The Lincoln Electric Outback 185 Welder/Generator is built for the outdoors and is a great choice for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone needing portable DC stick welding and AC generator power. It...
Shop for Welding & Soldering at The Home Depot. Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000-watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
Welder/ Generator, Bulldog 5500, Rated Output CC/AC 125A AC/ 20V/ 30 Percent 100A AC/ 25V/ 60 Percent, Amperage Range 70 140, OCV Max. OCV At 3750 RPM 66V RMS, Engine Brand Kohler, Start Type Recoil, Height 25.6 In., Width 21.8 In., Depth 31.5 In.
This Lincoln Outback 145 Generator/Welder is an ideal choice for a wide variety of applications, including service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone who needs portable DC stick welding capability and AC...
LCL1028Features Product Type: Welder generator Product Type: Mig welders Product Type: Engine driven Output Amperage:250 Contact Tips Included: Yes Dimensions Overall Height - Top to Bottom:36.2 Overall Width - Side to Side:21.5 Overall Depth - Front to Back:42.3 Overall Product Weight:518
Welder Generators, Rated Output CC/DC 225A / 25V / 40, 210A / 25V / 100, Amperage Range 50225A, OCV 80, 60 Hz Phase, Auxiliary Power 9.0 kW And 10.5 kW Surge 1 Phase, Start Type Electric, Height 29.9 In, Width 21.5 In, Depth 42.3 In, 23 HP Kohler Gasoline Engine, 12 Gallon Fuel Tank, Totally Enclosed Case, 76.4 dBA sound level at 23 ft
Shop for Welding & Soldering at The Home Depot. Get a 500 amp welder in a compact case.The same size as the Vantage 300 and 400A turbo-charged diesel engine with Lincoln Electric Chopper Technology makes this a reality. Also, less weight than traditional 500 amp welders makes the Vantage 500 compact design a great choice for installation on truck beds where available space and weight capacity are limited.
K240x - x Features: -LINCOLN SUPERGLIDE S6.-Consistent weld deposit chemistry and procedures from package to package improve quality and save time. Fluid puddle, good wash-in at weld toes and flat weld beads minimize defects, scrap or re-work. Low feed forces reduce wear and tear on gun liners and contact tips..-Always use in accordance with the Material Safety Data Sheet (MSDS).-UNSPC CODE: 23271813.-Product Type: Engine driven; Mig welders; Welder generator.-Output Amperage: 500.-Contact Tips Included:
Shop for Welding & Soldering at The Home Depot. The Lincoln Electric Ranger 225 Engine-Driven Welder offers versatile DC welding with a smooth welding output for a broad range of stick electrode types. It delivers up to 10,500 watts of peak AC generator power with its 23 HP Kohler gasoline engine with outputs rated up to 104 degrees Fahrenheit. The large, 12-gallon fuel tank helps extend run times.
Welder Generators, Rated Output CC/DC 225A DC CC/25V/40, Rated Output CV/DC 200A DC CV/20V/100, Amperage Range 50225A, OCV 80, 60 Hz Phase, Auxiliary Power 9.0 kW And 10.5 kW Surge 1 Phase, Start Type Electric, Height 29.9 In, Width 21.5 In, Depth 42.3 In, 23 HP Kohler Gasoline Engine, 12 Gallon Fuel Tank, Totally Enclosed Case, 76.4 dBA sound level at 23 ft
Shop for Welding & Soldering at The Home Depot. The Lincoln Electric Ranger 305 G EFI is a powerful multiprocessor stick, TIG, wire and pipe welding engine-driven welder that is ready for all day, everyday performance. It includes Lincoln Chopper Technology for superior arc performance. Kohler Gasoline Engine - 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use.
LINK2410-2 Features: -Product Type:Welder generator -Product Type:Mig welders -Product Type:Engine driven -Duty Cycle Percentage:100% -Output Amperage:400. Dimensions: -Overall Height - Top to Bottom:35.9 -Overall Width - Side to Side:25.3 -Overall Depth - Front to Back:60 -Overall Product Weight:1230
Shop for Welding & Soldering at The Home Depot. The Lincoln Electric Ranger 305 LPG Engine-Driven Welder is built with a 25 HP Kohler Liquid Propane Gas (LPG) engine for demanding applications in stick, TIG, wire and pipe welding. It delivers up to 300 Amps for powerful performance and features digital weld meters to display amperage and voltage for precise presets and convenient monitoring. Lincoln Electric Chopper technology provides easy starts, a smooth arc, low spatter and great bead appearance.
Ranger 305 LPG (Kohler) engine driven welder.Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and ARC gouging.Digital weld meters for amps and volts make it easy to precisely pre-set your procedures and monitor actual welding output.Provides easy starts, a smooth ARC, low spatter and excellent bead appearance.Skewed rotor design provides AC power suitable for operating Lincoln Electric inverter power sources.Welding and AC
The Ranger® 305 G is a powerful multiprocess stick, TIG, wire and pipe welding engine-driven welder that is ready for all day, everyday performan. Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging. Only compact gasoline welder in North America rated at 29volt for 300 amps of stick or CV welding.
K2410 - 1 Features: -Lincolnweld L-61 is a low carbon, medium manganese, medium silicon general purpose submerged arc wire. It produces welds with tensile strengths 5-15 ksi higher than those with L-60 depending on the flux and procedures used..-LINCOLNWELD L-61.-Helps minimize porosity due to rust or mill scale..-Reduces cracking tendencies on single pass welds in conditions of restraint..-Always use in accordance with the Material Safety Data Sheet (MSDS).-UNSPC CODE: 23271813.-EM12K SUBARC WIRE L61 1/16
LINK1725-11 Engine Type: Kohler Engine w/Electric Fuel Pump Features: -Product Type:Welder generator -Product Type:Mig welders -Product Type:Engine driven -Output Amperage:250 -Contact Tips Included:Yes. Dimensions: -Overall Height - Top to Bottom:36.2 -Overall Width - Side to Side:21.5 -Overall Depth - Front to Back:42.3 -Overall Product Weight:518
An Eagle 10,000 Plus welder/generator can help make work fly! It's a great choice for construction contractors, maintenance crews, farmers or ranchers, helping them get the job done. The Eagle 10,000 Plus does a variety of basic welding jobs and with 10,500 watts of surge AC generator power, it handles a variety of other jobs as well, including: lights, grinder, plasma cutter (separate air supply needed) or emergency power. Start Type: Electric start, Surge Watts (kW): 10,500, Fuel Capacity (gal.): 12, HP:
Outback® 185 Engine Driven Welder K2706-2 Top Features The Outback® 185 engine driven welder has portable DC stick welding with AC generator power. Low-Lift™ Grab Bars (Patent Pending) All Engine Controls on Front Control Panel 1-1/4 in. (32 mm) Diameter Rugged Tube Frame 6.8 Gallon (25.7 Liter) Fuel Tank Processes Stick Built for the Outdoors!™ Great for anyone who needs portable DC stick welding and AC generator power! The Low-Lift™ grab bars on both ends make lifting the
Why settle for less, when you can get more The Ranger GXT has all of the Xtras you need for construction and maintenance work. This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it is remote-ready for extended amperage control or AC TIG welding on aluminum with Lincoln's optional TIG module. The GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment such as Lincolns Pro-Cut 55 plasma cutter. U.S.A. Circuit
Lincoln Outback 185 Welder Generator New K2706-2 Lincoln Outback 185 Welder Generator New K2706-2 is great for anyone who needs portable DC stick welding and AC generator power. Outback 185 Outback 185 is great for anyone who needs portable DC stick welding and AC generator power. The Outback 185 is great for anyone who needs portable DC stick welding and AC generator power. The Low-Lift grab bars on both ends make lifting the Outback 185 on and off truck beds easy. The compact Outback 185 is easy to start
Eagle 10,000 Welder/Generator - 23 HP Kohler Engine K23432 Lincoln Electric K23432 Eagle 10,000 Welder/Generator - 23 HP Kohler Engine K23432 K23432 10 ,500 Watts Peak Single-Phase AC Generator Power. 23 HP Kohler® Gasoline Engine. Smooth DC Welding suitable for a broad range of stick electrodes 210 Amps/25 volts for DC welding welds with up to 5/32" electrodes.
Fender and Light Kit, For Use With Fender and Light Kit for K26351, K26361 And K26371 Welder Trailers
MPN #KH641. Lincoln Electric Welders GLOVES, GRAY ECON. Most Welding Tools & Accessories products are available for in-store pickup from Advance Auto Parts.
Fender And Light Kit, For Use With Fender And Light Kit For K2635-1, K2636-1 And K2637-1 Welder Trailers
Lincoln Ranger 305G Welder Generator (K1726-5) SHIPPING ABOUT US STORE " If you're in the market for for a powerful multiprocess MIG, TIG, Stick, Flux-Cored and Gouging machine, make sure you put the Lincoln Ranger 305G on your list. This powerful engine-driven welder is ready for anything you can throw at it. Kohler Gasoline Engine: 23 HP carburetor. Electric fuel pump to avoid vapor lock at high altitude operation. Multi-Process Welding Excellent DC multi-process welding for ge
Welder & Generator Combination - Commercial Features: 50 to 250 Amp - 120/240 Volt - 23 Hp Kohler Engine with Electric Start - 11 kW Generator - Stick & Wire Welding (TIG module available) Commercial Heavy Duty Lincoln Stick and Wire Welder and Generator
Features and Benefits AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps Easy to install. Comes with attached input power cable and plug. Easy to operate with front mounted AC/DC polarity switch and full range amperage selector switch for accurate and dependable procedure setting Traditional design provides long-life and low cost operation Compact size allows for easy storage and handling The AC/DC 225/125 is an arc welding power source with an AC welding output range of
Shop for Welding & Soldering at The Home Depot. The quiet, compact Lincoln Electric Vantage 400 is an ideal choice for construction teams, pipe rig owners and rental fleet managers. Select one of five Process Modes, including CC-Stick (up to 1/4 in.), Downhill Pipe (for stick), and DC Touch Start TIG, CV-Wire (up to 3/32 in.) or Arc Gouging mode which maximizes output with up to 5/16 in. carbon rods. Provides 19 kW peak (17 kW continuous) 3-Phase 240-Volt AC generator power. Will power industrial equipment
For demanding jobs that call for high amperage capabilities, the SAE-400 offers 400 amps for DC stick welding and 3,000 watts of AC power. 100% duty cycle at 400 amps for demanding applications - also rated at 500 amps. 100' (30. 5m) remote control is included – not a separate kit.