Mild steel copper-coated oxy-acetylene gas welding rods are made of high-quality carbon steel of uniform and tightly controlled analysis.Rods have a melting point of 2750�� F and produce quality welds of up to 65,000 PSI tensile strengthIdeal general purpose rod for welding all low-carbon steels
Product Information MIG Wire - Carbon Steel Small Package **.045" ER70S-6 Radnor® 70S-6 Mild Steel MIG Wire 11# Plastic Spool Radnor® 70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, excellent wetting, and a highly fluid weld puddle. It also produces the highest deposit strength of all the carbon steel MIG wires. RAD64001220 Features: Excellent spatter control and bead profile Fluid puddle, good
$25.16
Kett EHN - AN5000 Portable Electric Nibbler 3/16 in. mild steel; 10 ga. Stainless
Nibblers EHNAN5000 Metal Fabrication Kett EHN - AN5000 Portable Electric Nibbler 3/16 in. mild steel; 10 ga. Stainless Part # EHNAN5000 Usually ships within 1 - 2 weeks Features: • 3/16 in. mild steel; 10 ga. Stainless • 120 volt • length: 12 5/8 in. • weight: 21 lbs Get beefed-up performance and portability to cut up to 3/16 mild steel. Compact 21 pound frame and 2 HP motor, go wherever you need to be. Available in electric and pneumatic AEHN models Shipping
Innovate Motorsports 3764 Extended 1 inch Exhaust Bung and Plug Kit (Mild Steel)
Innovate Motorsports Mild-Steel 1 inch extended Bung and Plug kit (18mm x 1.25) is used for placement of a O2 sensor in the vehicles exhaust system. The bung is welded into the exhuast and the O2 sensor (Narrowband or Wideband) screws into the bung allowing the sensor tip to be exposed to the exhaust gas in the pipe. Extened bung for use with high horsepower engines, and engines running leaded fuel and 2-stroke. This will allow the sensor to sit flush with the exhaust pipe to avoid sensor damaging
$12.00
Sealey Mild Steel MIG Wire 0.7kg 0.6mm A18 Grade
Sealey Mild Steel MIG Wire 0.7kg 0.6mm A18 Grade List Price ÂŁ6.84 - You Save ÂŁ2.89 Our Price ÂŁ3.44 exc VAT MIG/7K06 SEAMIG/7K06 Sealey Mild Steel MIG Wire 0.7kg 0.6mm A18 Grade 0.7kg x 0.6mm reel of top quality wound mild steel welding wire manufactured to BSEN 440 Part 1. Model No: MIG /7K06 Weight: 0.7kg Diameter: 0.6mm Customer Reviews 196Kb
£3.95
Sale
Delavan Mild Steel Coupler, Model# 50101
Durable mild steel quick coupler with set screws for 5/8in. dia. electric motor or gas engine. 2600 max. RPM. U.S.A.
$25.99
Forney Mild Steel Mig Wire
E-70, S-6 mild steel mig wire Ideal for automobile body repair Works well over rust and scale, high strength and better deoxidation, low spatter
Now, the AX900 axle scale series combines field proven technology, the most sought after features and widest range of sizes and capacities into one complete line of above and in-ground axle scale systems to stay ahead of these ever growing requirements.
Mild Steel Premium Quality General Purpose All Position Electrode E6013 AWS A5.1 160 5/64 5 lbs / pkg
Electrodes Mild Steel Mild Steel Premium Quality General Purpose All Position Electrode E6013 160 5/64 5 lbs / pkg Mild Steel Premium Quality General Purpose All Position Electrode E6013 AWS A5.1 160 5/64 5 lbs / pkg DC Straight, Reverse or AC Tensile: Up to 83,000 Versatile all around repair and fabrication of clean, well fitting common mild steel components. Fast freeze slag characteristics ensure fully positional operability. Related Products
Lincoln Electric .035 Flux-cored Nr211 Mild Steel Welding Wire. 10 Lbs. S. S. Spool
A 10 Lbs spool of gasless flux-cored NR 211 mild steel welding wire for deep penetration. Can be used on MIG Wire Feed Welders. Produces low spatter and excellent weld appearance.
Clarke Mild Steel Welding Wire, .023 in. (.6MM) 2 LB. 4" Spool • Premium ER70S6 grade solid steel welding wire. • For use with Wire Feed MIG Welders capable of welding on DC Reverse polarity. • Shielding gas required. Clarke CLA6701 3.00
$8.22
Sale
Flange, Mild Steel T4 Undivided Inlet
Flange, Mild Steel T4 Undivided Inlet $23.00 CNC-machined, mild steel undivided T4 inlet flange. 1/2" thick for excellent warp-resistance, and featuring tapped mounting holes. Bolt pattern is 3.250" x 2.750", with a major inner diameter of 3.000".
Baker Mild Steel Round Rod 1/4" Diameter 18" Length
Baker Mild Steel Round Rod 1/4" Diameter 18" Length 425185 | Manufacturer #: 52418308-4 Perfect for use in a variety of gunsmithing projects.
$4.98
Sale
Kett MHN - AN5500 Electric Portable Nibbler 1/4 in. mild steel and 3/16 in. stainless
Metal Fabrication MHNAN5500 Kett MHN - AN5500 Electric Portable Nibbler 1/4 in. mild steel and 3/16 in. stainless Part # MHNAN5500 Usually ships within 1 - 2 weeks Features: • 1/4 in. mild steel; 3/16 in. stainless • 120 volt • length: 12 5/8 in. • weight: 24 lbs This versatile performer combines speed and power - cuts 1/4 mild steel up to 60 per minute. Ideal for manufacturing operations. Compact design makes it easily portable for field applications and finishing work on the fly Shipping
