- Refine By >
The DRIPCAP is a patented water conservation tool & grow medium protector. It uses a new innovative dripping method & hose holding technology. The DRIPCAP is made from recycled plastic which is recyclable & re-useable. Supported by a rear hinge, the DRIPCAP splits apart down the center, enabling an easy, secure installation and removal, at any stage of the plant's development.
M-D Products 05546 36" Aluminum and Vinyl Drip Cap Door Sweep: Aluminum and vinyl combo Comprised of a drip cap with vinyl flap seal to block out air and moisture Slotted holes allow for easy installation and adjustment Aluminum finish 36"
"Use to close-off the end of 1/2"" - . 710"" hose. Includes 3/4"" cap."
28" Drip Cap Fabricated from heavy mill finish aluminum, with formed ends and punched mounting holes. Can be used over entrance doors, storage doors, generator doors, windows and outside fixtures. They add a finished look to any coach as well as protection from rain running down the side of the coach. Available in sizes from 20" up.
This drip tubing stake from Orbit features Drip-Lock and an end cap that allows flushing and draining of drip sprinkler lines. You can easily connect ½-inch drip tubing for multiple dripping irrigation uses throughout your garden. With sturdy plastic construction, this drip stake easily inserts into and retracts from the ground for customization of your water drip system. This drip irrigation stake is ideal for mounting a drip system manifold or drip sprinkler head. Features and Benefits Has a ½-inch male
Use this end cap fitting to end the water supply at the end of the 1/2-in poly tubing. Ergonomically designed to make installation easier and to create a secure fit based on your hand strength. Typically used to close-off the water supply at the end of the 1/2-in poly tubing lines and has a removable threaded cap to flush the line or to open .
Underhill ME-8SS-PK MicroEase Small Area Professional Drip Irrigation Kit for faucet connection provides gentle watering for pots and small spaces. The MicroEase 8-Stream Spike 360-degree drip kit provides gentle irrigation that is ideal for pot, hanging plants, planting beds, gardens or any small area. Each emmitter is attached to a 6-inch spike and provides eight streams in a 360-degree pattern with a 0 to 3-feet diameter and an output of 0 to 14 GPH. Emitters can be adjusted from a gentle stream to a
Visit our Store Ask a question FREE SHIPPING Frost King A69A/36H Aluminum Drip Cap Door Sweep 1-3/4-Inch by 36-Inches, Silver Upgrade to 2-Day Air for just $5.99! Item Description: Features: Easy to install Keeps out dust and drafts Works on old or new doors Keeps out insects and rodents Simply set in place and attach screws Details Manufacturer: Frost King Color: Item Dimensions Length: 36 Width: 1.5 Height: 0.5 Weight: 0.45 pounds Comunication If you have a problem or question regarding your
Shop for Garden Center at The Home Depot. Flush your irrigation system quickly and easily with this 1/2 in. Compression End Cap. The end cap is used to periodically flush irrigation systems of dirt and other debris keeping them clog free. It is ideal to flush your system each time you install or replace drippers.
BAYONET DRIP CAP SETClean hose storage! No more compartment mess! Facilitates easy storage when caps are installed while hose is compressed. Just twist them on and you’re ready to go. MFG# T1020-3VP T10203VP UPC# 019079112033
Shop for Garden Center at The Home Depot. This easy-to-push-on End Cap works with the most common sizes of 1/2 in. drip tubing. It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance.
67462 Features: -Easy to push on.-Unique release simplifies installation and maintenance.-For outdoor use with cold water only.-Removable end cap for winterizing system or flushing.-Product Type: Drip system.Dimensions: -Overall Height - Top to Bottom: 2.25.-Overall Width - Side to Side: 1.75.-Overall Depth - Front to Back: 1.25.-Overall Product Weight: 0.06.
With a Drip-Lock feature, this drip tube fitting works with most common sizes of ½-inch drip irrigation line (.690, .700, .710). This Drip-Lock end cap is used to close the ends of ½-inch sprinkler drip line. It easily attaches and removes for simple installation and maintenance. Whether you are making repairs to your dripper system or customizing a dripping irrigation system, this drip tube fitting is great. Features and Benefits Works with most common sizes of ½-inch irrigation drip tubing including
½” Barbed Poly Hose End Cap Offered by: D rip R ite I rrigation P roducts ® Part Number: HI-FJJ-1500 (10) ½" barbed poly hose end cap Specifications: Fits ½" (16mm) poly hose (.710 O.D. x .620 I.D.) ½" barbed poly hose end cap with removable hose thread cap You are purchasing (10) ½" Barbed Poly Hose End Caps! NOTICE! When purchasing more than one item we will combine shipping charges whenever possible. After placing your order, but before paying for your order, please request an invoic
5/8" Drip Tape End- Cap Offered by: D rip R ite I rrigation P roducts ® Part Number: JI-END-06-LS (10) 5/8" drip tape end cap Specifications: Fits 5/8" I.D. Drip Tape Hose thread cap easily unscrews for easy flushing of drip tape! You are purchasing (10) 5/8" Drip Tape End Caps ! NOTICE! When purchasing more than one item we will combine shipping charges whenever possible. After placing your order, but before paying for your order, please request an invoice. Please take a look at all the produ
These easy to use caps can make your do-it-yourself gardening projects much easier. Have you ever needed to cap off one end of a irrigation fitting in your hydroponic garden? You are left searching for some sort of leak proof plug. Here is your answer. The EZ Pull End Caps are made from tough, flexible vinyl. They are easy to push on and pull off, yet provide a secure, leak proof fit.
* Drip cap * U shaped door bottom with drip cap uses soft vinyl fins to seal between bottom of door and threshold to block out air and moisture * Slotted fastener holes facilitate fast and easy installation and adjustments * Fits 1-3/8� doors * Aluminum
"Use to close the end of 1/2"" distribution tubing. Removable end-cap for winterizing or system flushing. Works with the most common sizes of 1/2"" drip tubing (. 690, . 700 and . 710 O. D. )."
Simply slide 1 side of end clamp over hose, bend hose and slide clamp over the bent end of hose. Made from ABS, for use with water pressure up to 60 PSI.
Use to cap off your existing pop up sprinklers to convert to drip watering. The simple design allows for a fast and easy process.
The Raindrip 1/2 in. Compression Hose End Plug is made in USA of quality materials for optimal performance with Raindrip hose and is interchangeable with competitive systems. It makes it easy to close off the end of a hose and flush out the line when needed. Made from quality material. Makes it easy to close off the end of a hose and flush out the line when needed Made from durable ABS Unscrew the cap and run water through the line to flush the system Connects to 1/2 in. hose For water pressure up to 60 PSI
Flush your irrigation system quickly and easily with this 1/2 in. Compression End Cap. The end cap is used to periodically flush irrigation systems of dirt and other debris keeping them clog free. It is ideal to flush your system each time you install or replace drippers. Pack of 25 Simple to use Cap may be removed and a garden hose may be attached Closes the end of 1/2 in. (.700 OD) tubing Compression end creates a water tight seal without glues or special tools For capping flushable irrigation tubing
Used to close off 5/8" tape. End cap has standard male garden hose threads with female threaded end cap. Cap can be easily removed for flushing. Very easy to use, long-lasting, heavy duty drip tape connectors, adapters and fittings for all your connection needs. 'PERMA-LOC' system of permanent, re-usable fitting connectors. Simply push tape over easy to use barbed end, then hand tighten locking nut over tubing for a permanent secure fit. Just loosen lock nut, pull tube off and re-use as needed. Product
84" Drip Cap 84 Drip CapFabricated from heavy mill finish aluminum, with formed ends and punched mounting holes.Can be used over entrance doors, storage doors, generator doors, windows and outside fixtures. They add a finished look to any coach as well as protection fSKU : - 84" DRIP CAPBRAND : PhilipsMFG. # : 3216DC-84-MF
29 of 195 Orbit Drip Irrigation Drip-Lock End Cap Stake, 1/2 x 1/2-MPT ORBIT UNDERGROUND | model # 67992 | item # 133548 Description 1 /2 " dlk x 1/2" male pipe thread, end cap, used for installing shrub heads or drip manifolds ideal for above ground watering of drip, shrub & lawn areas end cap allows flushing or draining lines when you want to deliver water to your drip system via an above ground garden hose, these sturdy stakes are the ideal mount for a drip manifold . Specifications Product Weight
Valterra Sewer Hose Drip Cap T1020-2VP Clean hose storage! No more compartment mess! Facilitates easy storage when caps are installed while hose is compressed. Just twist them on and you're ready to go ! Price : $5 .33 $4 .88 You Save: $0.45 (8%) Valterra Sewer Hose Drip Cap Additional Information T1020 -2VP Features Fits all 3" bayonet fittings with a simple twist-on connection, keeping storage compartment clean. Prevents messy drips. Just twist them onto a compressed hose for easy hose storage.