Helpful tool uses a forcing-screw press to safely remove and replace u-joints brake anchor pins and ball joints on most cars and light trucks with press-fit type ball joints Removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints Remove and install ball joints without the need to remove the control arm from the vehicle Designed for use on most cars and light trucks that have press-fit type ball joints </ul>
648617 Features: -Allows changing the ball joint without removing the control arm.-Right tool for the job. Includes: -Kit 46 includes 23-piece for removal and installation of press-fit ball joints and U-joints.-Storage case includes usage photos and instructions. Dimensions: -Dimensions: 15.38'' H x 21'' W x 3.75'' D. Warranty: -Lifetime limited warranty.
CTA Tools 4007 Chrysler Ball Joint Socket-2-9/64-Inch is designed to remove and install the ball joints used on Chrysler/Dodge light trucks and vans. Intended for use with a 3/4-Inch drive. Heavy-duty construction allows for strength and durability. Whether tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.
• Low Profile Design With Heavy-Duty Forged Steel Body Suitable For Modern Vehicle Applications Where Restricted Access Is A Problem. • Includes Hardened Screw And Thrust Ball For Added Splitting Power.
Features and Benefits: Finally, a complete ball joint service kit for cars! Master Ball Joint Service Kit with 50+ adapters Includes all adapters for applications up to 2008+ Includes reference guide thru 2008 referencing press fit or bolt in ball joints Kit contents can be used for general removal and installation of many press fit components Also includes adapter application diagrams and charts, and quick reference charts.
Powerbuilt, 648749, Service Kits, Automotive Tools, Ball Joint Kit, Features: For removing and installing ball joints on many Chrysler vehicles Special four-sided sockets provide a positive fit on the unique special threaded upper ball joints Durable hardened sockets are 3/4-inch square drive to allow the use of the long breaker bar Specifications: Product Weight: 3.1 Pounds Height: 7.375 Length: 3.25 Width: 9.5 Powerbuilt is the premier tool and equipment brand marketed by Alltrade Tools for the American
US Pro Professional Universal Ball Joint Remover 20mm Jaw Capacity US Pro Tools are made to the highest American engineering standards, which mean that they are one of the best tool manufacturers on the market.This tool is made out of special steel for removing the Ball pivots on steering arms, steering tie rocks, steering knuckles etc.The high quality extra fine steel bolt with high torque help to split the joint easily.Slotted indents into the ball joint remover gives the user easy slide action and the
Brand New! 4 in 1 4 wheel drive ball joint remover/installer kit Perfect for 4WD ball joint service/repair 1 "C" frame press 1 "C" frame screw 3 Receiving tubes sizes: 2-3/4" x 3" 2-1/4" x 2-1/2" 1-3/4" x 2" Installer and remover adapters for 1967 thru cu
Pneumatic tie rod/ball joint separator kit. Works with hand and pneumatic air systems to remove tie rods, ball joint and pitman arm assemblies.
940581 Features: -Use on most vehicles.-Tool set for removing and installing pressed-in type ball joints.-Allows changing the ball joint without removing the control arm. Includes: -Kit 74 includes 14-piece are additional ball joint adapters for removal and installation of press-in type ball joints.-Storage case includes usage photos and instructions. Dimensions: -Dimensions: 12'' H x 17.63'' W x 3.5'' D. Warranty: -Lifetime limited warranty.
"Removes and replaces most press fit ball joints using a heavy duty forged webbing C-clampSupplied in blow mold case with three receiver tubesIncludes installing and removing adaptersJaws open to 6.4"" wideC-Frame press alone can be used to remove and replace universal joints and truck brake anchor pins Puller length: 10"" Receiving Tube sizes: 2"" OD, 21/2"" OD, 3"" OD Kit contents: TEJ7248-YOKE 25 ton forged Webbing Yoke, TEJ7249-B Center Forcing screw, TEJ7249-S 50, 65, 70mm Receiving Sleeves, 1
Ball joint service set 4-in 1. Removes and installs press fit parts, such as ball joints, universal joints and truck anchor pins without makeshift techniques. Takes out even rusted and corroded parts.
"Pneumatic Tie Rod / Ball Joint Separator Kit Features and Benefits Works with hand and pneumatic air systems to remove tie rods, ball joint, and pittman arm assemblies Includes most popular sizes: 1-1/8"", 15/16"" and 11/16"" Chrome plated to protect against corrosion and improved visibility Knurled handle for improved grip on the non air tool handle Blow molded storage case "
Sealey Ball Joint Removal /Installation Set - Mercedes SprinterFor use in conjunction with Sealey Hydraulic Ball Joint Installer/Removal Kit (Model No. VSE127H). Each set contains adaptors for bush removal on various vehicles.• For use in conjunction with Sealey Hydraulic Ball Joint Installer/Removal Kit (Model No. VSE127H). • Essential tool for removal /installation of the front lower ball joint in situ. • Includes all necessary adaptors. • Model No. VSE127H05• For use in conjunction with Sealey Hydraulic
"Ball Joint Service Tool Set Features and Benefits: The tools in this set will press in, or out, most sizes of press-fit ball joints The C-frame can be used alone to remove and replace universal joints Contains: C-frame press, 3 receiver tubes (2-3/4"" I.D. x 3"" O.D., 2-1/4"" I.D. x 2-1/2"" O.D., and 1-3/4"" I.D. x 2"" O.D.), installing adapter, removing adapter and plastic carrying case, Weight: 15 lbs., 3 oz. otc 7249 "
Performance Tool 4-In-1 Ball Joint Adapter Set, Model# W89304 Item# 250001 Ball joint adapter set allows you to service press-fit upper and lower ball joints without removing the control arm. Designed to service most cars and light trucks, along with U-joints either on or off the vehicle. (1) Ball joint adapter set 4 x 4 adapters allow removal and installation of upper and lower ball joints on 1967 to current 4WD vehicles with Dana 44 axles Remove and install brake anchor pins Key Specs Item # 250001
Add-On Ball Joint Adapter Set for Model ATD-8696 Deluxe Ball Joint Service Set ATD8697This add-on set expands the serviceability of your Deluxe Ball Joint Service Set (ATD-8696 not included). Includes all the receiver tubes and removing /installing . . .
Tie Rod/Ball Joint Separator Fork, 1 7/16 In, Overall Length 4 In, For Use With 1TFX3, 1TFX4, 1TFX5, 11389 Slide Hammer Sledges, For Removal of Tie Rods and Ball Joints
Ball joint adapter set allows you to service press-fit upper and lower ball joints without removing the control arm. Designed to service most cars and light trucks, along with U-joints either on or off the vehicle. Pieces qty. 7, Single, Pair, or Set...
CTA Tools 4006 Chrysler Ball Joint Socket-1-59/64-Inch is designed to remove and install the screw-in type ball joints used on mid-size, rear-wheel drive Chrysler cars. Intended for use with a 3/4-Inch drive. Heavy-duty construction allows for strength and durability. Whether tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.
Powerbuilt, 641321, Service Kits, Automotive Tools, Ball Joints, Honda Lower Ball Joint Adapter Kit Powerbuilt is the premier tool and equipment brand marketed by Alltrade Inc for the American and world-wide market. The Powerbuilt product line has been painstakingly developed and refined by Alltrade's R D Special product development teams, to ensure each and every product meets or exceeds The American National Standards Institute (ANSI) Standard. ANSI is considered to be the governing standards for hand
Heavy Duty C-Frame Press, Receiver Tubes Installation Designed For The Removal Installation of Press Fit Parts Such as Ball Joints Manufacturer look and detail may vary STA-25099/11370 International Buyers – Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility .Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. Contains: 3 Receiver Tubes 2-3/4" I.D. x 3" O.D. 2-1/4" I.D. x 2-1/2" O.D. 1-3/4" I.D. x 2" O.D. Installation and Removing Adapters: 1 Installing Cup 1 Receiving Cup 1 Installing Adapter Weight: 15 lbs., 3 oz.
Pneumatic Tie Rod / Ball Joint Separator KitFeatures and Benefits Works with hand and pneumatic air systems to remove tie rods, ball joint, and pittman arm assemblies Includes most popular sizes: 1-1/8, 15/16 and 11/16 Chrome plated to protect against corrosion and improved visibility Knurled handle for improved grip on the non air tool handle Blow molded storage case
Excellent for removal and installation of press-fit parts Designed to remove rusted or corroded parts Blow molded case keeps the tools organized and easy to transport Case dimensions: 16 1/2 long x10 wide x 3 high
"Designed for the toughest applications, such as trucks, buses, off-road agricultural and construction machineryIdeal for removing stiff or seized ball jointsSpreads ball joints where the? ""direct action"" method can? t be used!Jaws open to 70mm/2.75""; jaw width: 36mm/1.4""Heated treated, drop forged steel body and bolt for long tool life in a tough environment. Most Diagnostic Tools products are available for in-store pickup from Advance Auto Parts."
Service Tool Kit, Ball Joint, U Joint And Anchor Pin, Material Carbon Steel, Removes And Replaces Ball Joints, For Use With Ratchet Or Spanner, Includes C-frame Press - 1mzn7, Receiver Tubes, 3 In Od X 2 3/4 In Id, 2 1/2 In Od X 2 1/4 In Id, 2 In Od X 1 3/4 In Id, Installing Adapter And Removing Adapter
For removal and installation of ball joint adjusting sleeves on 1/2-, 3/4-, and 1-ton Dana open yoke front axles found on Ford, GM, Chrysler, IHC and Jeep 4WD vehicles. Tool permits easy torquing with 1" socket for proper upper ball joint preload. Same as Ford No. T71T-3010-G
Service Tool Kit, Ball Joint, U Joint And Anchor Pin, Material Carbon Steel, Removes And Replaces Ball Joints, For Use With Ratchet Or Spanner, Includes CFrame Press G1171755, Receiver Tubes, 3 In OD x 2 3/4 In ID, 2 1/2 In OD x 2 1/4 In ID, 2 In OD x 1 3/4 In ID, Installing Adapter And Removing Adapter