-
Champion XL200-1-1/16 RotoBrute 1-1/16" HSS Annular Cutter, 2" Depth
Recommended for materials with a brinell harness number up to 275. Cut clean, bur free holes Precision pilot pins eject the center as a plug of steel Cuts cast iron, steel and ultra hard or exotic alloys Application use must be with Magnetic or stationary drill presses., Manufacturer: Champion Cutting Tool
$63.52Find more:
-
49-59-1937 1-15/16'' x 1 HSS Annular Cutter
milwaukee 49 59 1937 1 15/16 x 1 Annular Cutter HSS Milwaukee 49 59 1937 Specifications: Diameter: 3/4 Hole Depth: 1 Milwaukee 49 59 1937 Features: Unique tooth geometry allows for better centering and faster cutting Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling Shorter flute design allows for chips to fall freely from cutter Ejector pins can be used on all diameters ejector pin sold seperately Ejector pin extends 1/2 beyond tooth tip allows
$127.44Find more:
-
Milwaukee 49-59-0562 9/16"" HSS Annular Cutter"
"Milwaukee 49-59-0562 9/16"" HSS Annular Cutter. 3/4"" diameter shank. Unique tooth geometry allows for better centering and faster cutting. Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling. Ejector pins can be used on all diameters (sold separately). Ejector pin extends 1/2"" beyond tooth tip, allowing for easier and faster location of pin on hole. Shorter flute design allows chips to fall freely from cutter. Fits directly into Milwaukee's
$19.99 -
Milwaukee 49-59-2069 11/16"" HSS Annular Cutter"
"Milwaukee 49-59-2069 11/16"" HSS Annular Cutter. High Speed Steel Composition - Faster cutting and more durable. Unique Tooth Geometry - Faster penetration with faster chip ejection. Thin Wall Construction - Thin wall promotes ease of going through material. Weldon Shank - Allows use in just about all small magnetic drill presses"
$34.99 -
Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter
1-3/16" x 1" HSS Annular Cutter Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter Features Incorporates the industry standard shank diameter of 3/4" The original tooth geometry is designed to perform cuts faster while also allowing for better centering The thin wall design aids in the cutters speed and efficiency by removing less material during the drilling process The shorter flute design allows for removed debris to fall freely away from the cutter
$42.99 -
Milwaukee 49-59-2131 - 1-5/16" HSS Annular Cutter
Milwaukee 49-59-2131 - 1-5/16" HSS Annular Cutter MW49-59-2131 Milwaukee 49-59-2131 - 1-5/16" HSS Annular Cutter Milwaukee 49-59-2131, 1-5/16" HSS Annular Cutter has a full 2 inch cutting depth 3/4" Diameter Shank - Industry standard Unique Tooth Geometry - Allows for better centering and faster cutting Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling Ejector Pins can be used on all diameters (44-60-1720 for 1" depth and 44-60-1721 for 2"
$108.00eTools-r-UsFind more:
-
Milwaukee 49-59-2194 2" x 1-15/16" HSS Annular Cutter
Milwaukee 49-59-2194 2" x 1-15/16" HSS Annular Cutter The high speed steel cutter has shorter flute design which allows for chips to fall freely from cutter An unique tooth geometry allows for better centering and faster cutting Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling 2" Cutting Depth 1-15/16" Diameter Milwaukee 49-59-2194 Accessories
$199.99Toolsforless.com -
Milwaukee 49-59-1062 ANNULAR CUTTER 1-1/16" STAINLESS STEEL
Milwaukee Tool 49-59-1062 ANNULAR CUTTER 1-1/16" HSS
$46.62Find more:
-
Milwaukee 49-59-2119 - 1-3/16" HSS Annular Cutter
Milwaukee 49-59-2119 - 1-3/16" HSS Annular Cutter MW49-59-2119 Milwaukee 49-59-2119 - 1-3/16" HSS Annular Cutter Milwaukee 49-59-2119, 1-3/16" HSS Annular Cutter has a full 2 inch cutting depth 3/4" Diameter Shank - Industry standard Unique Tooth Geometry - Allows for better centering and faster cutting Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling Ejector Pins can be used on all diameters (44-60-1720 for 1" depth and 44-60-1721 for 2"
$100.00eTools-r-UsFind more:
-
49-59-2056 9/16" x 2" HSS Annular Cutters
Rating Details Milwaukee 49-59-2056 Features: 3/4" Diameter shank - Industry standard Unique tooth geometry - Allows for better centering and faster cutting Thin wall design - Enables cutters to cut faster and more efficiently by removing less material during drilling Milwaukee 49-59-2056 Specifications: Diameter: 9/16" Cut Depth: 2" Material: HS Steel Milwaukee 49-59-2056 Includes:
$3.57Find more:
-
Milwaukee 49-59-2181 2" x 1-13/16" HSS Annular Cutter
Milwaukee 49-59-2181 2" x 1-13/16" HSS Annular Cutter The high speed steel cutter has shorter flute design which allows for chips to fall freely from cutter An unique tooth geometry allows for better centering and faster cutting Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling 2" Cutting Depth 1-13/16" Diameter Milwaukee 49-59-2181 Accessories
$175.99Toolsforless.com -
Milwaukee 49-59-2144 - 1-7/16" HSS Annular Cutter
Milwaukee 49-59-2144 - 1-7/16" HSS Annular Cutter MW49-59-2144 Milwaukee 49-59-2144 - 1-7/16" HSS Annular Cutter Milwaukee 49-59-2144, 1-7/16" HSS Annular Cutter has a full 2 inch cutting depth 3/4" Diameter Shank - Industry standard Unique Tooth Geometry - Allows for better centering and faster cutting Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling Ejector Pins can be used on all diameters (44-60-1720 for 1" depth and 44-60-1721 for 2"
$129.00eTools-r-UsFind more:
-
49-59-0812 13/16" x 1" HSS Annular Cutter
Rating Details Milwaukee 49-59-0812 Features: 3/4" Diameter shank - Industry standard Unique tooth geometry - Allows for better centering and faster cutting Thin wall design - Enables cutters to cut faster and more efficiently by removing less material during drilling Milwaukee 49-59-0812 Specifications: Diameter: 13/16" Cut Depth: 1" Material: HS Steel Milwaukee 49-59-0812 Includes:
$3.47Find more:
-
HSS Annular Hole-Cutter 1-5/16" Dia 1" Depth Of Cut
HSS Annular Hole-Cutter1-5/16" Dia1" Depth Of Cut
$8.00DrillsAndCutters.comFind more:
-
Milwaukee 49-59-2094 15/16"" HSS Annular Cutter"
"Milwaukee 49-59-2094 15/16"" HSS Annular Cutter. High Speed Steel Composition - Faster cutting and more durable. Unique Tooth Geometry - Faster penetration with faster chip ejection. Thin Wall Construction - Thin wall promotes ease of going through material. Weldon Shank - Allows use in just about all small magnetic drill presses"
$39.99 -
Milwaukee 49-59-2156 2" x 1-9/16" HSS Annular Cutter
Milwaukee 49-59-2156 2" x 1-9/16" HSS Annular Cutter The high speed steel cutter has shorter flute design which allows for chips to fall freely from cutter An unique tooth geometry allows for better centering and faster cutting Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling 2" Cutting Depth 1-9/16" Diameter Milwaukee 49-59-2156 Accessories
$139.99Toolsforless.comFind more:
-
Milwaukee 49-59-2106 - 1-1/16" HSS Annular Cutter
Milwaukee 49-59-2106 - 1-1/16" HSS Annular Cutter MW49-59-2106 Milwaukee 49-59-2106 - 1-1/16" HSS Annular Cutter Milwaukee 49-59-2106, 1-1/16" HSS Annular Cutter has a full 2 inch cutting depth 3/4" Diameter Shank - Industry standard Unique Tooth Geometry - Allows for better centering and faster cutting Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling Ejector Pins can be used on all diameters (44-60-1720 for 1" depth and 44-60-1721 for 2"
$82.89eTools-r-UsFind more:
-
49-59-2094 15/16" x 2" HSS Annular Cutters
Rating Details Milwaukee 49-59-2094 Features: 3/4" Diameter shank - Industry standard Unique tooth geometry - Allows for better centering and faster cutting Thin wall design - Enables cutters to cut faster and more efficiently by removing less material during drilling Milwaukee 49-59-2094 Specifications: Diameter: 15/16" Cut Depth: 2" Material: HS Steel Milwaukee 49-59-2094 Includes:
$5.59Find more:
-
Milwaukee 49-59-2081 13/16"" HSS Annular Cutter"
"Milwaukee 49-59-2081 13/16"" HSS Annular Cutter. High Speed Steel Composition - Faster cutting and more durable. Unique Tooth Geometry - Faster penetration with faster chip ejection. Thin Wall Construction - Thin wall promotes ease of going through material. Weldon Shank - Allows use in just about all small magnetic drill presses"
$39.99Find more:
-
Milwaukee 49-59-0687 11/16"" HSS Annular Cutter"
"Milwaukee 49-59-0687 11/16"" HSS Annular Cutter. 3/4"" diameter shank. Unique tooth geometry allows for better centering and faster cutting. Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling. Ejector pins can be used on all diameters (sold separately). Ejector pin extends 1/2"" beyond tooth tip, allowing for easier and faster location of pin on hole. Shorter flute design allows chips to fall freely from cutter. Fits directly into Milwaukee's
$24.99Find more:
sponsored links
-
Purchase Annular Cutters Here
7/16 - 3" HSS/Cobalt/Armor Plated. Discounted / Buy now - Ship today.
www.msdiscount.com -
Annular Cutter
Looking for Annular Cutter? Find exactly what you want today.
www.eBay.com -
Portable Magnetic Drilling Machines
Electric, Pneumatic & Hydraulic Drills Annular Cutters & more.
www.csunitec.com -
Buy Drill Bits Online or Phone
1000's of bits, for steel, wood, concrete, masonry, glass, Specials.
www.buydrillbits.com
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
