Stanley J5402 Proto 1/2-inch Drive Phillips Screwdriver Bit Socket - No. 2 Bit holders have a hex opening to hold the bit allowing the bit holder to take the full load of torque. Made of heat-treated alloy steel. Polished chrome finish. 1/2-inch Drive Phillips Screwdriver Bit Sockets No.2 Tip Size.
Made in the U-S-A- Ball hex bit sockets allow a working angle up to 30 degrees to provide improved access to hard-to-reach fasteners- Bit sockets feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance- Through-hole design makes it easier to replace worn or broken bits: simply pop the old bit out and insert a new replacement bit- The new bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working- Bits are
These 1/4" Drive screwdriver bit are used for use on plugs in electronic rack Airbus A320–A340.
Includes the following bit sockets: 4MM, 5MM and 6MM Slotted; #1, #2, and #3 Phillips; #2 Pozidriv . Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail.
Shop for Hand Tools at The Home Depot. The Milwaukee 48-22-2302 is a 10-in-1 General Purpose Ratcheting Multi-Bit Driver. The 48-22-2302 has a durable all metal ratchet, and bit storage in the handle of the driver. The ratcheting driver's 3-1/2 in. bits all have power grooves for easy compatibility with Power Tools. The driver contains the following 7 bits: (1) #1 Phillips, (1) #2 Phillips, (1) #1 Square, (1) #2 Square, (1) #3 Square, (1) 1/4 in Slotted, and (1) 3/16 in. Slotted. All Milwaukee 10-in-1 Multi
IN 30 L 8-95 Features: -Product Type:Bit Sockets -Drive Size:3/8" -Measurement Type:Metric -Metric Socket Size:8 mm -Contact Points:6 Point (Hex) -Quantity:Single. Dimensions: -Overall Product Weight:0.16
Product Type: Bit Sockets.Drive Size: /2.Measurement Type: Metric.Contact Points: Torx.Quantity: Single.Overall Product Weight: 0.2 .Dimensions: 0.89'' H x 0.89'' W x 3.94'' D"
Screwdriver Bit Kit, Number of Pieces 65, Includes 1/4 Hex Shank, (2) 1/16, 5/64, 3/32, 7/64, 1/8 In (1) 9/64, 3/16, 13/64, 7/32, 15/64, 1/4, 3/8 In Drill Bits, (4) #1, #2 Phillips, (4) #2 Double Ended Bits, (2) #3 Phillips, (2) #6, #8, #10, (2) 2 In #8, (2) #1 Square, (5), #2 Square, (2) T15, T20, T30, (1) 1/2, 3/4, 7/8 In Spade Drills, (1) 1/4, 5/16 In Nut Driver, (1) Pivot Holder, (1) Compact Mag Drive Guide, (1) 3/8, 7/16, 1/2, 9/16 In Socket, (1) 1/4 To 3/8 Socket Adaptor, Mag Tray, Case
Shop for Hand Tools at The Home Depot. The Milwaukee 48-22-2102 is a 10 in 1 General Purpose Multi-Bit Driver. The 48-22-2102 has 3-1/2 in. chrome plated bits, and bit storage in the handle of the driver. The multi bit driver's bits also have power grooves for easy compatibility with power tools. The driver contains the following 7 bits: (1) #1 Phillips, (1) #2 Phillips, (1) #1 Square, (1) #2 Square, (1) #3 Square, (1) 1/4 in. Slotted and (1) 3/16 in. Slotted. All Milwaukee 10-in-1 Multi Bit Drivers deliver
Contains: 1 piece drive guide 3" length, 1/4" hex shank retractable stubby shortened model for access into tighter work spaces and 15 pieces of 1" screwdriver bits: (1) Phillips no. 1, (5) Phillips no. 2, (1) Phillips no. 3, (3) pieces drywall bits, (1) square recess no. 1, (3) square recess no. 2 and (1) square recess no. 3
Screwdriver Bit Set, Number of Pieces 20, Material Steel, Includes Magnetic Drive Guide, (19) 1 In. Insert Bits: P1, (7) P2, P3, SQ1, (3) SQ2, SQ3, T15, T20, T25,SL68, SL810 , Package Quantity 20
Features and Benefits: Essential for car, machine tool, household appliance and electronic repairs, etc. Chrome vanadium adapters with satin finish Blow molded case for easy storage and transport Set includes: Made of industrial quality S2 steel Magnetic bit holder Socket bit holder 1/4-inch sq. x 1/4-inch hex extensions: 1-inch & 2-inch Phillips - #0, 1, 2, 3 Posidrive - #0, 1, 2, 3 Slotted - 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8 Spanner - 4, 6, 8, 10 Torx - T8, T10, T15, T20, T25, T27, T30, T40, T45 Tamperproof
These 1/4" Drive screwdriver bit are used for TRI-WING screws.
Powerbuilt, 646506, Screw Driving Kits, Fastening Accessories, 10 Piece, 10 Piece Screwdriver Bit Set Powerbuilt is the premier tool and equipment brand marketed by Alltrade Inc for the American and world-wide market. The Powerbuilt product line has been painstakingly developed and refined by Alltrade's R D Special product development teams, to ensure each and every product meets or exceeds The American National Standards Institute (ANSI) Standard. ANSI is considered to be the governing standards for hand
26000Tamper -Resistant TorxR Bit Set Seven 1/4" hex insert bits with 1/4" drive bit holder. T-10 through T-40. Fits tamper-resistant TorxR fasteners found on radio mountings, exterior mirrors, carburetors and other applications. Skin-packed. Shipping wt. 3 oz.
Impact Screwdriver Bit, SAE, Size #2, Tip Type Phillips, Bit Length 1/4 In., Drive Size 1/4 In., Drive Type Hex, Overall Length 1 In., Finish Black Oxide, Number of Points 4, Standards ANSI Standard
Stanley J5404 Proto 1/2-inch Drive Phillips Screwdriver Bit Socket - No. 4 Bit holders have a hex opening to hold the bit allowing the bit holder to take the full load of torque. Made of heat-treated alloy steel. Polished chrome finish. 1/2-inch Drive Phillips Screwdriver Bit Sockets No.4 Tip Size.
Product Type: Bit Sockets.Drive Size: /4.Measurement Type: SAE.SAE Socket SIze: 2".Quantity: Single.Overall Product Weight: 0.03.Dimensions: 0.5'' H x 0.5'' W x . '' D"
This screwdriver inserts is for slotted screws and it has 1/8 inches drive
Features Includes most popular insert bits power bits and nut setters. Sets enclosed in rugged storage case with rubber over-mold for added impact resistance. IRWIN Insert Bits are compact economical bits that change over quickly and require less storage space. Power Bits are specifically designed for the higher torque requirements of power tools. Nutsetters are ideal for use with sheet metal screws and other hexagonal head fasteners. Dimension - 11.06 x 10.94 x 10.25 in. Item Weight - 9.49 lbs. </ul>
Product Type: Bit Sockets.Drive Size: /2.Quantity: Single.Overall Product Weight: 0.43.With pressed-in pin in vanadium special steel, manganese -phosphated .Square drive as per DIN 3 20 - C 2.5, ISO 74, with ball retaining groove"
DTG1464Features Product Type: Bit Sockets Drive Size:1/2" Measurement Type: SAE SAE Socket SIze: Set Contact Points: Torx Quantity: Set Dimensions Overall Product Weight:1.81
Shop for Hand Tools at The Home Depot. Drive just about every type and size of fastener out there with this compact set of power screwdriver bits. Housed in a unique carry case with rotating bit trays for easy access. Includes a quick change bit holder to save even more time. Kawasaki power tools and equipment deliver quality, value and satisfaction to do-it-yourself consumers. Kawasaki power tool users rate Kawasaki value higher than any other leading brand. For over 35 years, Kawasaki has brought
S2 hardened steel Includes 32-1" screwdriver bits and magnetic holder sizes: square recess nos. 0, 1, 2 and 3, Phillips nos. nos. 1, 2 and 3, 2 drywall, slot 3- 4, 6-8, 8-10 and 10-12, star nos. T8, T9, T10, T15, T20, T25, T27, T30 and T40, posidrive nos. PZ0, PZ1, PZ2 and PZ 3, Hex nos. H2, H2.5, H3, H4, H5, H5.5, and H6 Also includes magnetic bit holder
Stanley J4738 Proto 1/4-inch Drive Phillips Screwdriver Bit Socket - No. 2 Two piece design allows replacement of worn bits - Bit holders have a hex opening to hold the bit allowing the bit holder to take the full load of torque 1/4-inch Drive Phillips Screwdriver Bit Sockets No.2 Tip size 1-13/64-inch Overall length 0.05-lbs Weight.
Bosch TDR2203 2 Square R2 Titanium Square Power Drive Screwdriver Bit (3 Pack) Bosch titanium screwdriver bits feature patented Titanium Tough Grip coating. These innovative bits start with a rough surface that actually grips the entire inside dimension of the screw head with millions of gripping points. The bits are then coated with titanium to provide a hard surface that protects the gripping points from the rigors of repetitive use. Features: Titanium Tough Grip coating significantly reduces slippage
7/64 x 15/16 Slotted 1/2 Drive Socket Screwdriver BitFeatures and Benefits: Specifically heat treated for the correct balance of strength and durability These high quality tools include a lifetime warranty and are proudly made in the USA!1/2 Drive Screwdriver Drag Link socket with a blade size of 7/64 x 15/16.
"45471Bit Holder Socket and Bits, 3/8"" Drive Made in the U.S.A., featuring quality workmanship and value. Bits are available for all common fastener patterns. With use of a ratchet, T-handle or spinner handle, they offer high-torque capabilities. With the help of an extension or universal joint, they can reach into awkward spaces. Screwdriver Bit Sockets Description: #4 Slotted Bit Socket Hex Shank: 1/4"" Length: 1.69. Most Socket Sets products are available for in-store pickup from Advance Auto Parts."