• About these results
  • 152 products from 6 stores for

    3" npt impeller

  • prices

    range
  • personalization

  • Colors

    Filter by color:
    Adjust your color:
  • Stores

    • Stores
  • Marketplaces

  • Brands

    • Brands
  • departments

    • Departments
  • payment types

    • Payment Types
  • certifications

    • Certifications
  • Lf 6.5hp Npt 3" Semi Trash Epa Gas Engine Water Pump

    3 " 6.5 hp Semi-Trash TRASH WATER PUMP 380GPM SELF PRIMING EPA APPROVE U30 FREE SHIPPING LOWER 48 STATES This item is brand new FEATURES Semi-Trash Water Pump is a Quiet (64 dB), compact and lightweight pump. It is self-priming. Long life seal resists corrosion, wear and heat. Cast iron impeller and volute last longer for semi-trash applications. It is also both EPA and CARB compliant. It powered by high efficiency EPA Certified LF engine; it is an easy starting, reliable and fuel efficient eng

    $225.99
    • Free shipping

    Highlights:

  • 3-7.5 Centrifugal Grinder Semi Open Impeller

    HPGF, HPGFH Model HPGF/HPGFH 3-7.5 Centrifugal Grinder Semi Open Impeller Key Features Explosion -proof Class 1, Division 1, Groups C and D Dual seals for maximum moisture protection Oil -filled motor for maximum heat dissipation and constant bearing lubrication Exclusive dual cutter design cuts solids to the smallest particle size Semi-open impeller provides steep non-overloading operating curve Available configurations, rails and accessories : Specifications Hertz : HPGF and HPGFH RPM: 60Hz and

    Highlights:

  • 3-7.5 HP Centrifugal Grinder Semi Open Impeller

    HPGH/HPGHH Model HPGH/HPGHH 3-7.5 HP Centrifugal Grinder Semi Open Impeller Key Features Explosion -proof Class 1, Division 1, Groups C&D Dual seals for maximum moisture protection Oil -filled motor for maximum heat dissipation and constant bearing lubrication Exclusive dual cutter design cuts solids to the smallest particle size Semi-open impeller provides steep non-overloading operating curve Specifications RPM : 3450 for 60 Hz and 2900 for 50 Hz Phase: 1Ø / 3Ø Horse Power: 3, 5, and 7HP Motor

    Highlights:

  • Yamaha YP30GH - 260 GPM (3") Water Pump

    The Yamaha yp30gh - 260 gpm (3") water pump is available for purchase today. Read Yamaha YP30GH reviews before checking out. Get the best deal on your new Yamaha YP30GH. Yamaha YP30GH - 260 GPM (3") Water Pump Shipping Features Specs Reviews Shipping Yamaha 4-Cycle OHV Engine • Precise valve actuation gives long life & fuel economy Cast Iron Cylinder Lining • Optimal heat dissipation & consistent performance Large Muffler • Provides quiet operation Cast Iron Impeller And Volute Case • Long-life,

    Highlights:

    New, Cast Iron
  • 3" Full Gas Trash Water Pump 3 Inch 6.5hp Motor Gasoline Pump Full Trash 6.

    3" NPT Self-Priming Centrifugal Trash Pump Ductile Iron Impeller Easy Clean Out Handles Waste and debris and soft solids up to 1.25" Durable trash pump, sturdy frame NO SHIPPING TO CALIFORNIA. FREE SHIPPING ONLY TO LOWER 48 USA. ADDITIONAL CHARGE FOR PUERTO RICO, HAWAII, AND ALASKA RETURNS ONLY ACCEPTED IF NO OIL OR GAS HAS BEEN IN ITEM Name Gasoline engine centrifugal pump Engine model 6.5HP Max. power output 4.8kw Nominal diameter 80mm or 3 inch NPT Pump delivery 66m 3 /h or 17435 gallons per

    $344.99
    • Free shipping

    Highlights:

  • Honda WB30XT2A General Purpose De-watering pump - 657950

    Honda WB30XT2A General Purpose De-watering pump - 657950 Honda WB30XT2A General Purpose De-watering pump - 657950 WB30XT2A General purpose, centrifugal 3" pump Easy starting Honda OHV commercial engine 275 gal./min. capacity Silicon carbide mechanical seal Cast iron volute and impeller General purpose pump, OHV engine, 3 inch ports, 275 gal. per min. capacity, rigid mount volute, heavy duty cast iron impeller, silicone carbide mechanical seals, full frame with isolation mounts Engine GX160 Displacement

    Highlights:

  • Riverside RP-TP3B 3” Trash Pump

    Riverside RP-TP3B 3” Trash Pump Riverside RP-TP3B 3” Trash Pump Max Capacity: 328 GPM Total Head: 93 ft Priming @ 25 ft.: 70 sec Ports: 3" NPT Max. Pressure: 40.3 psi Product Dimension: 29.5 in Length x 21.5 in Width x 21.8 in Height ENGINE Engine Type: 8 B&S Intek Pro OHV Power: 10 hp Fuel Capacity: 4.0 qts. Run Time at Max: 1.1 hrs. PUMP Impeller: Cast Iron, 2-Vane Open Design With Wide Solids Passage Volute: Cast Iron Easily Replaced Volute Housing: Sand Cast Aluminum, Easily Removed by 4 Disconnect

    Highlights:

  • Honda Pumps WB30 General Purpose

    Honda Pumps WB30 General Purpose Honda Pumps WB30 General Purpose General purpose, centrifugal 3" pump Easy starting Honda OHV commercial engine 275 gal./min. capacity Silicon carbide mechanical seal Cast iron volute and impeller Details Honda 's general purpose pumps offer the best features at a value price: Honda easy starting GX commercial grade engines Full frame protection Fixed-mounted cast iron volute and impeller Silicon-carbide seals Anti-vibration mounts Rugged performance Add in a full 3 year

    Highlights:

  • IPT Cast Iron Sewage and Trash Pump - 3in. NPT, 1.5in. Solids Capacity

    This heavy-duty IPT sewage/trash pump features a 3-phase, 230/460V motor and self-cleaning stainless steel impeller for clog and wear resistance. HP 7.5, Dimensions L x W x H in. 27 x 16 x 13, Flow...

    Highlights:

  • Liberty Leh102a3 Pump,sewage,1hp,12a 5ye97

    Submersible Sewage Pump,1 Hp,switch Type Tether,base Material Cast Iron,housing Cast Iron,impeller Material Cast Iron,voltage 208-230,phase 1,amps 12,height 14-1/8 In.,cord Length 25 Ft.,discharge Npt 3 In.,max. Dia. Solids 2 In.,max. Head 53 Ft.,max. Temp. 140 Degrees F,thermal Protection Yes,bearing Type Ball Bearing

    Highlights:

  • LIBERTY LEH152A3 Submersible Pump, 1.5 HP, 208230V

    Submersible Sewage Pump,Automatic,11/2 HP,Switch Type Tether,Base Material Cast Iron,Housing Cast Iron,Impeller Material Cast Iron,Voltage 208 to 230,Phase 1,Amps 15,Height 21 In.,Cord Length 25 ft.,Discharge NPT 3 In.,Max. Dia. Solids 2 In.,Max. Head 70 ft.,Max. Temp. 140 Degrees F,Thermal Protection Yes,Bearing Type Ball

    $1,407.56
    • Free shipping

    Highlights:

  • LIBERTY LEH104M32 Pump, Sewage, 1hp, 4.5a

    Submersible Sewage Pump,Manual,1 HP,Switch Type Float,Base Material Cast Iron,Housing Cast Iron,Impeller Material Cast Iron,Voltage 440 to 480,Phase 3,Amps 4.5,Height 162/5 In.,Cord Length 25 ft.,Discharge NPT 3 In.,Max. Dia. Solids 2 In.,Max. Head 53 ft.,Max. Temp. 130 Degrees F,Thermal Protection No,Bearing Type Ball

    $892.15
    • Free shipping

    Highlights:

  • White Cap# 187357

    Tsurumi Fill-Rite 20 gpm Auto Transfer Tank Pump White Cap# 187357 Fill-Rite Auto Transfer Pump, 20 gpm Tsurumi 3" 1 hp Submersible Trash Pump White Cap# 376HS375S61 Tsurumi Submersible Pump, 3 in NPT Discharge, 4900 gph, 1 hp, 1 Phase, 110/220 V Voltage, 5.4 A, 59 ft Head, 32 ft Cord Length, 12.4375 in Diameter, 15.25 in Height, Grey Iron Casting Case, Urethane Semi-Vortex Impeller

    Highlights:

  • Stainless Steel

    Series # G6-2-1/2 FEATURES • RADIAL SPLIT CASING DESIGN Casing is close grain iron of 30,000 p.s.i. minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump. Gasketed and keyed hook-type sleeve protects

    Highlights:

  • Stainless Steel

    Series # G9-2-1/2 FEATURES • RADIAL SPLIT CASING DESIGN Casing is close grain iron of 30,000 p.s.i. minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump. Gasketed and keyed hook-type sleeve protects

    Highlights:

  • Fast Response and Delivery

    Shopping Cart » SP50AB1 Bronze Hydromatic sewage (Marine applications), dewateri [SP50AB1 ] SP50AB1 Bronze Hydromatic sewage (Marine applications), dewatering pump, 140 GPM, Heads to 28 feet, 12 amp, 115V, 1/2 h.p., manual, 2 in. discharge, 1 1/4 in. solids, 10 foot cord. Specifications: Pump Type: Sewage, dewatering pump Pump Model: SP50 Capacities: to 140GPM (8.8 I/s) Heads: to 28 ft (8.5m) Electrical: 115V, 10, 12 FLA, 60Hz; Motor: (Single phase) - 1/2 HP split phase with thermal overload protection,

    Highlights:

  • Additional Gorman-Rupp Heavy Duty Bronze Straight Centrifugal Pumps

    Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Mechanical Seal Options: Buna N, Viton® and Silicon Carbide 1-1/2 to 3" NPT Port sizes Discharge Port rotates in 90 degree increments Flange ports available on 2 models Available with Totally Enclosed Fan Cooled Motors (TEFC) 56J or JM Shaft Industrial Pump Duty Motors 2 HP to 15 HP Single or Three phase 3450 RPM motors Delivers up to 500 GPM and 100 PSI Gorman-Rupp Bronze Straight Centrifugal

    Highlights:

  • Downloads

    / 3 in. Inlet/Outlet (Flange to NPT Kit included), HVAC Inline Circulator Pump, 100 GPM, 1/3 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.) 3 in. Inlet/Outlet (Flange to NPT Kit included), HVAC Inline Circulator Pump, 100 GPM, 1/3 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.), 5735-95, 5735-97, 5736-95, 5736-97 Only $459.00 (AMT Circulator Pumps) Please Select 1 Phase, Cast Iron Casing, 115/230 VAC [5735-95] ( +$459.00 ) 3 Phase, Cast Iron Casing, 230/460 VAC [5736-95] ( +$459.00 ) 1

    Highlights:

  • 3500G9-3F

    Series # G9 -3F FEATURES Bronze Fitted Cast Iron Construction. Close Coupled to a 50 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 4" Flanged Inches NPT Inlet, 3" Flanged Inches NPT Outlet. Impeller Diameter is 8.13 Inches . 3500G9 -3F 3500G93F Catalog # 3500G9-3F, Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 50 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 4" Flanged Inches NPT Inlet, 3" Flanged Inches NPT Outlet. Impeller

    Highlights:

  • Downloads

    / 3 in. Inlet/Outlet (Flange to NPT Kit included) HVAC Inline Circulator Pump, 150 GPM, 1 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.) 3 in. Inlet/Outlet (Flange to NPT Kit included) HVAC Inline Circulator Pump, 150 GPM, 1 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.), 5740-95, 5740-97, 5741-95, 5741-97 Only $592.88 (AMT Circulator Pumps) Please Select 1 Phase, Cast Iron Casing, 115/230 VAC [5740-95] ( +$592.88 ) 3 Phase, Cast Iron Casing, 230/460 VAC [5741-95] ( +$592.88 ) 1 Phase,

    Highlights:

  • Downloads

    / 3 in. Inlet/Outlet (Flange to NPT Kit included), HVAC Inline Circulator Pump, 140 GPM, 3/4 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.) 3 in. Inlet/Outlet (Flange to NPT Kit included), HVAC Inline Circulator Pump, 140 GPM, 3/4 HP, (Heating & Cooling, Boiler Feed, Circulation, Etc.), 5745-95, 5745-97, 5746-95, 5746-97 Only $540.60 (AMT Circulator Pumps) Please Select 1 Phase, Cast Iron Casing, 115/230 VAC [5745-95] ( +$540.60 ) 3 Phase, Cast Iron Casing, 230/460 VAC [5746-95] ( +$540.60 ) 1

    Highlights:

  • Gorman-Rupp Bronze Straight Centrifugal Pump - 3151-94

    Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Mechanical Seal Options: Buna N, Viton® and Silicon Carbide 1-1/2 to 3" NPT Port sizes Discharge Port rotates in 90 degree increments Flange ports available on 2 models Available with Totally Enclosed Fan Cooled Motors (TEFC) 56J or JM Shaft Industrial Pump Duty Motors 2 HP to 15 HP Single or Three phase 3450 RPM motors Delivers up to 500 GPM and 100 PSI Gorman-Rupp Bronze Straight Centrifugal

    Highlights:

  • BELL & GOSSETT

    BELL & GOSSETT 1150 items made by BELL & GOSSETT. This page shows items BELL & GOSSETT BELL & GOSSETT 1 1/2" NPT Isolation Flanges. This isolation flange is a combination of an isolation ball valve and a companion flange for circulators. It allows easy service or replacement of the circulator without the need to drain the system. The product fits the Bell & Gossett NRF/NBF/SSF wet rotors, Series PL-30, PL-36, PL-55, Series 100, PR and LR circulators. BELL & GOSSETT BELL & GOSSETT 1 1/2" NPT ISOLATION

    Highlights:

  • Submersible Sewage Ejector Pump, 3" Discharge

    S3SD & SB3SD Model S3SD, SB3SD Submersible Sewage Ejector Pump, 3" Discharge ". 3"Discharge Submersible Sewage Ejector Pump Models available: The Hydromatic S3SD and SB3SD sewage pumps are designed to transfer raw sewage with solids as large as S3SD RPM: 1150 S3SD RPM: 1750 Key Features Specifications HORSEPOWER : 1150 rpm: 1–2 HP / 1750 RPM: 1.5–7.5 HP MATERIALS OF CONSTRUCTION: Class 30 cast iron; ASTM A-48 MAXIMUM HEAD: up to 44 ft. (13.4 m) MAXIMUM CAPACITY: up to 385 GPM (24.3 LPS) SWITCH TYPE:

    Highlights:

  • Zoeller Sump Pump (3/10hp) 1-1/2in Npt, 19ft Max, ci. Model: M53

    Submersible Sump Pump,3/10 Hp,switch Type Vertical,cord Length 9 Ft.,115 Voltage,9.6 Amps,dia. 10-3/32 In.,discharge Npt 1-1/2 In.,height 10-1/16 In.,max. Head 19 Ft.,max. Dia. Solids 1/2 In.,gpm Of Water @ 5 Ft. Of Head 43,gpm Of Water @ 10 Ft. Of Head 34,gpm Of Water @ 15 Ft. Of Head 19,max. Temp. 130 Degrees F,off Point 3 In.,on Point 7-1/4 In.,base Material Polypropylene ,housing Cast Iron,top Material Cast Iron,impeller Material Polypropylene,duty Continuous,rpm 1550

    Highlights:

  • ITT MARLOW Commercial Grade 4" X 3", 7-1/2 HP, 3450 rpm, 208-230/460 - 3 phase - 3B32ECC23

    ITT MARLOW Commercial Grade 4" X 3", 7-1/2 HP, 3450 rpm, 208-230/460 - 3 phase - 3B32ECC23 3B32ECC23 Description Marlow 3B Series Commercial Pool Pump Self-priming centrifugal swimming pool pumps with integral suction strainer for commercial pool applications . Horsepower - 7.5 208-230/460V 3 Phase Design Features: Cast Iron Construction High Efficiency Impeller Multi-vane Replaceable Diffuser Rugged Casing with 4" Suction and 3" Discharge Female NPT Pipe Connections Integral Suction Strainer with

    Highlights:

  • Submersible Sewage Pump, 1.5hp, 480v, 20ft

    Submersible Sewage Pump, Manual, 1-1/2 HP, Switch Type Float, Base Material Cast Iron, Housing Cast Iron, Impeller Material Cast Iron, Voltage 440 to 480, Phase 3, Amps 5.3, Height 21 In., Cord Length 25 ft., Discharge NPT 3 In., Max. Dia. Solids 2 In., Max. Head 70 ft., Max. Temp. 120 Degrees F, Thermal Protection Yes, Bearing Type Ball

    Highlights:

  • Liberty Leh153m3-2 Submersible Sewage Pump ,1 .5hp ,230v ,83ft

    Submersible Sewage Pump,Manual,1-1/2 HP,Switch Type Float,Base Material Cast Iron,Housing Cast Iron,Impeller Material Cast Iron,Voltage 208 to 230,Phase 3,Amps 10.6,Height 21 In.,Cord Length 25 ft.,Discharge NPT 3 In.,Max. Dia. Solids 2 In.,Max. Head 70 ft.,Max. Temp. 140 Degrees F,Thermal Protection Yes,Bearing Type Ball

    $1,125.30
    • Free shipping

    Highlights:

  • Share:
  • About these links