-
12" X 30" Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Spindle Bore: 1-1/2" Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz) Swing over work table: 6-7/10" Thread pitch on processing: 9-48 1/n" Thread kinds on processing: 23. Tailstock Taper: MT3# X-Axis Working Travel:23-3/5" Y-Axis Working Travel: 6" Mill/Drill Specifications: Head Rotation: 360 degree ;Head Travel:7". Spindle Center to Support Column:12-1/8". Spindle to Table Distance (Min -Max ) :4 -3 /4 -11 -4 /5 " . Spindle Speeds: 4 (220 -2620RPM /50Hz )or (240 -2700RPM /60Hz ) Spindle Taper:
$2,490Find more:
-
12" X 30" Metal Lathe/mill Drill Combo, Gear Driven, 1 1/2 Hp Lathe Motor, 3/4 Hp Mill Motor, 110 or 220 Volt Set Up, Ships with Standard Accessories & Full 1 Year Warrantty! Excellent Value !
Distance between centers: 29-1/2", Swing over bed 12-3/5". Dial Calibration on Crossfeed: 0.002". Dial Calibration on Leadscrew: 0.002". Headstock Taper: MT5# Spindle Bore: 1-1/2" Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz) Swing over work table: 6-7/10" Thread pitch on processing: 9-48 1/n" Thread kinds on processing: 23. Tailstock Taper: MT3# X-Axis Working Travel:23-3/5" Y-Axis Working Travel: 6" Mill/Drill Specifications: Head Rotation: 360 degree ;Head Travel:7". Spindle Center to Support
$2,490 -
12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill
Geared Combo Lathe/Mill Drill 12" x 30" ,1 1/2" hp lathe motor & 3/4 hp mill motor ,110v or 220v,1 1/2" " spindle bore, 12 lathe speeds ,4 mill speeds, 5-48 TPI, 6 1/4" cross slide travel , low tolerance!
$2,490Find more:
-
PSI TCLPROVS Turncrafter Pro VS Variable Speed Wood Lathe
Variable speed wood lathe Powered by a 1/2-horsepower motor with variable speed control Electronic speed control box and cable easily mounts Made from cast iron Accessories include 6-inch tool rest, 3-inch face plate, spur center, dead center, and spare drive belt, Manufacturer: PSI Woodworking
Find more:
-
LatheGuard Safety Shields (Flexbar)
LatheGuard Safety Shields (Flexbar) LatheGuard Safety Shields (Flexbar) LatheGuard Safety Shields (Flexbar) Neither razor sharp chips nor broken tool bits will penetrate Flexbar's Latheguard™ shields of heavy-duty Lexan. These safety shields for lathes are rib reinforced, lightweight and of robust construction. The Latheguard swings away easily when needed. Made in USA. Part Number Motor Net Weight OAL Type Chuck Size Table Size Price For 6"-12" lathes Up to 8" dia. $135.00 For 12"-16" lathes Up to 12" dia.
Find more:
-
Motor, Mini Lathe
Motor, Mini Lathe Part Number: 1311 Weight: 4.94 lb Price: $144.95
$144.95LittleMachineShop.com -
Motor, Mini Lathe
Motor, Mini Lathe Part Number: 1311 Weight: 4.94 lb Price: $144.95
$144.95LittleMachineShop.com -
Motor Controller, Harbor Freight Mini Lathe
Motor Controller, Harbor Freight Mini Lathe Motor control PC board. This is the speed control for the 7x10 lathe with the Illuminated rocker on/off switch. It is designed for a 250 Watt motor. This controller works with a safety switch on the chuck guard. This controller does not have an interlock that forces you to turn the speed control to zero to start the motor. This motor controller is model FC250BJ/110V. It is rated at 110-120V 50-60Hz. Part Number: 3149 Weight: 0.70 pounds Price: $109.95 for several
$109.95LittleMachineShop.comFind more:
-
Motor Controller, Harbor Freight Mini Lathe
Motor Controller, Harbor Freight Mini Lathe Part Number: 3149 Weight: 0.70 lb Price: $109.95
$109.95LittleMachineShop.com -
Motor, Mini Lathe 7x14
Motor, Mini Lathe 7x14 Part Number: 2044 Weight: 5.00 lb Price: $179.95
$179.95LittleMachineShop.com -
Motor, Mini Lathe 7x14
Motor, Mini Lathe 7x14 Part Number: 2044 Weight: 5.00 lb Price: $179.95
$179.95LittleMachineShop.com -
12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill
12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill 12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill Bolton Product Details - Ratings and reviews for 12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill. Bolton RPM Hardware Product Features 12" x 30" geared combination mill/lathe two seperate motors 1 1/2 hp on lathe and 3/4 hp on mill Geared Combo Lathe/Mill Drill 12" x
$2,270Kitchen Sink .BizFind more:
-
Jet 14 in. x 42 in. Wood Lathe with Legs, VS PRO
Spindle features positive locking indexing in 10 deg. increments Built-in spindle locks let you remove or replace faceplates & chucks with ease Cam-lock mechanisms allow adjustments of headstock, tailstock & base without use of tools Powerful 1 hp TEC motor handles your toughest turning tasks Special cast-in webbings in legs accept 2 x 4s or a 2 x 12 for a solid tool or sandbag shelf
Find more:
-
13X40 18SP BENCH LATHE W/ IMP MOTOR/CABINET/DRO
13X40 18SP BENCH LATHE W/ IMP MOTOR/CABINET/DRO Machine Type: Bench Swing: 13 Distance Between Centers Length (Inch): 37 Horsepower: 1-1/2 Phase: 1 Crosslide Travel Length (Inch): 6-5/16 Thread Size (Decimal Inch): 4-112 TPI Thread Size (mm): 0.25mm - 4.5mm Longitudinal Feed Rates: 0.0011" - 0.0311" Model #SV510-2592 $4,598.95 ea $3,699.95 ea Product Description
-
14" x 40" Gear-Head Floor Lathe
G0554Z 14" x 40" Gear-Head Floor Lathe $4,995.00 b class =price> $4 ,695 .00 $355.00 This fully equipped, Heavy-Duty Floor Lathe will handle just about anything you can throw at it. Features like extra wide 10-1/4" bedway, coolant system with splash guard, foot brake and interlocked feed rod and leadscrew, not to mention all the standard accessories that come with this machine, will turn your shop into a real profit center. Check out all the features and specifications and then look at the price again and
$10,995GrizzlyFind more:
-
JET - JWL-1236, 12'' x 34-1/2'' Wd Lathe w/Stand, 3/4HP, 1Ph, 115/230V
Related Products JET - JWL-1236, 12'' x 34-1/2'' Wd Lathe w/Stand, 3/4HP, 1Ph, 115/230V Reviews 12" X 36" WOODWORKING LATHE Specially designed and built exclusively by JET® Heavy-duty cast iron lathe bed ensures stability and minimal operating vibration Heavy-duty cast iron headstock and tailstock provide rigidity, strength and years trouble-free operation Hollow tailstock allows long hole boring Pivoting headstock quickly turns 90 degrees and locks to facilitate outboard turning Specially designed bed
-
General International 25-200 M1 Wood Lathe "Maxi Lathe VS"
General International 25-200 M1 Wood Lathe "Maxi Lathe VS" #23000008 Product Description-General International 25200M1 The General International 25-200 M1 "Maxi Lathe VS" is a variable speed Wood Lathe. Featuring a durable cast-iron frame, three variable speed ranges and a quick release lever for quick belt positioning changes, this lathe is perfect for small shop usage. Features-General International 25200M1 Quick lock control levers easily position tool-rest Stable cast-iron frame, head & tailstock to
Find more:
-
Geared Head Bench Lathe - 13'' Swing 40'' Centers, 2Hp, 1 Ph, 230V
? One of JET's most popular lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quite operation. ? Fast, easy speed changes. ? Hardened and ground gears are featured in the headstock and gearbox. ? Dl-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. ? Headstock is constantly oiled during operation. ? Gear box gives wide inch threading and feed capabilities with no gear changes. ? V-way bed design is
$4,796 -
Kwik-way 108 On-Car Kwik-Lathe with Power Drive Syst - KWW108-0001-15
Features and Benefits Set-up in minutes - easy to use Ensures the rotor is always square to the caliper - produces an accurate machined surface that exceeds OEM specifications The Power Drive attaches quickly and easily for a constant s...,
Find more:
-
12" x 36" Gear Head Precision Bench Lathe
Details 12" x 36" Gear Head Precision Bench Lathe Description Standard features: 6-inch three-jaw chuck, 8-inch four-jaw chuck, 2MT live center, 2 and 3 MT dead centers, center sleeve, toolbox, steady and follow rests, thread change gears, 8-inch face plate, four-way turret and 1/2-inch drill chuck. Spindle: D1-4 Net Weight: 850 lbs. MT: 3MT Screw Dia: 7/8" (8 TPI) Spindle Speed(s): 70-1,400 rpm Spindle Taper: 5MT Saddle: 33" travel Tailstock: 4" spindle travel Swing: 12" over bed; 7" over cross slide
Find more:
sponsored links
-
Jewelers Lathe – up to 75% Less
Incredible prices. Find jewelers lathe & save up to 75%.
www.Best-Price.com -
Motor Lathe
Bid on Motor Lathe now! Find Radio Control Toys.
www.eBay.com -
Woodturning Lathes
Find a Deal at OhDeal.
Lathes.OhDeal.com -
Lathe Motors
Browse and compare great deals on Lathe Motors.
www.MonsterMarketplace.com
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
