non penetrating roof

Skywalker Signature Series Non-Penetrating Roof Mount Base (mast not included)

This Non-penetrating Roof Mount Base allows you to install dish antennas on flat roofs where no holes can be drilled. The heavy steel base is 34-3/4" square. Purchase the base, then choose the Antenna Masts you need!

ROHN FRM238 Non-Penetrating Roof Mount 36" x 2 3/8" mast

Non-penetrating roof mount with 2-3/8" OD x 30" pipeNon-penetrating roof mount with 2-3/8" OD x 30" pipe

VMP PRM-1 Pitched Roof Non-Penetrating Roof Mount (PRM-1)

VMP FRM-125 Non-Penetrating Roof Mount - 60" Mast with 1.25" OD (FRM-125) VMP FRM-166 Non-Penetrating Roof Mount - 26" Mast with 1.66" OD (FRM-166) VMP FRM-200 Non-Penetrating Roof Mount - 30" Mast with 2" OD (FRM-200) VMP P-6 Vent Pipe Mount (P-6) VMP PRM-1 Pitched Roof Non-Penetrating Roof Mount (PRM-1) VMP FRM-125 Non-Penetrating Roof Mount - 60 Mas... VMP P-6 Vent Pipe Mount (P-6)... VMP FRM-166 Non-Penetrating Roof Mount - 26 Mas...

Non-Penetrating Roof Mount Satellite Dish Mount

Steren Non-Penetrating Roof Mount Satellite Dish Mount Steren's non-penetrating roof mount ensures smooth and fast satellite antenna mounting, particularly on flat roofs. Perfect for temporary or permanent installa- tions, it is designed for mounting a DBS satellite dish atop a building without the use of fasteners that would penetrate the roof. The mount is constructed of steel and accommodates standard-size concrete blocks as anchors, providing a strong foundation for the DBS dish antenna. Mounting bolts,

NON-PENETRATING ROOF MOUNT - 1.50" O.D. TUBING, 30" HEIGHT

NON-PENETRATING ROOF MOUNT - 1.50" O.D. TUBING, 30" HEIGHT FRM150 $136.50 32.00 NON-PENETRATING ROOF MOUNT - 1.50" O.D. TUBING, 30" HEIGHT

NON-PENETRATING ROOF MOUNT - 2-3/8" O.D. PIPE, 30" HEIGHT

NON-PENETRATING ROOF MOUNT - 2-3/8" O.D. PIPE, 30" HEIGHT FRM238SP5 $239.20 53.00 NON-PENETRATING ROOF MOUNT - 2-3/8" O.D. PIPE, 30" HEIGHT

Non-Penetrating Roof Mount Satellite Dish Mount

Steren Non-Penetrating Roof Mount Satellite Dish Mount Steren's non-penetrating roof mount ensures smooth and fast satellite antenna mounting, particularly on flat roofs. Perfect for temporary or permanent installa- tions, it is designed for mounting a DBS satellite dish atop a building without the use of fasteners that would penetrate the roof. The mount is constructed of steel and accommodates standard-size concrete blocks as anchors, providing a strong foundation for the DBS dish antenna. Mounting bolts,

Non-Penetrating Roof Frame Mount

Non-Penetrating Roof Frame Mount [RT-100] Non-Penetrating Roof Frame is ballast secured using up to 20 cinder blocks (not included). The smooth underside ensures damage free contact with the rooftop. Six rubber mats (RT-5505) must be purchased separately to further protect the roof top surface. 7' non-penetrating frame. Hot-dipped galvanized. No mounting pipes included. Reviews:

GME Supply Co Rubber 18"" x 48"" Non-Penetrating Mat Roof

VMP FRM-238 Non-Penetrating Roof Mount - 30 Mast with 2.375" OD (FRM-238)

VMP Products VMP FRM-166 Non-Penetrating Roof Mount - 26" Mast with 1.66" OD (FRM-166) VMP FRM-200 Non-Penetrating Roof Mount - 30" Mast with 2" OD (FRM-200) VMP FRM-238 Non-Penetrating Roof Mount - 30 Mast with 2.375" OD (FRM-238)

VMP FRM-200 NON-PENETRATING ROOF MOUNT 2.00\" OD"

These non-penetrating roof mounts are constructed of steel and use standard concrete blocks to anchor. For use with DBS, antenna and satellite internet systems. FEATURES: 28???? mast with 2???? O.D.

VMP FRM-166 Non-Penetrating Roof Mount (30-Inch long 1.66-Inch OD mast, Grey)

These non-penetrating roof mounts are constructed of steel and use standard 8-Inch x 8-Inch x 16-Inch concrete blocks to anchor. For use with DBS, antenna and satellite internet systems.

Tessco Rohn Products Non-Penetrating Roof Mount-Mast is 2-3/8" O.D.& 60"H

Tessco Rohn Products Non-Penetrating Roof Mount-Mast is 2-3/8" O.D.& 60"H Mfg. Part: R-JRM23805 | CDW Part: 1329655 Mast is 2-3/8" O.D. and 60" in height. 62" Square. Mast is 2-3/8" O.D. and 60" in height. 62" Square. N/A Non-penetrating roof mount for communication antennas and microwave dishes. No penetration of roof surface. Pre-galvanized for corrosion protection. Designed for concrete block ballast (not included). Ships unassembled via UPS. - Tessco

Non-Penetrating Roof Mount 30" Mast with 2.00" O.D.

Non-Penetrating Roof Mount 30" Mast with 2.00" O.D. Highlights: * 30" Mast * 2.00" O.D. * Off-Air Antennas * Satellite Dishes Description is constructed of steel and uses standard concrete blocks to anchor on Flat Roof. Mast is 2.00 inches in Outside Diameter and 30 inches in Height from Base. For use with DBS, antenna and satellite internet systems. Can be Used as a Penetrating Mount without Ballast. Compares to Other Name Brand Hardware at Half the Price FRM Spec.s This Non-Penetrating Mount Series from

Tessco Nello Non-Penetrating Roof Mount

Tessco Nello Non-Penetrating Roof Mount Mfg. Part: 461587 | CDW Part: 1314314 60"H Non-Pen Roof Mount 60"H Non-Pen Roof Mount N/A Non-penetrating roof mount for communication antennas and microwave dishes. No penetration of roof surface. Pre-galvanized for corrosion protection. Designed for concrete block ballast (not included). Ships unassembled via UPS. - Tessco

APC NPR5 NON PENETRATING ROOF MOUNT WEIGHTED WITH 6 BLOCKS

NON PENETRATING ROOF MOUNT WEIGHTED WITH 6 BLOCKS

Steren Non-Penetrating Roof Mount

Steren Non-Penetrating Roof Mount

VMP FRM-166 NON-PENETRATING ROOF MOUNT 1.66\" OD"

These non-penetrating roof mounts are constructed of steel and use standard concrete blocks to anchor. For use with DBS, antenna and satellite internet systems. FEATURES: 26???? mast with 1.66???? O.D.

Non-Penetrating Roof Mount

Non-Penetrating Roof MountNon -Penetrating Roof Mount for Flat Roofs (requires concrete blocks for balast not included)2.375" OD (Welded Version) 8 Block(photo may not reflect actual unit based on production lots)

5ft Non-Penetrating Roof Mount with Roof Pads

5ft Non-Penetrating Roof Mount with Roof Pads Rohn R-FRM125 allows no penetration of roof surface. Galvanized for corrosion protection. 1-1/4" diameter. Features: No penetration of roof surface Galvanized for corrosion protection 1-1/4" diameter 36" x 36" square 60" in height 1-1/4" Diameter Pipe