Working load limit: 1 ton, Standard lift: 12 ft, Material: Tempered steel frame, Operating type: Ratchet, Lever ratio: 15:1, One piece - aluminum alloy ratchet wheel, High strength, electroplated steel parts, Notch-at-a-time letdown, Drop forged steel slip hooks; Non-slip plastic grip, Galvanized steel cable; OSHA recommended safety latches
Ratchet Puller, Lifting Capacity 1250/2500 lb., Pull Capacity 2500/5000 lb., Cable Length 20/10 ft., Min. Between Hooks 27 In., Cable Dia. 1/4 In., Finish Zinc Plated and Black Paint, Handle Length 18 In., Hook Opening 1 In., Material Steel, Ratchet Dual Interlocking, Standards ASME B30.21
Capacity: 4 ton Cable legth: 6 ft Cable lift: 6 ft Cable diameter: 3/16" Used for a wide range of lifting, lowering, stretching and pulling applications Galvanized aircraft quality cable Double locking drive pawls Drop forged steel frame galvanized against rust Forged steel hooks with OSHA recommended safety latches Oversized steel safety guard Stainless steel springs Automatic let-down with safety catch Cable guide guards against excessive wear 2 year limited warranty
Greenlee, 6037, Floor Mount, Floor Mount, Accessory, Cable Puller Floor Mount, Cable Puller Floor Mount with Maximum Weight Capacity of 6500 Pounds This pulling table is able to pull anything up to three and a quarter tons. Features: 6500 Pound Capacity Steel Construction Unique Floor Mounting Attachment For more than 140 years, Greenlee has been a provider of quality tools to the woodworking industry and, for over 70 years, to the electrical industry as well. Over 20 years ago, Greenlee made a commitment
Lift, lower, stretch and pull heavy loads with ease when you've got the Jet JCP-2 2-Ton 6' Lift Cable Puller (180420). It has a 2-ton capacity, and is constructed from lightweight zinc plated steel to resist corrosion.
Made for heavy lifting pulling and winching with a 3 ton capacity. Most durable lifting/pulling portable device ever made. Equipped with 18 feet of special flexible 5/16 in. wire cable. Portable weighs only 23.9 lbs. 3 to 1 safety factor.
Hoists, winches & pullers working load limit: 4000 lbs., Hoists, winches & pullers size: 5.6-inch height x 5.6-inch width x 30.9-inch length, Type: Heavy duty, lines man, Standard lift: 20-inch maximum, 1 1/2 and 2 tons capacities available, Drop forged hooks with safety latches standard, Handle bends, before puller is dangerously loaded, acting as overload protection, Complies with ANSI/ASME B30.21 standards, Weight: 15.3 lbs.
Shop for Tools & Hardware at The Home Depot. The Maasdam 6000S uses only premium components. We produce the finest quality winch/puller available, backed by a full lifetime warranty - a first for domestic winches. Use for lifting construction material, moving, placing and installing heavy equipment, etc. Color: Metallics.
Shop for Tools & Hardware at The Home Depot. The EZ Winch CAL-3 is perfect for the non-professional. Easy to use and light weight. Frame is made of drop-forged steel and galvanized against rust. Some applications include pulling autos, tree removal, fencing, and other applications. Color: Metallics.
Stanley J4041 Proto Battery Cable and Small Bearing Puller Uses toggle-type action to grip onto all standard post battery terminals. Pulls small bearings and gears with 1-inch reach and spread. Protects bearing that are being pressed in shafts that are not center drilled.
Capacity: 2 ton Cable legth: 12 ft Cable lift: 6 ft Cable diameter: 3/16" Used for a wide range of lifting, lowering, stretching and pulling applications Galvanized aircraft quality cable Double locking drive pawls Drop forged steel frame galvanized against rust Forged steel hooks with OSHA recommended safety latches Oversized steel safety guard Stainless steel springs Automatic let-down with safety catch Cable guide guards against excessive wear 2 year limited warranty
Heavy duty lines man cable puller designed to lift lower stretch or pull heavy loadsCapacity 1 1/2 tonDrop forged hooksHandle bends before puller is dangerously loadedComplies with ANSI/ASME B30.21 standardsNet weight 14.11-LbsGross weight 16.05-LbsMaximum lift height 30-in
Shop for Tools & Hardware at The Home Depot. The EZ Winch CAL-4 is perfect for the non-professional. Easy to use and light weight. Frame is made of drop-forged steel and galvanized against rust. Some applications include pulling autos, tree removal, fencing, and other applications. Color: Metallics.
Vestil galvanized 2 speed cable puller. Great for use in horizontal pulling applications such as positioning equipment, stringing lines and emergencies. Can be used in both single and double-line pulling applications. Handle ratchets to take-up cable. When handle is rotated all the way back, the cable reel will free-wheel. Handle length is 30-inches. Minimum headroom is 24-inches. Single-line cable length is 1/4-inches by 120-inches (Cable length is 60-inches when used double-line). Not for use in vertical
Hoists, winches & pullers operating type: Ratchet, Type: Industrial hand, Standard lift: 20 Feet, Pulling force: 8000 lbs. double line, Material: Ductile iron frame, Dead lift weight capacity: 4000 lbs. Double Line, Cable/Wire Size: 5/16-inch x 20 Feet (Single Line), Weight: 23.7 lbs.
2 Ton Cable Winch PullerEasily control 4000 lb. of pulling power with this ratcheting cable winch pullerHeavy duty ratcheting cable winch puller is designed for single or double line operation. Use for everything from light vehicle recovery to heavy material handling and auto bodywork. Two-wheel ratcheting gearboxAircraft grade cable: 10 ft. x 3/16 in.Heat treated steel frameHook assembly is easily removed to attach accessoriesHeavy duty steel safety hooksSingle or double lineSnatch block for more pulling
Pow'R-Pull, 4 Ton Professional Grade Cable Puller, 6' Lift, 1 Piece Aluminum Alloy Ratchet Wheel, High Strength, Electro-Plated Steel Parts, Galvanized 5/16" Aircraft Cable, Notch At A Time Let Down, Drop Forged Steel Slip Hooks, Permanent, Non-Slip Plastic Grip & Compound Leverage.
2 Ton, Galvanized Cable Puller, Air-Craft Quality Cable, Double Locking Drive Pawls, Drop Forged Steel Frame, Forged Steel Hooks With OSHA Recommended Safety Latches, Over Sized Steel Safety Guard, Reliable Stainless Steel Springs, Automatic Let Down With Safety Catch, Cable Guide Guards Against Excessive Wear, Suggested Applications, Lifting Materials & Fixtures, Stretching Fence & Wire, Securing Tent Structures, Squaring Wood/Metal Framing, 2 Ton Maximum Lift, 6' x 3/16" Cable Diameter.
Item# 152910 Item# 152911 Load Capacity (tons) Cable Length (ft.) Cable Diameter (in . ) 4 .5mm 6mm 9 /32 1 1/4
Cable Puller, 2-5/8 Ft., Breaking Strength 5000 Lb., Length 26 In., Width 2.375 In., Forged Hook Type, Silver, Heavy Duty Double Ratchet And Pawl, Non-slip Rubber Grip Handle, Includes Drop Forged Hooks, Heavy Duty Ratchet And Pawl
The Safest Most Dependable Cable Puller AvailableMake hauling and securing heavy loads a little easier with this 1Ton Cable Puller. Galvanized aircraftquality cable is virtually indestructible .Onepiece aluminumalloy ratchet wheels resist wear and last longer than laminated wheels. Electroplated parts protect against rust. Dropforged steel slip hooks rotate a full 360. Notchatatime letdown makes for troublefree positivecontrol lowering and releasing. Made in the USA.1Ton Cable Puller is the original.
12' Pull 1 Ton Cable Puller 1 ton capacity, 2:1 safety factor for stretching, pulling or bracing/lift up to 1/2 ton capacity 4:1 safety factor. Automatic notch-at-a-time control. Galvanized aircraft cable, plated steel frame/steel parts. Made in USA. PROFESSIONAL GRADE ` `POWER -PULL ' ' 12 ' Pull Cable Diameter Inche3/16 Unit: each Unit Weight: 6.1300 lbs UPC Code: 036683181248 Back to Top Related Products
Maasdam Come-A-Long Cable Power Puller 12' MAASDAM COME-A-LONG CABLE POWER PULLER *Capacity: 1 ton *Cable legth: 12 ft *Cable lift: 12 ft *Cable diameter: 3/16 *Used for a wide range of lifting, lowering, stretching and pulling applications *Galvanized aircraft quality cable *Double locking drive pawls *Drop forged steel frame galvanized against rust *Forged steel hooks with OSHA recommended safety latches *Oversized steel safety guard *Stainless steel springs *Automatic let-down with safety ca
Cable Puller | Brand: Tuf-Tug® | Product Type: Cable Hoist/Puller | Cable Diameter: 9/32 in. | Single Line Load Capacity: 1-1/4 Ton | Double Line Load Capacity: 2-1/2 Tons | Single Line Lift Height: 20 ft.
Cable limiter which keeps 2 wraps of cable on the ratchet wheel2 ton double ratchet drive5 year warrantyMeets or exceeds ASME and OSHA specs. Most Other Specialty Tools products are available for in-store pickup from Advance Auto Parts.
Shop for Tools & Hardware at The Home Depot. The Big Red 4-Ton Come-Along Cable Puller with 3 Hooks is constructed of heavy-duty steel and features powerful hand-crank ratchet action and an automatic notch-at-a-time let-down release. The cable puller is great for use in workshops, on farms and ranches, for construction, for home projects and for automotive use.
EZ puller cable puller is able to pull 1 ton of cable. It is compliant with Canadian regulations and comes with 1 pack per box. It is both efficient as well as durable.
Maasdam Pow'R-Pull CAL-3 3-ton Cable Puller- Import Part# 453-CAL-3 Power Pull Hoists 3 Ton FEATURES Drop -forged steel slip hooks with OSHA recommended safety latches Heavy gauge steel, reinforced ratchet guard Import consumer grade Interlocking, precision fit, steel alloy pawls with safety spacer sleeve Permanent, comfortable, non-slip grip Precision-cast aluminum alloy ratchet wheel - one piece construction Trouble free, “Notch-At-A-Time” letdown Wt. Cap.: 3 tons Lifting Height/Take-Up: 12.00 ft
Ratchet Puller, Lifting Capacity 1700/3400 lb., Pull Capacity 3400/6800 lb., Cable Length 20/10 ft., Min. Between Hooks 17 to 22 In., Cable Dia. 1/4 In., Handle Length 201/2 In., Hook Opening 7/8 In., Ratchet Positive Locking
Jet 181420 JCH-4, 2 Ton Capacity 20 ft. JCH Series Heavy-Duty Lines Man Cable Puller