arbor press

Dayton Press,Arbor - 3ZM98

Dayton Press,Arbor - 3ZM98

Mead Ton Dbl-actng,arbor Air Press & Control Pkg.

Presses Hydraulic Mechanical - Fabrication Machine Type: Pneumatic Pressure: 3/4 Air Connector Size: 1/2

Panavise Arbor Press, Pana- press, 8" Arm, 7" Height

PanaPress - Model 502 Precision ground ram is 3/4" x 3/4" (19.1mm x 19.1mm) and 5 7/8" (149.2mm) long. hole in ram? Four adjustable nylon gibs provide exceptional ram control. Lever arm is 8" (203.2mm) long. Base footprint is 3.7" (94mm) x 7" (177.8mm) Holes 1/4" (6.3mm), countersunk 7/16" (11.1mm) are located at all four corners for bolting to the work surface. Two additional holes are drilled in base plate and screws provided of XX size for attaching tooling or for attachment of 506 IDC Bench Assembly

4 MT to 33 JT Drill Chuck Arbor

For chucks with Jacobs taper backs. Determine both shank size (to fit into your Drill Press,tailstock, etc.) & chuck (Jacobs) taper to order the correct arbor. Morse Taper arbors have a tang end (Not available with a drawbar end.).

Air-Mite Device Inc. Arbor Air Punch Press (stroke 2")

Air-Mite Device Inc. Arbor Air Punch Press (stroke 2") Air-Mite Device Inc. $355.50 DAP 19 29967 Air-Mite Device Inc. DAP 19 Arbor Air Punch Press (stroke 2") Product Description Dimensions: 36 x 25 x 34 inches Weight: 178 pounds Shipping

Press,Arbor,4 Ton {Dayton 5Z077}

Press,Arbor,4 Ton {Dayton 5Z077} Press,Arbor,4 Ton {Dayton 5Z077} [5Z077] Shipping Weight: 188.00 lb Arbor Press, Force 4 Tons, Anvil Diameter Work Area 9 1/2 Inches, Maximum Working Height 15 3/4 Inches, Ram Dimension 1 3/4 x 1 3/4 Inches, Ram Hole Diameter x Depth 1/2 x 1 Inch, Range of Slot Width 3/4-2 3/4 Inches, Swing 16.0 Inches, Table Working Surface 9 1/4 x 9 1/8 Inches, Base Size 9 1/4 x 21 1/4 Inches, Overall Height 29 3/8 Inches

Wilton 15-Inch Drill Press Floor Model, 115/230V 1PH, 1HP

It offers a greater range in spindle speeds than others in this class. Also features a larger quill which provides greater accuracy. And large production work table which gives the operator the room to work and support for the job. 3" column for head support, while the quill is also supported to lessen deflection. Standard Equipment includes a 1/2" Drill Chuck and Arbor, Manufacturer: WMH Tool Group

Drill Chuck Arbor - MT2/JT33

G1435 Drill Chuck Arbor - MT2/JT33 Used to adapt drill chucks to your drill press, milling machine or lathe. Long end: MT #2, Short end: J.T. #33. Description

Easily converts 4270 mag press arbor to accept 1/2 inch diameter 6 inch long drill bits Milwaukee 48-66-2125 1/2 inch Chuck Arbor Assembly

Arbor Presses Machine Type: Mechanical Pressure: 1 Palmgren

20" Drill Press (Shop Fox)

Details 20" Drill Press (Shop Fox) Description A radial drill press is one of the most versatile and handy types that you can add to your shop, and the Shop Fox, ruggedly constructed under strict quality control, fills the bill. Between the tilt of the head and tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add the 20-inch swing, and you have one of the best values available in a drill press. Other features are table T-slots, coolant channel,

Woodstock International M1039 20-Inch Drill Press

Drills Woodstock International M1039 20-Inch Drill Press #23101039 Product Description -Woodstock International M1039 The Woodstock International M1039 Drill Press comes with 12 speeds for versatility. You can adjust your speed to your material for optimum drilling. The M1039 has a built-in light for increased visibility so you can drill with accuracy. Features-Woodstock International M1039 Table T-slots and coolant channel Built-in light Includes-Woodstock International M1039 M1039 20" Drill Press

Champion Cutting Tool AC35 RotoBrute Economy Portable Magnetic Drill Press

2200-Pound Magnetic Strength, High Torque 1200-Watt Motor and 600-Pound No-Load Speed Quick Release Arbor Enables Cutter Change in Seconds 1-3/8-Inch Diameter by 2-Inch Depth Capacity, 6-1/2-Inch vertical travel Cuts Ferrous and Non-Ferrous Metals Application examples include: Steel fabrication, Bridge and highway maintenance, truck and trailer manufacturing, Construction sites, Mining, ship building, refineries, welding, etc., Manufacturer: Champion Cutting Tool

Flange stop prevents over-drilling. Quick-change arbor system allows cutter head changes with a simple push-on turn.

645-2 Hole Saw List Price: $122.68 You Save: $20.45 DrillSpot Price: $102.23 Hole Cutters and Accessories Teeth cut stainless steel, mild steel, aluminum, copper, and brass. Flange stop prevents over-drilling. Quick-change arbor system allows cutter head changes with a simple push-on turn. Hole Saw, Tungsten Carbide, Saw Dia 2 In, Tungsten Carbide Grains Bonded To Hardened Steel Backer, Max Cutting Depth 3/16 In, Arbor Hole 3/8 In, For Stainless Steel, Mild Steel, Copper, Aluminum And Brass Item Hole Saw

Accessories - Fabrication Type: 1-1/4 Square Arbor Press Stop For Use With: Most Arbor Presses

Item #48691414 $20.43 ea Description: Accessories - Fabrication Type: 1-1/4 Square Arbor Press Stop For Use With: Most Arbor Presses 1-1/4 Square Arbor Press Stop Most Arbor Presses

Norco 78110C 100 Ton Electro/Hydraulic Press - Made in USA

Norco 78110C 100 Ton Electro/Hydraulic Press - Made in USA Norco 78110C 100 Ton Electro/Hydraulic Press - Made in USA List Price: $14,307.69 Price: $8,579.00 Savings Amount: $5,728.69 Item#: NOR78110C 78110C Norco 78110C 100 Ton Electro/Hydraulic Shop Press ARBOR PLATES NOT INCLUDED Intended Use: Heavy duty use in truck garages and industrial work shops. Safety oil by-pass and overload systems protect power unit. Hand operated winch raises and lowers press bed. Liquid filled gauge measures ram force in

10" & 15" Drill Presses

Jet 354400 J-2500 15" Floor Model Drill Press, 3/4 HP, 115V Cast iron head Large quill allows greater accuracy Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life. Table tilts 45 degrees Large ground steel column diameter for maximum head and table support Hinged metal belt and pulley cover Accurate depth stop displays inch/mm and has quick set bolt for fast, accurate adjustments 5/8" drill chuck and

Arbor 5/8 -18

Arbor 5/8 -18 ALL10405 $19.36 Save Time when fabricating roll cages. Notchers render precise joints for more consistent welds and stronger cages. Available in deluxe aluminum or economy steel versions, notchers accept up to 2" diameter stock and automatically align and center tubing. Use in a drill press or with hand drill Notchers adjust up to 45 deg.

Drill Chuck Arbor MT3/JT4

H6206 Drill Chuck Arbor MT3/JT4 Description Used to adapt drill chucks to your drill press, milling machine or lathe Specifications: MT #3 JT #4

Rong Fu RF-401VS Drill Press, w/ Avail Power Feed

>> Rong Fu RF-401VS Drill Press, w/ Avail Power Feed Drill Press RONG FU DRILL PRESS MODEL # RF-401VS For Spindle Power Feed, please refer to Option below Column dia. - 4.5" Tapping cap. in cast iron - 5/8" Approx. dimensions - 30L x 38W x 77"H Approx. weight - 650 lbs Available in 1.5 HP 110/220 v 1 ph. or 220/440 v 3 ph. Infinitely variable spindle speeds Forward/reverse switch Cutter arbor Specifications: RF-401VS Drilling cap. in cast iron 1.25" Drills to center 20" Quill dia. 3" Quill travel 6.7"