features and benefits: removes and installs fan clutches includes a universal holding wrench and a universal turning wrench made of heat treated alloy steel to provide strength the holding wrench is adjustable to fit the bolts that attach the pulley to the water pump. The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8" (22 mm), 1-7/16" (36 mm), 1-9/16" (39 mm), 1-7/8" (47 mm) and 2" (50 mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts.
648651 Features: -Fan clutch wrench master kit. -For use on ford, jeep and some imported vehicles. -Includes smaller spanner type wrenches for engaging the hex nut on the fan clutch. -Includes larger square drive tools to hold the water pump output shaft stationary. Use: -Flare Nut Wrench. Quantity: -Set. Generic Dimensions: -13.38'' H x 15.75'' W x 3.25'' D. Dimensions: Overall Product Weight: -16.13 Pounds.
IJO2193 Features Spanner fan clutch wrench For GM, jeep and dodge trucks, vans and SUVs Double-ended spanner wrench fits the holes in pressed-on water pump pulleys Hold the pulley firm with the spanner wrench Use: Spanner Wrench Quantity: Single Product Type: Wrenches Generic Dimensions Weight: 2 lb. (5 oz.) Dimensions Overall Product Weight: 1 Pounds
CTA Tools A870 Ford Fan Clutch Wrench - 2-Piece Set is designed to remove and install fan clutch assemblies when replacing water pumps or doing other engine services. The sizes of the wrenches are 36 and 58-millimeters. For use with 1/2-Inch square drive tools and a torque wrench. Heavy-duty construction allows for strength and durability. Whether tuning up your 68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.
43300Wrench Set Pneumatic Fan ClutchFeatures and Benefits: Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Does the job much faster and easier than conventional fan clutch wrenches. No holding wrenches necessary. The set includes 7 driving wrenches that fit Ford, GM, and Chrysler. Driving wrench sizes include: 36mm, 1-1/2", 9/16", 41mm, 42mm, 1-7/8" and 2". Drive the fan clutch nut in the opposite direction to replace. Use with an air hammer.Set Includes: 43370 handle
Powerbuilt, 648746, Service Kits, Automotive Tools, Fan Clutch Kit, 4 Piece Fan Clutch Wrench Kit Powerbuilt is the premier tool and equipment brand marketed by Alltrade Inc for the American and world-wide market. The Powerbuilt product line has been painstakingly developed and refined by Alltrade's R D Special product development teams, to ensure each and every product meets or exceeds The American National Standards Institute (ANSI) Standard. ANSI is considered to be the governing standards for hand tool
A Nearly Universal Fan Clutch Wrench Set for Use on the Most Popular Applications. Unique hooked wrench design will hold bolted on water pump pulleys by applying pressure against another bolt. The double-sided spanner style holding wrench will hold pressed on pulleys on many GM, Jeep and Dodge vehicles. The double-ended turning wrench will work on 36mm and 47mm/1-7/8 sizes. 1/2 square drive holes in the tools are for use with a hand ratchet or breaker bar to create a handle and allow extra force to be
Complete set for easy removal of fan clutches when repairing or replacing water pumps, timing chains or fan clutch. Hold the fan clutch with the clutch holding tool while using the appropriate wrench to turn the fan clutch nut NOTE Be sure to check...
CTA Tools A877 Fan Clutch Wrench Set, 6-Piece is made for use in removing and installing fan clutch assemblies when replacing water pumps or doing other engine services. Use two wrenches together: one for holding, the other for turning. Sizes include: 40mm, 54mm x 72mm, 68mm x 76mm, 36mm x 48mm, 58mm x 83mm and 60mm. 1/2-Inch square drive built into most wrenches and packed in blow molded case. Fits most domestic applications.
OTC 7028 Clutch Adjusting Wrench for Spicer Clutches
features and benefits: removes and installs fan clutches includes a universal holding wrench and a universal turning wrench made of heat treated alloy steel to provide strength the holding wrench i...
Features and Benefits: For 3, 5 , 7 and 8 Series BMW Applications This heavy duty 32 mm wrench has been designed with extra length, a total of 17", to allow the technician to easily reach down to the fan clutch hex coupler The beefy design provides plenty of strength and leverage to loosen the toughest hex couplers This tools works handily with the SCH61600 Universal Fan Clutch Pulley Holding Tool. The heavy duty 32 mm wrench works on all models while the MS6160 universal holding tool works on all except
Features and Benefits: Use with 1/2" square drive tools and a torque wrench Remove and replace fan assembly on Ford 6.9L and 7.3L engines Wrench openings- Long: 48mm Wrench openings- Short: 83mmThis set is used to remove and replace the thermostatic fan assembly on Ford 6.9- and 7.3-L engines. This is not to be used with power tools. Refer to Ford factory service manual for torque specifications and thread direction.
CTA Tools A886 Two-Piece BMW Fan Clutch Wrench Set is expertly designed and crafted to the exacting standards expected from CTA Tools. This Two-Piece BMW Fan Clutch Wrench Set includes one tool that is designed to remove the lock nuts on the Thermo-Viscous Fan and another tool that holds the Water Pump Pulley while loosening the radiator fan. Engineered to service BMW models 323i, 325i, 328i, 330i, Audi Models A6 and VW models. This Two-Piece BMW Fan Clutch Wrench Set features an attractive Brick Nickel
LISLE TOOLS 43300 PNEUMATIC FAN CLUTCH WRENCH SET Offered by Rock Bottom Pricing, Inc. TOOL LIQUIDATORS Offered for sale is the LISLE TOOLS 43300 Pneumatic Fan Clutch Wrench Set Features: Quickly Removes Installs Fan Clutch When Repairing The Water Pump Or Fan Clutch. Does the job much faster and easier than conventional fan clutch wrenches. No holding wrench is necessary. The set includes 7 driving wrenches that fit Ford, GM and Chrysler. Driving wrench sizes include: 36mm, 1 1/2", 1 9/16", 41
OEM automotive specialty tools are designed to perform day after day in any environment. Our engineers design tools that maximize both performance and budget. OEM tools out-perform the competition time after time.
This 2-piece set removes and installs fan clutches The set includs a universal holding wrench and a universal turning wrench The holding wrench is adjustable to fit the bolts that attach the pulley to the water pump The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8" (22mm), 1 7/16" (36mm), 1 9/16" (39mm), 1 7/8" (47mm) and 2" (50mm) Both wrenches are long to provide extra leverage for stubborn fan clutch nuts Made of heat treated alloy steel to provide strength.Removes Fan
Quantity: Set.Product Type: Wrench Sets.Overall Product Weight: 6.Dimensions: 4.7'' H x 6.4'' W x 9.2'' D
Schley Products, Inc 62100 - Flat $8 shipping! 20 in stock as of 12/26/14 05:47 AM. AVOID BACKORDERS WITH US! features and benefits: for 3 5 7 and 8 series bmw applications this heavy duty 32 mm wrench has been designed with extra length a total of 17" to allow the technician to easily reach down to the fan clutch hex coupler the beefy design provides plenty of strength and leverage to loosen the toughest hex couplers this tools works handily with the sch61600 universal fan clutch pulley holding tool. the
Speed Clutch Wrench & Adjuster OSMR4000 O.S. ENGINES
Pneumatic Fan Clutch Wrench Set by Lisle XXX43300 Quickly removes and installs fan clutch when repairing the water pump or fan clutch Faster and easier than conventional fan clutch wrenches No holding wrench is necessary Drive the fan clutch nut in the opposite direction to replace Use with an air hammer Set Includes 7 driving wrenches that fit Ford, GM and Chrysler. Driving wrench sizes include: - 36mm - 1-1/2” - 1-9/16” - 41mm - 42mm - 1-7/8” - 2” Product Reviews for Lisle Pneumatic Fan Clutch Wrench
Shop for Tools & Hardware at The Home Depot. For removing threaded-on viscous fan clutches on Ford, Chrysler, Jeep and some imported vehicles. Includes 2-1/4 in. and 3-1/4 in. fan pulley holding tools, 2-3/8 in. fan clutch bolt holding tool, 2-1/8 in. and 3 in. fan clutch pulley holding tools, 2-13/16 in. fan hub wrench, 1-7/16 in. fan clutch nut wrench, 1-7/16 in. and 1-9/16 in. fan clutch wrench. Any automotive specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt
Clutch Adjusting Wrench, Length 5 In, Internal Adjustment Of Spicer Angle Spring And Multiple Lever Clutches, Number Of Pieces 4, Includes Gripper Handle, Hex Screw, Spacer And Wrench