- Refine By >
Stanley J49532S2 Proto 5/32-inch Roll Pin Punch One-piece design for strength and durability. Reverse taper to help prevent binding. Made from S2 steel and specially heat-treated for greater strength and durability. Modified parabolic striking end to help reduce mushrooming and chipping. Black oxide finish to help prevent rust corrosion; extending tool life and performance. A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
The Klein 4PPL04 Pin Punch - Long - 5/32'' is used for driving out and removing pins and keys. The shaft of this tough and resilient punch is made from quality tool steel and is heat treated for added durability and strength. This tool has a knurled handle to make for easy gripping, and a soft head that will mushroom rather than chip. Klein Tools takes pride in the fact that the majority of their products are manufactured in the U.S. and have been committed to providing their customers with the highest
Extra Long Full Finish Pin Punch 5/32in. x 5/16in.
Drive pin punch set- Precision engineered and machined for an exact fit- 8 piece set includes 1/16", 3/32", -13", 5/32", 3/16", 7/32", -25", 5/16" punches and plastic case- Hardened tool steel with knurled body- Carded- Length: 5-25- Width: 0-63- Height: 5-13 SKU: JNSN38487
Drive pin punch set- Precision engineered and machined for an exact fit- 8 piece set includes 1/16'', 3/32'', -13'', 5/32'', 3/16'', 7/32'', -25'', 5/16'' punches and plastic case- Hardened tool steel with knurled body- Carded- Length: 5-25- Width: 0-63- Height: 5-13 SKU: JNSN38487
Tough, hardened steel drive pin punches with knurled gripping area for sure-handed use. Each punch is deep-stamped with its size. Black oxide finish to resist rust.
Stubborn Pins, bolts, rivets and other items are not so hard to reach with this pin punch. Removing stubborn pins, bolts, rivets and other items has become easier than ever before. These items will be a breeze with this Craftsman pin punch which features a chrome vanadium steel blade that is heat treated to ensure long lasting strength and durability. The punch also features a black oxide finish which ensures a corrosion resistant tool. All Craftsman Chisels and Punches can be used with the punch and chisel
Add our Store to your Favorites and receive our email newsletters about new items and special promotions! General Interest Dasco 0583-0 Pin Punch-5/32" PIN PUNCH Please note that pictures shown above may or may not differ from actual product images (for reference only). SKU: 304101 Mfg #: 0583-0 Manufacturer: Dasco Please note: We may have a lot more quantity available. If you need more of this item than we have listed here, please contact us through eBay . 5/32" PIN PUNCH PAYMENT SHIPPING RETU
DIAMETER: 5/32 ". Weight (lb) : 0.07. QUANTITY YOU WILL RECEIVE:(priced for) : 1
Punch edge is hardened to 48-60 HRC and is ground precisely for efficient punching and durability- One-piece construction forged from chrome vanadium steel for strength and durability- Powder coated finish for durability- Yellow high-visibility finish- Striking edge hardened to 42 HRC and has chamfered edges to help resist chipping- Size marking on shank allows for easy identification of the tool- 6 piece set contains one 16-230 - 1/16'' x 6'', one 16-231 - -13'' x 6'', one 16-232 - 5/32'' x 6'', one 16-233
Designed to apply consistent pressure to the end of a pin, driving a straight through the hole. The ball centered on the punch tip assures proper contact, eliminating damage to the pin or hole wall.
Features and Benefits: Full finish Knurled handle to to provide a grip for fingers Made of S2 stainless steel All included in a handy storage carrying case Made in the USAThese pin punches are shaped like a thin rod, with knurled handles. Used for driving out and removing already loosened pins and keys after initial movement by a solid punch. This set includes the following sizes: 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", and 7/16".
This CRL Stanley® 5/32" x 6" Pin Punch is used for drilling holes. The one-piece construction is forged from tempered tool steel for strength and hardened for long life. Powder coated for increased visibility in your tool box. Minimum order is one each.
K Tool International KTI72913 K Tool International KTI72913 Pin Punch .15625 Inch Description K-Tool International (KTI) designs develops and manufactures over 3 000 hand tools specialty tools and accessory items as well as related specialty equipment. KTI interacts closely with its customers and continuously expands its offerings to meet the changes of a dynamic marketplace. 5/32 Inch Pin Punch. SKU: WTD12328 Payment We accept payment via PayPal, Mastercard, Visa, American Express, Discover an
4\" LONG 5/32'' DIAMETER BRASS DRIVE PIN PUNCH
Shop for Hand Tools at The Home Depot. 12 piece Pilot Punch Set (Comes in an attractive wooden box.) The ball on the center of the point end assures proper contact with the pin eliminating damage to the pin or hole wall. Made of high-quality alloy heat treated for strength and toughness. 12-pieces including: #1-1/16 in. , #2-5/64 in. , #3-3/32 in. , #4-1/8 in. , #5-5/32 in. , #6-3/16 in. , #7-7/32 in. , #8-1/4 in. #9-5/16 in., #10-3/8 in., #11-7/16 in., #12-1/2 in. Punches designed to apply equal pressure
Extra Long Full Finish Pin Punch 5/32in. x 5/16in.Features and Benefits: Full finishFor driving out and removing already loosened pins and keys after initial movement by a solid punch
Roll Pin Punch, Tip Size 5/32 In, Hex 5/16 In, Length 5 1/4 In, 1-piece Design, Chrome Vanadium Steel With Black Oxide Finish Construction
GN75D Features: -Product Type:Punches. Dimensions: -Overall Product Weight:0.01
Pin Punches: 3/32", 1/8", 5/32", 3/16", 1/4"Taper Punches: 3/32", 1/8", 5/32", 3/16", 1/4"Chisels: 3/8", 1/2", 5/8"Center Punches: 1/8", 3/16"All included in a kit bag. Most Cutting & Drilling Tools products are available for in-store pickup from Advance Auto Parts.
Armstrong Industrial Hand Tools have a heritage of Made in the USA since four brothers founded the company in 1890. This Armstrong brand punch/chisel is created from premium material ensuring unequalled strength, toughness, and durability.Product Name : Tool Steel Long Pin Punches; Point Diameter (Inch ) : 5/32; Stock Size (Inch ) : 5/16; Overall Length (Inch ) : 8.000; US Federal Specification (Inch ) : GGG-P-831F; ASME Specification (Inch ) : B107.48m; Material (Inch ) : Tool Steel; Finish (Inch ) : Black
Shop for Hand Tools at The Home Depot. Proudly manufactured in Australia and built for strength and reliability. This pin punch is used for driving out and removing pins and keys. Also features a tough and resilient shaft made from quality tool steel.
Center punches are used for piercing or marking for staring drills in metal and other materials Cold chisels are used for cutting Shaping and removing metal softer than the cutting edge of the chisel Pin points are used for driving out and removing already loosened pins and keys after initial movement by a solid punch Line-up punches are used for aligning holes in metal pieces through which rivets or bolts are inserted Made in the USAThis 14 piece punch and chisel set includes the following: Cold chisel