High performance aluminum oxide grain for long life and fast cutting. High grain concentration for aggressive cutting action and smoother running wheels. Proprietary material mix ensures durable long life wheels. 2 full sheets of fiberglass for durability and safety.
Dewalt, DW8702-50, Grinding Wheels, Material Removal Accessories, 2-1/2 Inch, 2-1/2 x .035 x 3/8 A36T fast cutting wheel Applications: Heavy duty fast cutting in all types of ferrous metal and stainless steel .035 and 1/16 wheels used for cutting 1/8 wheels used for grinding on the periphery of the wheel A36T for fast agressive cutting in tough applications A60T for clean smooth cutting and long wheel life Features: Heavy duty aluminum oxide grain for aggressive cutting action Proprietary Material Mix
Vermont American, 28032, Circular Saw Blades, Abrasives & Polishing, Cutting Accessories, 12 Inch, 12 Metal Cutoff Abrasive Wheel Blade Abrasive Wheels for Cutting Metal (Type 1A or ISO 41). Recommended for cutting all types of metal including steel, bronze, brass, copper, aluminum, iron and wire products. Wheel can be used to debur, clean, slot, nick and cut metal. Constructed of resinoid bonded aluminum oxide for increased durability. Metal-reinforced arbors provide additional strength. Tool type: High
Norton Metal Decking Type 01 high-speed reinforced cutoff wheels are suitable for use with high-speed saws. The thickness provides the durability and rigidity necessary on this tough application. Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used for grinding on the periphery, or outside boundary edge,
6 in. 46 Grit Metal Cut-off Wheel 3 PcSlice through ferrous metals and stainless steel with these metal cut-off wheelsMake fast, clean cuts in ferrous metals and stainless steel with these abrasive cut-off wheels! Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge. Designed for use with your angle grinder or high speed cutter, these cut-off wheels are fully reinforced with fiberglass mesh for added safety and controlled performance. Tough aluminum oxide
12" diameter 1/8" thickness 1" arbor Max RPM: 6400 Metal cutting High grain concentration for agressive cutting action 2 full sheets of fiberglass backing to withstand extreme applications and hold up to high speeds
Cut-off wheel- Cuts a variety of materials- Abrasive material for high performance metal cutting applications- Cuts ferrous and nonferrous materials- Do not apply excessive pressure- Metal- 3"- Carded- Length: 3-9- Width: 5-5 SKU: JNSN61505
4-1/2x.045x7/8 Metal Thin C
Abrasive CutOff Wheel, 1, Diameter 12 In., Thickness 0.125 In., Max. RPM 5100, Arbor Hole 7/8 In., Material Aluminum Oxide, Diamond Knockout No, Wheel Type Cutting, Grit 30, Wheel Specifications A30R, Application Ferrous Metal, Gray Iron, Stainless,...
Norton Metal Type 01 heavy-duty, high-speed, reinforced cutoff wheels are suitable for use with high-speed saws for metalworking, such as cutting pipe, cutting forgings, and metal plate dimensioning. Triple-reinforced cutoff wheels are longer-life than reinforced wheels and are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used
Take on tough cutting applications with these 4" x 5/8" x 5/64" Metal Cut-Off Wheels, 10 Pack (724107-5-10) from Makita. Ideal for cutting steel, cast iron, masonry, concrete, marble, slate and more.
Makita 724116-A-25 5 x 7/8 x 3/64-inch Cut-off Wheel Metal - 25 Pack
features and benefits: firepower double reinforced cut-off wheels are designed for heavy duty cut-offjobs using circular saws chop-saws and straight grinding machines they ensureoptimum effectivene...
"""Gemini 3"""" OD x 1/6"""" Type 1 Reinforced cut-off wheel with arbor size of 3/8"""" is made of alumina for durability. Wheel has rotating speed of 25465 RPM and is applicable for materials like non-ferrous soft metal, stainless steel or metals. Diameter: 3 in Thickness: 1/16 in Arbor size: 3/8 in Abrasive material: Alumina Speed: 25465 rpm max Free cut Good tier and contain no wax or rubber fillers Applicable materials: Non-ferrous soft metal, stainless steel, most metals Consistent performance at a
For traditional cut-off applications. Thin design for cleaning, slotting and cutting metal, metal studs, angle iron, tubing, autobody panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 27 center. .045 blade thickness.</li>
"""Gemini 4 1/2"""" OD x 0.045"""" Type 27 Depressed cut-off wheel with arbor size of 7/8"""" is made of alumina for durability. Wheel has rotating speed of 13580 RPM and is applicable for materials like metal, steel or stainless steel. Diameter: 4 1/2 in Thickness: 0.045 in Arbor size: 7/8 in Abrasive material: Alumina Speed: 13580 rpm max Right cut and contaminant free Good tier and contain no wax or rubber fillers Applicable materials: Metal, steel, stainless steel Consistent performance at a competitive
PFERD high-performance Type 1 cutoff wheels deliver longer life, quicker cutting, less dust and less vibration than conventional cutting wheels. Can cut both steel and stainless steel. Ideal for sheet metal, angle iron, tubing, metal studs, bolts and...
Dewalt, DW8065-25, Grinding Wheels, Material Removal Accessories, 7 Inch, SOLD ONLY IN QUANTITIES OF 25 OR MORE 7 x .055 x 7/8 Metal Thin Cut-off Wheel -Type 1 Flat Cutting Wheel Applications: For fast cutting and long life in all types of ferrous and stainless steel (INOX) metals Cuts steel, angle iron, pipe, tubing, rebar Features: 2 full sheets of fiberglass for durability and safety Proprietary material mix to ensure premium cutting speed Premium resin bonds are 100% inspected before use for product
4" Metal Cut-Off Wheel - Lot of 3 For use with most brands of cut-off tools Aluminum oxide grinding wheels for cutting sheet metal, sanding, leveling, and trimming Maximum speed: 13,700 rpm Arbor Size: 5/8" Thickness: 1/16" Please make sure your shipping address is correct. We will only follow your address listed in the Paypal payment for the shipment. Due to the secure reasons, we do not allow the address change through the email. Thank you for your business!
Features For traditional cut-off applications. Thin design for cleaning slotting and cutting metal metal studs angle iron tubing auto body panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. 0.040 blade thickness. Size - 4.50 in. Item weight - .09 lb. </ul>
Cutting Wheel; Brand Mibro Group; Type Metal Cut-Off Wheel; Diameter 7 in.; Arbor Size 7/8 in.; Edge Size 1/4 in.; Application Cutting Metal
Abrasive CutOff Wheel, 1, Diameter 14 In., Thickness 7/64 In., Max. RPM 4300, Arbor Hole 1 In., Material Ceramic Coated Aluminum Oxide, Diamond Knockout No, Wheel Type Double Reinforced, Grit 24, Wheel Specifications TA24T, A24R, Application Ferrous Metal
The Makita™ 724504-5 is a 12" x 7/64" x 1" cutoff wheel that has a A36P grit and is used for ferrous material in industrial applications.
DeWALT DW8061 4 X .045 X 5/8 Metal Thin Cut-Off Wheel - Type 1 (25 Pack) DEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally. DeWALT DW8061 4 X .045 X 5/8 Metal Thin Cut-Off Wheel - Type 1 (25 Pack) Features: 4 x .045 x 5/8 metal and stainless cutting Thin .045 wheel design for fast burr free cutting Proprietary aluminum oxide