2.5".-11.38" H x 3.63" W x 0.67" D.-Overall Product Weight: 0.68.
Cash Acme 23576-0150LF 3/4 Bronze Temperature and Pressure Relief Valve Features: Provides effective isolation from mineral deposits and galvanic corrosion Completely automatic and reseats after temperature or pressure relief Listed by CSA and ASME Every valve is tested for performance prior to shipping Factory set at 150 psi Maximum temperature of 210 degree F Shank length of 1.1877 Male inlet and female outlet 4 element The Lead Free NCLX-5 incorporates an inert thermal element coating that provides