-
Hobart Handler- 210 Wire Feed MIG Welder -
The Hobart Handler 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire fe...
$829.99 -
Lincoln Lincoln Electric Easy-Mig 140 Wire Feed Welder
Lincoln Electric Easy-MIG 140 Wire Feed WelderForgiving arc makes dialing in your application easy.Smooth arc starts with minimal spatter.Wide 30-140 amp welding output range.No Hassle Tool-less Design for wire spool mounting, wire drive service and...
$729.99 -
Vaper 90-Amplifier Wire Feed Welder #41181
Easy-to-use gasless flux-core wire welder for the beginner Perfect for light duty repairs, maintenance and fabrication Welds up to 1/8" thick mild steel - not suitable for aluminum Operates on 120V single phase power Amperage range: 60 - 90 amps Uses 0.030" to 0.035" diameter flux-core wire Thermal overload protector automatically shuts off welder when duty cycle is exceeded Fan cooled for better performance One year limited warranty Includes: Welding shield, welding hammer/brush, sample spool of flux-core
$200.15 -
FREE SHIPPING — Hobart Handler® 210 Wire Feed MIG Welder — Model# 500526
The Hobart Handler® 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire feed control enable fine tuning for the smoothest arc with less spatter. Volts: 230, Amps: 210, Duty Cycle: 30% at 150 Amps, 23V, Mig Ready: Yes, Wire Feed Speed Control: Yes, 40 - 700 IPM, Weldable Metals: Steel, stainless steel, flux corded and aluminum wires, Weld Thickness (in.): 24-gauge up to 3/8in.
$829.99 -
0.035" ER70S-4 Lincoln® Easy-Feed 4 Carbon Steel MIG Welding Wire 30# 12" Spool
Product Information MIG Wire - Carbon Steel 0.035" ER70S-4 Lincoln® Easy-Feed 4 Carbon Steel MIG Welding Wire 30# 12" Spool All position general-purpose solid MIG wire. Multi-pass for use with CO2 or Argon based shielding gas. Excellent for thin gauge and or dirty or rusty plate. LINEDA23346353 30 Pounds Features: Consistent weld deposit chemistry and procedures from package to package improve quality and save time. Fluid puddle, good wash-in at weld toes and flat weld beads minimize defects, scrap or
$4.98 -
Lincoln Electric K2473-1 Power MIG 180C 208-230/1/60 - Combination Wire Feeder / MIG and Flux-Cored Welder
Mig Welders K2473-1 Lincoln Electric K2473-1 Power MIG 180C 208-230/1/60 - Combination Wire Feeder / MIG and Flux-Cored Welder Part # K2473-1 Features: • Exclusive Diamond Core Technology delivers an outstanding arc you notice immediately compared to competitive models • Wide 30-180 amp welding output range is the highest output in its class – use .025” wire on the thinnest sheet metal up to .045” flux-cored wire for thick plate. • MIG weld 24 gauge up through 3/16” sheet metal in a single pass. •
$828.97Toolfetch -
Clarke - 180 Amp MIG/Wire Feed (CLAWE8000)
Clarke 180 Amp MIG/Wire Feed • Powerful 220V operation. • Weld steel, stainless steel, aluminum and cast iron. • Six voltage settings for accurate welding heat control. • Gas and flux core operation (Shielding gas bottle not included). Package Contents: • 180 Amp welder with Tweco style gun • Auto darkening helmet. • Welder cart. • Dual gauge regulator. • Wire brush/hammer. • .023 MIG wire/ .035 fluxcore wire. • Videotape instructions. • Extra contact tips. Clarke CLAWE8000 105.00
$706.61 -
Power MIG 180C Combination Wire Feeder/MIG and Flux-Cored Welder by Lincoln Electric
Whether you're a farmer or a fabricator, an autobody shop or a backyard mechanic, the Power MIG 180 will help you get the job done! It's a portable wire welder designed for use with industrial 230 volt input power, so you can weld on thicker material ďż˝ up to 3/16" with MIG welding and 1/2" with gas-less flux-cored welding. The Power MIG 180C Combination Wire Feeder/MIG and Flux-Cored Welder offers continuous voltage control for critical projects where precise adjustment is required. Lincoln Diamond Core
$1,180 -
Hobart Handler 125 Wire-Feed Welder with Optional MIG Gas Conversion Kit - 500487
Hobart Handler 125 Wire-Feed Welder with Optional MIG Gas Conversion Kit - 500487 SKU #: HBW1048 List Price: $440.00 You Save: $100.01 (23%) Sale Price: $339.99 (Varies with options) Shipping: Handler 125 Wire-Feed Welder by Hobart Welders Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035" flux cored wire. For greater versatility, upgrade the Handler 125 with the optional MIG conversion kit for welding with .023-.030"
$339.99Furniture Find -
Vaper? 90amp Wire Feed Welder Kit
Vaper? 90-amp wire feed welder. Easy-to-use gasless welder is great for beginners and perfect for light-duty repairs and maintenance in home, workshop or garage. Welds up to 1/8" thick mild steel using .030" -to .035" -diameter flux core wire. Fan-cooled with thermal overload auto shutoff. Comes with welding shield, hammer/brush, wire, cold contactor MIG torch, earth clamp and welding cable. Limited warranty
$199.99 -
0.035" ER70S-6 Lincoln® Murematic S6 Carbon Steel MIG Welding Wire 1,000# Speed-Feed® Reel
Product Information MIG Wire - Carbon Steel 0.035" ER70S-6 Lincoln® Murematic S6 Carbon Steel MIG Welding Wire 1,000# Speed-Feed® Reel ER70S 6 All position general-purpose solid MIG wire. Multi-pass for use with CO2 or Argon based shielding gas. Excellent for thin gauge and or dirty or rusty plate. Excellent wetting characteristics producing a slag-free weld requiring minimal cleanup. LINEDM23346613 1000 Pounds Features: Fluid puddle, good wash-in at weld toes and flat weld beads minimize defects, scrap or
$4.98 -
Handler 125 Wire-Feed Welder with Optional MIG Gas Conversion Kit
Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035" flux cored wire. For greater versatility, upgrade the Handler 125 with the optional MIG conversion kit for welding with .023-.030" solid wire and gas shielding. Handler 125 Features: -Includes: Comfortable 8' H-9B gun with liner for 0.023-.035" wire, 0.030" contact tips, 10" work cable with clamp, sample spool of 0.030" self-shielding flux cored wire, spool shaft to
$339.99 -
Campbell Hausfeld 115-Volt MIG Flux-Core Wire-Feed Welder
This is a reconditioned Farmhand (by Campbell Hausfeld) welder. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like-new condition. Some tools may contain cosmetic blemishes. For Campbell Hausfeld Model RBWG202000 welder, physical appearance WILL VARY depending on stock availability. Plug into any outlet! Weld using Flux or MIG (with shielding gas) setting. Campbell Hausfeld MIG/Flux welders enable you to create industrial strength welds within
$164.99hardwaresalesinc -
Lincoln Century 80gl Flux-cored Wire Feed Welder-
LINCOLN ELECTRIC CENTURY 80GL FLUX-CORED WIRE FEED WELDER-NEW!!! BRAND NEW IN SEALED BOX!! NEVER BEEN USED OR REFURBISHED!! FEATURES: Century 80GL Wire Feed Welder Century 80 GL welds 18 gauge sheet metal up to 1/8" steel. Great for general purpose metal repair and building projects. Mig and Flux-cored Wire Feed Welder Two separate heat settings and an infinite wire speed control. Uses .035 flux-cored welding wire on a 4" spool. No shielding gas needed. Plugs into a standard 120 volt AC househo
$230.00 -
Lincoln Lincoln Electric Easy-MIG 140 Wire Feed Welder K2697-1
Lincoln Electric Easy-MIG 140 Wire Feed WelderForgiving arc makes dialing in your application easy.Smooth arc starts with minimal spatter.Wide 30-140 amp welding output range.No Hassle Tool-less Design for wire spool mounting, wire drive service and polarity changes.Innovative contact tip, drive roll and nozzle storage keeps all your consumables close at hand.Power Chassis channels airflow to cool power systems, structurally secures key components and traps wires and cables to avoid unnecessary
$729.99 -
Clarke - 130 Amp MIG/Wirefeed (CLAWE6000)
Clarke 130 Amp MIG/Wirefeed • Operates from standard 120V circuit. • Weld steel, stainless steel, aluminum and cast iron. • Four power settings for accurate welding heat control. • Gas and flux core operation (Shielding gas bottle not included). Package Contents: • 130 Amp welder with Tweco style gun • Welder cart. • Flip-up welding helmet. • Dual gauge regulator. • Extra contact tips. • Videotape instructions. • .023 MIG wire/ .035 fluxcore wire. Clarke CLAWE6000 94.00
$537.50 -
SP-135T One-Pak Combination Wire Feeder/MIG And Flux-Cored Welder w... by Lincoln Electric
Looking for a versatile, value-packed welding partner for your home hobby shop or workshop? Lincoln's SP-135T is a great choice! This lightweight, compact 120V wire feeder/welder breezes through MIG welds on a wide range of materials including mild steel, stainless steel and aluminum. It also handles flux-cored welds on mild steel with ease. Practically everything you need to MIG weld mild steel is right in the box - just install a cylinder of shielding gas and you'll be welding like a pro in no time!
$772.07 -
Lincoln Electric K2471-1 Power MIG 140C 120/1/60 Combination Wire Feeder / MIG and Flux-Cored Welder
Lincoln Electric K2471-1 Power MIG 140C 120/1/60 Combination Wire Feeder / MIG and Flux-Cored Welder K2471-1 Lincoln® Diamond Core Technology™ and the rugged drive system aid arc performance for MIG welding on thin gauge steel, stainless and aluminum. Or, use gas-less flux-cored welding for deep penetration on thicker steel, even outdoors! Compare performance, features and price and you'll agree ... Power MIG®. The Professional’s ChoiceSM! Home projects and repair, sheet metal autobody work, farm and small
$689.99Toolsforless.com -
Clarke 130 Amp MIG/Wirefeed CLAWE6000
�� Operates from standard 120V circuit.�� Weld steel, stainless steel, aluminum and cast iron. �� Four power settings for accurate welding heat control.�� Gas and flux core operation (Shielding gas bottle not included).Package Contents:�� 130 Amp welder with Tweco style gun�� Welder cart.�� Flip-up welding helmet.�� Dual gauge regulator. �� Extra contact tips.�� Videotape instructions.�� .023 MIG wire/ .035 fluxcore wire.
$461.41Tool Explosion -
Wire Feed Mig Welder
500487 Wire Feed Mig Welder List Price: $608.40 You Save: $101.40 DrillSpot Price: $507.00 3 Business Day Shipping $40.49 MIG Welding Systems Handler Welders Use with or without shielding gas; perfect for light fabrication or farm and ranch applications. Features a built-in wire feeder with quick-release drive lever and a built-in contactor. Wire remains electrically cold while not welding. Dual-groove drive rolls make it easy to switch between 0.023 to 0.025" and 0.030 to 0.035" wire. Easy access to
$507.00
sponsored links
-
Mig Wire Welder
Directory of mig welders solutions. Find providers.
www.business.com -
Wire Feed Welders
Wire Feed Welders at Great Prices! Compare 50+ Wire Feed Welders.
Welder.OhDeal.com -
Wire Feed Welder
Find Wire Feed Welder Near You At Local.com - Official Site.
Welding.Local.com -
Wire Feed Welder
Brand Name Welding Supplies. Sale Prices. View Inventory Online.
www.airgas.com
