400A AC/DC True RMS Clamp MeterProduct FeaturesTrue RMSBacklit display and worklightMagnetic mount and lead storageNon-Contact Voltage TesterAnalog bar graphMeasures DC CurrentSpecification : 8.875" (225mm)Width: 3.375" (86mm)Weight (oz.): 10.7oz (303.34g)Batteries: 2 x AAAJaw Size: 1.25" (32mm)Included Accessories: test leads, batteries, case Safety Rating: CAT III 600V
Features and Benefits: Measures up to 999.9 A AC/DC Current Measures up to 2500 A AC with Flex Cable 1000 V AC/DC mV DC Range 500 mV Data Hold, Min/Max/Avg Backlight Comes with 10 inch iFlex Flexible Currnet Probe. Measures resistance, capacitance, frequency and continuity. Has inrush to capture motor start up. Large backlighted display for easy reading.
IBR1157 Features AC / DC clamp meter Detachable head for hard to reach places Small thin designed head Measures AC / DC volts and 200 A to 100 mA Product Type: Meters Generic Specifications Built in flashlight, back lighted display, large easy to read screen, data hold and is CAT III 600 V rated Generic Dimensions 3" H x 5" W x 10" D Dimensions Overall Length - Side to Side: 5 Inches Overall Height - Top to Bottom: 3 Inches Overall Depth - Front to Back: 10 Inches
features and benefits: detachable head for hard to reach places small thin designed head measures ac/dc volts and 200 a to 100 ma wire capacity up to 17 mm measures resistance and continuity the fluke 365 is a new, innovative fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires. clamp meter is a true rms meter with built in flashlight, back lighted display, large easy to read screen, data hold and is cat iii 600 v rated. comes with a soft case, test
The Triplett 9325 true RMS digital clamp-on meter measures current, voltage, resistance, continuity, diode test, temperature, and capacitance. Its four-digit LCD display is backlit for visibility in low light. The meter's jaws close around a conductor up to 40 mm (1.5") wide to measure AC and DC current and AC voltage through wire insulation and without interrupting the circuit. Test leads are included to measure voltage, current, resistance, capacitance, and frequency. The included K-type thermocouple
Get accuracy and convenience with this 1000A AC/DC True RMS Clamp Meter (CM-1550) (07799) from Greenlee. It gives you the most accurate measurement when harmonics are present, and it has a dual hall sensor for the most accurate measurements.
Take accurate measurements with this Greenlee AC/DC True RMS Clamp Meter (CM-950) (07700). It has selectable auto off for longer battery life, along with a dual hall sensor for DC amperage accuracy.
Cat III TRMS Auto Ranging digital clamp meter.Santoprene is over molded on the outer surface for comfort.Conforms to the IEC 0 0- and IEC 0 0- -032 standard.True RMS for AC voltage and current.Double insulation (protection class 600V CAT III and pollution degree 2).Power: .5V / AAA x 3.DCV: 4 / 40 / 400V|0.8%, 000V| .0%.ACV: 4 / 40 / 400V| .0%, 700V| .2%.8.9'' H x 3.4'' W x .3'' D.Product Type: Meters.Overall Length - Side to Side: 3.4 Inches.Overall Height - Top to Bottom: 8.9 Inches.Overall Depth - Front
ClampOn Power Meter, Max. Watts 600kW, Power Accuracy +/2.5 Percent Rdg + 5 Digits, Max. AC Amps 600, Max. DC Amps 600, Current Accuracy +/1.5 Percent Rdg + 5 Digits, Max. AC Volts 1000, Max. DC Volts 1000, Voltage Accuracy AC +/1.0 Percent Rdg + 5 Digits, DC +/0.7 Percent Rdg + 2 Digits, Power Factor 1.00 to 1.00, Jaw Opening 1.77 In., True RMS Yes, Display LCD, Safety Rating CAT IV 600V, CAT III 1000V, Includes Test Leads, Battery, Users Manual, Carrying Case
Clamp-On Power Meter, Max. Watts 1000kW, Power Accuracy +/-2.5 Percent Rdg + 5 Digits, Max. AC Amps 1000, Max. DC Amps 1000, Current Accuracy +/-1.5 Percent Rdg + 5 Digits, Max. AC Volts 1000, Max. DC Volts 1000, Voltage Accuracy AC +/-1.0 Percent Rdg + 5 Digits, DC +/-0.7 Percent Rdg + 2 Digits, Power Factor -1.00 to 1.00, Jaw Opening 1.77 In, True RMS Yes, Display LCD, Safety Rating CAT IV 600V, CAT III 1000V, Includes Test Leads, Battery, Users Manual, Carrying Case, Type-K Thermocouple Features Audible
Features and Benefits: Measures 600 A AC/DC current 600 V AC/DC Measures frequency capacitance and continuity Min/Max Average and inrush recording to capture variations Large easy to read back-light display Automatically sets the correct measurement range. Three year warranty. Includes soft carrying case.
This is a AC/DC Multifunction Digital Clamp Meter. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity. This product can be a total measurement solution.
features and benefits: detachable head for hard to reach places small thin designed head measures ac/dc volts and 200 a to 100 ma wire capacity up to 17 mm measures resistance and continuity the fl...
AC / DC clamp - on adaptors.Compatible with any test tool, power harmonics analyzer, oscilloscope, Multi Meter or other voltage measuring device.Sensitivity: 0. A / mV AC / DC . |3 .0 % , |2 .5 % .Accessories test leads and carrying case and 9V battery.Output: 0mV / A, mV / A.7.5'' H x 3.75'' W x 2.75'' D.Product Type: Meters.Overall Length - Side to Side: 3.75 Inches.Overall Height - Top to Bottom: 7.5 Inches.Overall Depth - Front to Back: 2.75 Inches.Overall Product Weight: 0.84 Pounds
Designed by electricians for electricians, this professional series true RMS auto-ranging clamp meter measures AC/DC Voltage, AC/DC current, resistance, capacitance, frequency, duty cycle and temperature. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV safety rated and includes case, test leads, test lead holder and batteries.
The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter. Safety Conformance EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV Part clamp meter, part clamp marvel. Read up to 1000 V and 1000 A in both ac and dc modes. Includes the new iFlexTM f
Shop for Electrical at The Home Depot. The compact Extech 380950 is a mini AC/DC clamp meter. The 380950 has an extra-small diameter jaw designed to reach into very small areas while providing 1mA resolution and very low-current sensitivity. The amp clamp performs essential troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work as well as residential, automotive, fleet maintenance, marine, and motorcycle electrical repair. Complete with test leads, two 1.5V AAA batteries and carrying
This Extech industrial test kit includes a CAT IV multimeter and a True RMS clamp meter with integrated AC voltage detector, test leads, Type K probe and more. Accuracy 0.5 DCV multimeter, 2.8 AC A clamp meter, Amps 600 AC/DC, Display Shows 6000 count...
MASTECH MS2138R True RMS 1000A AC/DC Clamp Meter Auto Ranging w/Frequency & Capacitance Test
1000A True RMS AC/DC Clamp Meter
Ac/Dc Amp Clamp Digital Meter - 100 Amps XXXW -SR -CM100 Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm) Clamp opens up to 1/2 inch (12.5 mm) One rotary switch operation Large 4 digit LCD display AC/DC Voltage measurement up to 600 volt AC/DC current measurement from 0.001 up to 100 amps Relative measurement One touch auto zero Peak hold function Data hold function Resistance measurement 2 readings per second sampling Continuity check with audible indicator Protective hand guard Low battery indicator Auto
Clamp Meter HVAC/R - 2236-20. (2) AA Batteries. Measures up to 600 amps AC, Large 1.30 in. jaw opening. Thin Jaw Profile for easier wire measurement in panels or in bundles. Wide Voltage range to 600 AC/DC volts. True-RMS for accurate measurement in all applications. Built-In Voltage Detector and LED Work Light. Thermocouple (dual banana) input for contact temperature measurement. 600 uA DC for Flame Rectification. High Contrast, White on Black Display with Backlight for easy reading. Rugged over-molding
Shop for Electrical at The Home Depot. The EX613 is a 400 Amp dual input AC/DC Clamp meter with built in non-contact voltage detector. This TRMS AC/DC Clamp Meter has dual thermocouple inputs for T1, T2, T1-T2 Differential Temperature measurements. This DMM measures AC/DC Voltage and Current, Resistance, Capacitance, and Frequency. Additional features include: DC micro-amp function for flame rod measurements, Diode open circuit voltage of 2.8 Volt, Data Hold plus fast Peak Hold for capturing current surges
Fluke Mid - Jaw 400/40A AC Clamp Meter Tester 397821 FLUKE -324 Features Designed to verify the presence of load current, AC voltage and continuity of currents, switches, fuses and contacts Ideally suited for current measurements up to 400A in tight cable compartments Offers DC voltage measurements Small size fits easily into tight places Precise measurements with 1.8% basic accuracy Continuity for quick checking of shorts Automatic low battery indicator Display hold function Voltage DC: 600V maximum,
Shop for Electrical at The Home Depot. The Klein Tools True RMS 400 Amp AC/DC Digital Clamp Meter is a great device for an electrician. This non-contact voltage measurement tool offers you the ability to store data for later use, and data is also protected from overload. The low battery indicator and automatic shut-off features help to conserve on energy. The package comes with batteries for your convenience.