- Refine >
- About these results
BKIN1072 Features: Ball valve Low lead Full port ball valve For hot and cold water distribution applications, potable water applications and radiant heat applications 600 PSI non shock WOG -20° F to 300° F temperature range Corrosion and rust resistant Superior flow rate Pex connection Requires no glue, solvents or solders Dimensions: Overall dimensions: 2.5" H x 1.5" W x 4" D
SPK1468 Features: Stay - open ball valve with triangular pull handle Stay open ball valve, 1.5'' female inlet, 1.5'' female outlet, vertical installation
1/2" Female Iron Pipe x 3/4 " Hose Thread, Sillcock Ball Valve, No Kink Hose Bibb, 1/4 Turn Either Right Or Left.
2" FPT x 2" FPT Schedule 80 140 Deg. F max 150 PSI max working pressure Full port Chemical resistant EPDM seal ASTM, ANSI, NSF, IAPMO approved Blue ABS handle
PVC true-union ball valve with both solvent and threaded ends. Ball valve has dual o-ring stem design. May be installed on Sch. 40 or 80 PVC pipe.
Uponor, formerly known as Wirsbo, is a leading manufacturer and supplier of Plumbing, Heating/Cooling, and Firs Safety Systems for residential and commercial building applications.Use the Uponor ProPEX Leadfree Brass Ball Valve for all plumbing and radiant heating applications. Both ends are manufactured with the ProPEX Fitting for connections to AquaPEX tubing or HePEX tubing. These valves are not compatible with applications using glycol.
This listing is for one 2" thread x thread PVC ball valve. (although pictured is a slip x slip style)Works great for fresh and saltwater.This is one of the highest quality ball valves available. Buy with confidence!
Standard port bronze-ball valve, NPT. Made in the USA. ANSI/NSF 61-8.
This listing is for one 1.5" PVC true union ball valve. This ball valve comes with both slip and threaded inserts (2 of each).Everything pictured is included. This is one of the highest quality true union ball valves available. Buy with confidence!
Perko Seacock Ball Valve Design Design; 3/4'' Hose; 1/4'' Flange; 5 7/8'' H; 5/16 Bolt . Perko Seacocks Incorporate a Polymer Ball and Seat Assuring a Tight Seal and Ease of Operation; and Drain Plugs for Winterizing. Handles are Easily Removed. Cast Bronze 90 Curved Hose Adapter Includes: Thru-Hull Hose Adapter Drain Plug Four Pre-Drilled Mounting Holes and Bonding Screw
This Dixon FBVG75 ball valve is made of forged brass for higher corrosion resistance than steel and has a plastic-covered lever handle for on/off manual control. This inline valve has a full port flow for higher operating efficiency than standard port and 3/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction. It is pressure rated to 600 pounds per square inch (psi) at a maximum operating temperature of 248 degrees F. This full port ball valve is
Watts, 0393315, Ball Valves,N/A, B6001, Valves, 2-1/2 Inch B6001 2-1/2" 2-Piece Ball Valve with Sweat ConnectionsSeries B6001 2-Piece, standard port, bronze ball valves feature a blowout proof pressure retaining stem. The B6001s standard port orifice ensures minimal pressure drop, while Durafill seats and chrome plated brass ball provide lasting service for a wide range of liquids and gases.Watts 0393315 Features:Durafill (carbon/glass filled PTFE) seats for lasting service for a wide range of liquids and
Ball valve- Low lead- With lever-75'' SKU: JNSN29068
Apollo General Purpose Standard Port Ball Valves are the most widely used general purpose ball valves in the industry. They are made and 100 percent factory tested in the USA. Trusted performance with a wide range of options.
Uponor, formerly known as Wirsbo, is a leading manufacturer and supplier of Plumbing, Heating/Cooling, and Firs Safety Systems for residential and commercial building applications.Use the Uponor ProPEX Lead-free Brass Ball Valve for all plumbing and radiant heating applications. Both ends are...
Product Features: Manufactured and assembled in the United States of America Constructed of solid brass High quality chrome plated finish – finishes are covered under warranty for a year Single handle operation Full flow classic laboratory needle spout outlet All hardware required for faucet installation is included Product Specifications: Overall Height: 1-7/8" (measured from mounting surface to highest point) Rated Operating Pressure: 0-0.5 PSI Rated Operating Temperature: 40-140 - degrees Fahrenheit
3/4" Male Iron Pipe x 3/4" Hose Thread, No Kink Ball Valve, Hose Bibb, 1/4 Turn Either Right Or Left.
Watts, 0750210, Ball Valves,N/A, WBV-3, Valves, 3 Inch WBV-3 3" Standard Port Brass Ball Valve with Threaded FIP ConnectionsSeries WBV-3 2-Piece, standard port, brass ball valves feature a bottom loaded blowout proof stem, virgin PTFE seats and stem packing and an adjustable stem packing nut.Watts 0750210 Features:Suitable for a full range of liquids and gasesBottom loaded blowout proof stemVirgin PTFE stem packing sealAdjustable stem packing glandVinyl insulator on heavy duty zinc plated carbon steel
Red Handle size: 5.3 - 7 /2" Material: Polypropylene Size: 3 /4"(H) x 3. "(W) Flash point: 330 deg C Lock hole: 0.32" (Dia), fits pipe size 3/8" to /4" Temperature range: -50 deg to 360 deg F Dielectric constant: 2.3 to 2.4 Fully dielectric, injection molding, good low-temperature resistance, safely, efficiently, inexpensively Resistant to extreme temperature changes Highly resistant to cracking, abrasion, solvents and other chemical products Only ball valve lock that allows to lock valves in either the
For application where space is limited and double unions are not required. Includes shut off valve and union on one side for quick disconnect.
Ball valve Low lead Full port ball valve For hot and cold water distribution applications, potable water applications and radiant heat applications 600 PSI non shock WOG -20 F to 300 F temperature range Corrosion and rust resistant Superior flow rate Pex connection Requires no glue, solvents or solders
"Product Features:Constructed of PVC ensuring durability and dependabilityCovered under ProFlo s 1 year limited warrantyHigh quality finish Â will resist rust and corrosion through everyday useConnection Size: 2-1/2""Connection Type: Slip x Slip"
The Apollo 70-900 series bronze two-piece inline 3-port diverting ball valve has a lever handle and solder ends on all ends. The valve body is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. Reinforced polytetrafluoroethyl (RPTFE) seats and stem packing reduce the risk of leakage. The valve is standard (or regular) port for reduced valve size and cost. It has solder ends for a strong and
1" C x C (sweat) Chrome plated brass ball and stem Rated to 600 PSI -20 to 300 degrees F Full port For water, oil and air Blowout proof stem design Packing gland allows for repacking/adjusting of seal on valve stem should it leak PTFE ball seat and packing Heavy duty rust resistant handle with vinyl grip Lead free compliant This product contains less than 0.25% weighted average lead content on wetted surfaces NSF certified