-
DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase
The DELTA 33-421 18-inch 7-1/2 HP, three-phase radial arm saw uses a unique turret arm that permits the saw blade to rotate 360 degrees above the table for miter cuts. The Micro-Set miter stops ensures perfect miter cuts each and every time, and the huge 44 x 36-1/2-inch table will handle large stock with ease. The powerful 7-1/2 HP , three-phase motor generates 3,450 RPM to the 18-inch blade for making easy crosscuts up to 29 inches, 45 degree miters up to 22 inches, and maximum rips up to 41 inches.
$6,840 -
DELTA RS830 10-Inch 1-1/2-Horsepower Radial Arm Saw, 115/230-Volt 1-Phase
The DELTA RS830 10-inch Professional Radial Arm Saw makes safe, accurate cuts each and every time, and it features a high-quality steel stand for sturdy support. Cut stock as wide as 16 inches with ease, and use the 10-inch blade to make miter cuts at up to a 45 degree angle. The RS830's cast-iron track and column provide exceptional support during cuts and minimize vibration. Depth-of-cut control handles are conveniently mounted above the table for easy access. For added versatility, DELTA fitted the RS830
$1,635 -
Amana Tool A.G.E. Series MD12-726TB Thin Kerf Sliding Compound Miter & Radial Arm 12-Inch x 72 Tooth ATB 1-Inch Bore Saw Blade
This blade is designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard. Ideal for underpowered saws; the thin kerf reduces the horsepower requirements.
$61.67 -
Amana Tool A.G.E. Series MD8-606TB Thin Kerf Sliding Compound Miter & Radial Arm 8-1/2-Inch x 60 Tooth ATB 5/8 Bore Saw Blade
Provides an excellend finish in soft/hardwoods. Designed for use in a sliding compund miter saw. 8-1/2-Inch x 60 Teeth Alternate Top Bevel grind, -3 Degree Hook, 5/8-Inch Bore Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage Thin Kerf reduce waste in material and require less horsepower. Industrial Quality. Made in Germany., Manufacturer: Amana Tool
$45.82 -
Radial Arm Saws:
> Radial Arm Saws Radial Arm Saws: Showing 1 - 11 of 11 Products Delta Machinery 33-411 16-Inch 5 Horsepower Radial Arm Saw, 230/460-Volt 3 phase $5,880.00 10-Inch 1-1/2 Horsepower Radial Arm Saw, 115/230-Volt 1 Phase $1,587.50 Specifications Depth: 34 Height: 57 Width: 44 14-Inch 3 Horsepower Radial Arm Saw, 230-Volt 1 phase $5,930.40 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase $6,972.00 12-Inch 2 Horsepower Radial Arm Saw, 230-Volt 1 Phase $2,857.50 Specifications Height: 63.5 Length: 32
$5,880 -
DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase
: DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase DELTA 33-421 18-Inch 7-1/2 Horsepower Radial Arm Saw, 230/460-Volt 3 phase Delta DELTA Rating The DELTA 33-421 18-inch 7-1/2 HP, three-phase radial arm saw uses a unique turret arm that permits the saw blade to rotate 360 degrees above the table for miter cuts. The Micro-Set miter stops ensures perfect miter cuts each and every time, and the huge 44 x 36-1/2-inch table will handle large stock with ease. The powerful 7-1/2 HP ,
$6,840amazingkitchens -
Amana Tool A.G.E. Series MD10-606TB Thin Kerf Sliding Compound Miter & Radial Arm 10-Inch x 60 Tooth ATB 5/8 Bore Saw Blade
This blade is designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard. Ideal for underpowered saws; the thin kerf reduces the horsepower requirements.
$56.32 -
Thin Kerf Sliding Compound Miter & Radial Saw Blades - A.G.E. Series
» Thin Kerf Sliding Compound Miter & Radial Saw Blades - A.G.E. Series Thin Kerf Sliding Compound Miter & Radial Saw Blades - A.G.E. Series Thin Kerf Sliding Compound Miter Saw Blades • ATB (Alternate Top Bevel) • P erfect for compound miter, radial arm & chop saws (Delta, Dewalt, Hitachi) Specially designed for sliding compound miter saws, these thin kerf saw blades provides an exceptional finish. The 3°-5° negative hook angle provides an extra margin of safety by pushing the stock downward and toward the
$80.54 -
Amana Tool 185-240B 7-1/4" 24 Tooth TimberForce Saw Blade 5/8 arbor with diamond knockout
> Amana Tool 185-240B 7-1/4" 24 Tooth TimberForce Saw Blade 5/8 arbor with diamond knockout Amana Tool 185-240B 7-1/4" 24 Tooth TimberForce Saw Blade 5/8 arbor with diamond knockout AMA-185-240B Product Description • Yields a table saw quality cut with a hand-held machine. • 5/8 arbor with diamond knockout • 24 Tooth General purpose blade with anti-kick safety design and cooling slots to prevent heat build-up. The 'do-all" blade for a contractor. item:185-240B diameter:7-1/4" Teeth:24 Grind:ATB Kerf:.075
$7.95 -
Freud LU87R008 8-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower .Perma -Shield coating helps this blade pull 1/3 less on the saw which translates into over 38% more cutting power.ideal working range is from 3/4" to 2-3/4" thick. Application: Heavy-Duty Ripping For Underpowered Saws
$34.99 -
Freud LU87R009 9-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower .Perma -Shield coating helps this blade pull 1/3 less on the saw which translates into over 38% more cutting power.ideal working range is from 3/4" to 2-3/4" thick. Application: Heavy-Duty Ripping For Underpowered Saws
$41.43 -
Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws.5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. Application: Fine Finish Blades for Sliding Miter & Radial Arm Saws
$54.99 -
Freud LU87R012 12-Inch 30 Tooth ATB Thin Kerf Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower .Perma -Shield coating helps this blade pull 1/3 less on the saw which translates into over 38% more cutting power.ideal working range is from 3/4" to 2-3/4" thick. Application: Heavy-Duty Ripping For Underpowered Saws
$53.53 -
Freud LU91M012 12-Inch 72 Tooth ATB Thin Kerf Sliding Miter Saw Blade with 1-Inch Arbor
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws.5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. Application: Fine Finish Blades for Sliding Miter & Radial Arm Saws
$67.94 -
Timberline 150-400 Contractor 6-Inch Diameter by 40-Teeth by 1/2-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade
These blades feature an ultra thin kerf design requiring less horsepower and reduced stock loss. The Individual blades are fully tensioned, hand hammered and heat treated for virtually no run-out. We utilize premium carbide tips that can be re-sharpened many times. Blades are available for all types of materials and will fit most brands of portable battery and electrical saws, trim saws, portable table saws, contractor table saws, miter saws, compound miter saws, sliding compound miter saws, dual sliding
$16.49 -
Kerf
// Thin Kerf Rip Thin Kerf Rip Heavy-duty ripping blades for underpowered saws This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick. 602-8708 LU87R008 8" 22FLAT .087 5/8" Yes $34.99 602-8710 LU87R010 10" 24 ATB .094 5/8" Yes $39.99 602-8720 LU87R006M20 160MM 14
$29.99 -
Freud LU87R010, 10" Industrial Coated Thin Kerf Rip Saw Blades
Freud LU87R010, 10" Industrial Coated Thin Kerf Rip Saw Blades.The Freud LU87R010 Thin Kerf Rip Saw Blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power.
$39.99 -
240-600 - 8-12" x 60 T Saw Blade
240-600 - 8-12" x 60 T Saw Blade AM240-600 Timberline 240-600, 8-1/2" x 60T saw blade features a 3 degree, TCG grind This blade is designed for cutting thin non-ferrous products and plastics It features a 3¦ negative hook angle When cutting non-ferrous metals, a coolant or blade wax should be used and proper clamping devices employed Ultra thin kerf design requiring less horsepower and reduced stock loss Premium carbide tips that can be re-sharpened many times Fully tensioned, hand hammered and heat treated
$38.89eTools-r-Us -
Dust Extraction System:
Rotary Saws > Dust Extraction System Dust Extraction System: Bosch SC400 Dust Extraction Hood & Vacuum Adapter Our Price: $4.55 You Save: 35% Dewalt D25111K 1" SDS Pistol Grip SINGLE Mode Hammer 5/8" - 2-1/8" Capacity Tube and Conduit Cutter with ... 10-Inch 1-1/2 Horsepower Radial Arm Saw, 115/230-Vol...
$4.55 -
mobility in the shop.
Delta 36-979 10'' Left-Tilt 1-1/2 Horsepower Contractor Saw with No Fence, 115/230-Volt 1 Phase Delta Model 36-979 Includes 1-1/2 HP, 115V/230V motor, two cast-iron extension wings, deluxe miter gauge, mobility kit, see-thru blade guard with splitter, 10" saw blade, table insert, V-belt arbor pulley, heavy-duty steel stand, dust collection insert and instruction manual. The Delta Difference • Powerful 1-1/2 HP induction motor handles tough cutting operations. • Large cast-iron table with cast-iron extension
$699.99
sponsored links
