-
Keysco Tools Slide Hammer Dent Puller
To use dent puller, drill a 1/8in. hole in sheet metal, turn screw into hole and hammer out dents. Includes L puller, door edge tool with 2 nuts, and nosepiece with 2 screws.
Find more:
-
Tool Aid 81200 Midi-Weight Slide Hammer Dent Puller
Midi-Weight Slide Hammer Dent Puller Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb. Slugger slide weight is too heavy
Find more:
-
Dent Fix Equipment The Stripper - Undercoating And Pin-Stripe Removal Air Tool
The Stripper blasts through the heaviest undercoating, chip guard, and seam sealer in seconds. Not just for undercoating - It throroughly cleans and exposes welds effortlessly, cleans metal of rust, dirt and paint. It is sure to become one your most used tools. Sand blasted results without the cost, mess, or health hazard. Slash time off labor-intensive jobs, and cut equipment and supply costs. Innovative MBX wire brushes strip and clean the substrate while not weakening the metal, or creating excessive
Find more:
-
Dent Puller And Slide Hammer
The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12'' plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian's hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and ''L'' puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2''-20.By Tool Aid.
$26.95Find more:
-
Tool Aid Dent Puller & Slide Hammer
Tool Aid Dent Puller & Slide Hammer 0246-ta-81400 $29.03 $23.23 Tool Aid Dent Puller and Slide Hammer The largest selling and most economical body shop dent puller in the industry. 3 lb. slide weight is mounted on 12" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technician's hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and "L" puller hook fabricated of aircraft quality
$23.23Brandsplace.comFind more:
-
THE "GLUE PULLER" PAINTLESS DENT REMOVAL
THE "GLUE PULLER" PAINTLESS DENT REMOVAL Item ID: PBE DRE 7617 EDP: 31405 Weight: 12.00 lbs. Price: $ 359.00 *Shipping estimate: $ 10.49 Quantity: 7617 “Glue Puller” Paintless Dent Removal • Most efficient way to remove dents without damaging the paint • No holes to drill, no interior panels to remove • Work on panels where conventional tools will not reach • Dual lever action for even weight distribution while pulling • Large protective feet adjust to contours of panel surface • Works great on door dings,
$359.00Find more:
-
Cal-Van Tools Body Dent/Seal Remover - 49500
Tool used to pull dented sheet metal back into position. To use, drill hole in the deepest part of the dent, insert hook or self-threading screw tip and tap lightly with a 2-1/2 lb. slide hammer to remove dent. A 13-inch long that enables high pulling...
Find more:
-
Dent Fix Equipment DF701 The Stripper - Undercoating and Pin-Stripe Removal Air Tool
Specialty Air Tool DFXDF701 Dent Fix Equipment DF701 The Stripper - Undercoating and Pin-Stripe Removal Air Tool Part # DFXDF701 Features: • The Stripper blasts through the heaviest undercoating, chip guard, and seam sealer in seconds. Not just for undercoating - It throroughly cleans and exposes welds effortlessly, cleans metal of rust, dirt and paint. It is sure to become one your most used tools. • Sand blasted results without the cost, mess, or health hazard. • Slash time off labor-intensive jobs, and
$231.71ToolfetchFind more:
-
ATD Tools (ATD5160) Muscle Max 10 lbs. Heavy-Duty Dent Puller Set # 5160
Also known as: ATD-5160, ATD5160; Contains: 10 lbs. hammer (2) Pipes (1) 2-hole pipe Hex nut Chain and hook (5) Plates Molded storage case
$79.99Find more:
-
KD Tools KDT2761 6 Inch Dent Puller Suction Cup
"features and benefits: puller also functions as a glass holder super-tough rubber cup no hole drilling works on the dents on non-creased sheet metalpuller easily pops dented hoods doors and fenders into place. 6"" diameter suction disc with steel handle and steel support plates enables strong pull. it works on nearly every dent where the sheet metal has not been creased. lift edge to release suction. this suction cup dent puller is one of many top quality items in the auto body repair department."
-
Keysco Tools Slide Hammer Dent Puller
> Item# 117352 Keysco Tools Slide Hammer Dent Puller To use dent puller, drill a 1/8in. hole in sheet metal, turn screw into hole and hammer out dents. Includes "L" puller, door edge tool with 2 nuts, and nosepiece with 2 screws. 5.0 lbs storeId =6970 &catalogId =4006970 &langId = -1 &productId =200334163 /webapp /wcs /stores /servlet /product _6970 _200334163 _200334163 (1) Slide hammer (7) Attachments Related Products You may be interested in these Auto Body Tools Item# 144763 Item# 14476 Item# 9094230
-
Advanced Tool Design Model ATD-7541 Extra Duty Dent Puller
Heavy duty dent puller/slide hammer with vinyl cushion finger grip hang-up handle. Comes with extra screws and hook for pulling bearings and seals.
Find more:
-
KD Tools 2290 Slide Hammer Dent Pulling Set
KD Tools 2290 Slide Hammer Dent Pulling Set Part Number: KDT2290 Description KD Tools 2290 Slide Hammer Dent Pulling Set. Tool pulls dented sheet metal back into place. To use, drill a hole in the deepest part of the dent, insert the hook or self-threading screw tip and tap lightly with the 2-1/2lb slide hammer to remove the dent. A 13"-long shaft enables high pulling force. Slide hammer has 1/2-13 UNC thread. Availability: In stock. Usually ships within 24. Ships via UPS.
$32.50Find more:
-
Junior Slugger Slide Hammer Dent Puller: H
Features and Benefits: The finest shop engineered heavy duty slide hammer with 3 lb. slide weight Features a soft vinyl "Hang-It" handle grip for easy storage and shock cushioning Special wide aircraft steel body hook is used to pull curls and creases in quarter, rocker, back and door panels "L" hook, broached nose cone, two jam nuts and two hardened pulling screws are supplied Total weight is 5 lbs.Designed for the professional body technician - a lifetime tool. Nose cone and shaft threads are 1/2" - 20.
$36.39Kalyx.comFind more:
-
Tool Aid Midi-Weight Slide Hammer Dent Puller
Provides excellent balance with 5lb. Slide weight on plated, solid, 5/8 inch shaft. Exclusive soft cushion vinyl grip with Hang-It hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb. Slugger slide weight is too heavy and the pullers with 3 lb. Weights
Find more:
-
Dent Fix Equipment
Dent Fix Equipment MAXI 220V Dent Pulling Station THE MAXI is a 220 volt single phase dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas. The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. THE MAXI takes the idea of a stud welder much further, this versatile tool will: • Weld pins • Weld a slide hammer directly to the panel • Weld a light pulling
$1,176Find more:
-
Dent Fix DF-700 ELIMINATOR PANEL STRIPPING KIT TOOL CRS MED FINE BRUSHES DENT
DEN DF-700 SIZE: KIT ELIMINATOR PANEL STRIPPING KIT TOOL CRS MED FINE BRUSHES Dent Fix Stud Welders & Pins DENT FIX STUD WELD GUNS & ACC.
$372.99Find more:
-
KD Tools 2290 Slide Hammer Dent Pulling Puller Set
> KD Tools 2290 Slide Hammer Dent Pulling Puller Set KD Tools 2290 Slide Hammer Dent Pulling Puller Set KDT2290 $34.39 Retail Price: $39.68 Description Rating Replacement part: 2290-70 Hook and Screw Package Body Dent Remover Tool pulls dented sheet metal back into place. To use, drill a hole in the deepest part of the dent, insert the hook or self-threading screw tip and tap lightly with the 2-1/2-lb slide hammer to remove the dent. A 13”-long shaft enables high pulling force. Slide hammer has _-13 UNC
$39.68SJ Discount Tools.comFind more:
-
Tool Aid Midi-Weight Slide Hammer Dent Puller
Tool Aid Midi-Weight Slide Hammer Dent Puller 0246-ta-81200 $60.89 $48.71 Tool Aid Midi-Weight Slide Hammer Dent Puller Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long.
$48.71Brandsplace.comFind more:
sponsored links
-
Dentcraft Tools
Professional Dent repair Tools & Accessory Online Store.
www.Dentcraft.com -
Dent Tools
Save huge on Dent Tools. eBay! It's where you go to save.
www.eBay.com/deals -
Affordable Paintless Dent Repairs
NY NJ best bet in Paintless Dent Repair & Removals. 800.969.0753
www.tristatedentworks.com -
Paintless Dent Repair
Find Your Franchise to Own Today. Request Ownership Information.
www.FranchiseSolutions.com
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
