This mobile generator is powered by a Perkins mobile EPA-certified diesel engine. Taylor Power Systems custom-built trailer is specially designed and built for transporting Taylor Power S...
This generator has an 10 HP 418 cc diesel engine. The engine has heavy duty cast iron sleeve design for better performance and longer life. This unit produces 5000 watts of running power and a 5500 watt surge. Standard features on this unit offer a heavy duty wheel kit and hour running meter. The 12.5 gallon fuel tank allows this generator to run approximately 11.8 hrs under a 1/2 power load. The power outlets on this unit are as follows: 120V 30amp twist lock L5-30R, 240V 30amp twist lock L14-30R, 120V 20
This generator has an 5.4HP diesel engine. The engine has heavy duty cast iron sleeve design for better performance and longer life. This unit produces 3500 watts of running power and a 4000Watt surge Standard features on this unit offer a heavy duty...
Be prepared with a diesel generator from AmicoShop accessory powers a variety of toolsGenerator is an essential in any garageFrequency: 60 Hz Voltage (AC): 120 volts/240 voltsRated AC power: 4000 watts Maximum AC power: 4500 wattsAC current: 120 volts/37.5 amps and 240 volts/18.75 ampsDC output: 12 volts/8.3 amps Engine speed: 3600 rpmPower factor : 1.0 (cosf) Starting mode: Remote control, electric start and recoil startNet weight: 196 pounds/89 kg Dimensions: 720 mm long x 455 mm wide x 545 mm highEngine
The Big 40 is powered by CAT diesel engine with added power, features and improved noise reduction at both idle and weld speed. New industrial-grade, sealed marine ignition switch with starter interlock prevents the starter from engaging while the engine is running. Protects ring gear and starter from abuse. Quiet, only 65 db (90Lwa) at idle and 73.8 db (98.7 Lwa)at 23 ft and maximum output. Improves work site environment and communication. Hot Start provides positive Stick electrode starts to make it easy
Rugged engine drive is the standard for Stick and Flux Cored welding! Bobcat 250 Diesel has the power and the key features that help you turn a profit. 10,500 watts of Accu-Rated - Not Inflated generator power. Cranks out enough power for most applications: job site, farm/ranch, or home. Miller provides the strongest and most reliable generator power. Our Accu-Rated standard for measuring generator power guarantees delivery of all the power its machine promises. New larger fuel capacity, 12-gallon tank
Miller Electric Mfg Co Big Blue Air Pak Engine Driven Welder / Generator, Diesel, 1- Phase, 20 - 750 DC - 907062 - XXX SKU #: MLR1060 List Price: $63,043.20 You Save: $35,376.20 (56%) Sale Price: $27,667.00 (Varies with options) Shipping: Select Type Base Product BIG BLUE AIR PAK CC/CV COLD WEATHER PKG- add $650.00 BIG BLUE AIR PAK CC/CV DELUXE PKG- add $1,625.00 The Big Blue Air Pak is the complete package: a multiprocess welder, generator, air compressor, and optional battery charger. Deutz turbo-charged
Miller Electric Mfg Co PipePro 304 Engine Driven Welder / Generator, Diesel, 1- & 3- Phase, 5 - 400 DC - 903731 SKU #: MLR1053 Shipping: Base Product The PipePro 304 is a quiet, compact, yet extremely powerful multiprocess diesel engine driven unit designed especially for the cross country pipeliner and mechanical contractor. Weld At Idle provides up to 5000 watts of weld power (225 A at 23 V, 170 A at 30 V), and when more power is needed the machine automatically goes to high speed with no changes in the
Made by Jiangdong Welder/Generator 5000 Watt/6000 Watt Surge 10 Hp. OHV 418 cc Diesel Engine, 4.2 Gallon Fuel Tank Product Number: JD6000-LDEW Diesel Electric Start: Yes Watts: 5000 Surge: 6000 Voltage: 120 Shipping Weight: 380 Pounds Condition: Runs 8.5 hrs. @ 75% Load Noise 72 db 2 Duplex Plugs 1 Twist Lock Welding Amp Range 50-180 Amps AC
The PipePro 304 is a quiet, compact, yet extremely powerful multiprocess diesel engine driven unit designed especially for the cross country pipeliner and mechanical contractor. Weld At Idle provides up to 5000 watts of weld power (225 A at 23 V, 170 A at 30 V), and when more power is needed the machine automatically goes to high speed with no changes in the arc. Patented dual-power option operates on engine or 230 volt single- or three-phase electric input power which eliminates fuel cost, noise, engine
The Trailblazer Pro 350 D is designed for the professional welder who needs a machine with higher outputs and excellent arc performance for all types of welding jobs. Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. 12,000 watt voltage-regulated generator power allows tools, inverter welders or plasma cutters to run without affecting the arc while welding. Standard GFCI receptacles are required on most
The PipePro 304 is a quiet, compact, yet extremely powerful multiprocess diesel engine driven unit designed especially for the cross country pipeliner and mechanical contractor. Weld At Idle provides up to 5000 watts of weld power (225 A at 23 V, 170 A at 30 V), and when more power is needed the machine automatically goes to high speed with no changes in the arc. Patented dual-power option operates on engine or 230 volt single- or three-phase electric input power which eliminates fuel cost, noise, engine
The Pro 300 by Miller is a low speed, compact diesel welder ideal for professional welders. Compact and lightweight - designed to be the smallest, lightest 1800-RPM low-speed diesel. Easy to transport from one job to another. Features include Stick, Lift-Arc TIG, Flux Cored and CV short arc MIG. Other features include digital preset weld meters, output contactor control and automatic idle. Quiet at only 73 dba (98 Lwa) at at 23 ft at maximum output. Improves work site communication and safety. The
The Big 40 is powered by CAT diesel engine with added power, features and improved noise reduction at both idle and weld speed. New industrial-grade, sealed marine ignition switch with starter interlock prevents the starter from engaging while the engine is running. Protects ring gear and starter from abuse. Quiet, only 65 db (90Lwa) at idle and 73.8 db (98.7 Lwa)at 23 ft and maximum output. Improves work site environment and communication. Hot Start provides positive Stick electrode starts to make it easy
The Big Blue Turbo equals high altitude, high output multiprocess welder that provides a superior arc. New 600 amps at 100% duty cycle. Duetz turbo-charged four-cylinder diesel engine provides ample power at high altitudes. Quiet - at only 70 db (95 Lwa) when idle, 79 db (104 Lwa) at maximum output. Improves work site communications. Hot Start provides positive stick electrode starts to make it easy to start all types of electrodes. Arc-Drive makes welding easy. Automatically enhances Stick welding,
Miller Electric Mfg Co Big 40 Engine Driven Welder / Generator, Diesel, 1- Phase, 20 - 500 DC - 907171 - X SKU #: MLR1055 List Price: $32,872.80 You Save: $17,745.80 (54%) Sale Price: $15,127.00 (Varies with options) Shipping: Select Type BIG 40 C CC/CV- add $640.00 BIG 40 C CC/CV DELUXE- add $1,515.00 Base Product C = Caterpillar 3024 liquid-cooled, 4-cylinder, diesel engine, 33 HP at 1800 RPM Deluxe includes 15,000 watt generator power, Weld Meters and AC/DC Polarity Switch. Caterpillar engine, 33 HP at
The Miller Du-Op is a dual-operator welding generator is two seperate high performance welding machines powered by one dependable engine. New! Deutz F3L914 EPA engine has 14% more horsepower. New automatic engine shutdown protects engine if low oil pressure or high coolant temperature occurs. Multiprocess capabilities performed independently at the same time - each operator has a choice of Stick, TIG or MIG. Paralleling switch parallels both outputs to a single side for double the amperage. This provides a
The Big Blue Air Pak is the complete package: a multiprocess welder, generator, air compressor, and optional battery charger. Deutz turbo-charged four-cylinder diesel engine provides ample power at high altitudes. Ingersoll-Rand ultra-reliable industrial rotary screw air compressor. Belt-driven with automatic belt tensioner with a life expectancy of 30,000 hours. Independent compressor controls include an on/off switch for applications not requiring compressed air. At idle speed, the Air Pak will produce
The Big Blue 400 is designed for fleet owners, easy to maintain and always ready to weld. Prior Big Blue 302 owners now have a choice between the Big Blue 400 or the PRO 300. Engine gauges are now standard on all models. Oil pressure and coolant temperature gauges provide visual engine vitals. Cleaner running tier II engines; Deutz 2011 and Perkins 404 Series. Hot Start provides positive Stick electrode starts to make it easy to start all types of electrodes, and works great for bead tie-ins. Arc-Drive
The Big Blue 500 is designed for fleet owners because it is easy to maintain and always ready to weld. Engine gauges are standard on all models. Oil pressure and coolant temperature gauges provide visual engine vitals. Hot Start provides positive Stick electrode starts to make it easy to start all types of electrodes, and works great for bead tie-ins. Arc-Drive makes the welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out.