• Refine >
  • About these results
  • 45 products from 2 stores for

    recycled fire hose belt

  • departments

  • Show Only

  • prices

  • Colors

    Filter by color:
    Adjust your color:
  • stores

  • marketplaces

  • payment types

  • certifications

  • recycled rubber firehose belt: size XXL

    This recycled belt is made from decommissioned nitrile rubber fire hose. It is deep blue thick rubber strengthened by canvas. Firehose is an amazingly durable material. Impervious to water, chemicals, abrasion, and or course, fire. There are ridges running along it's length, and over time the edges will fray a little bit as the canvas rubs against your belt loops. This particular belt will fit approximately a 38-42" waist. It is 1 1/4" wide, with a shiny brass buckle secured to the hose by matching

    $40.00

    Highlights:

    Thick, Rubber, Canvas
  • recycled firehose belt: size XL

    This orange rubber belt is made from recycled fire hose. This particular hose is bright-orange rubber strengthened by canvas. It has a brushed nickel-plated buckle, secured to the hose by chicago screws. You have to see this material to believe it! Firehose is extremely durable. Abrasion resistant, chemical resistant, water proof--and of course, it won't burn easily. The rubber is pliable and smooth, and looks great. The canvas sandwiched in the middle of the two rubber layers will start to fray a

    $40.00

    Highlights:

    Hose, Bright, Rubber, Canvas
  • recycled rubber firehose belt: size XXL

    This recycled belt is made from decommissioned nitrile rubber fire hose. It is deep blue thick rubber strengthened by canvas. Firehose is an amazingly durable material. Impervious to water, chemicals, abrasion, and or course, fire. There are ridges running along it's length, and over time the edges will fray a little bit as the canvas rubs against your belt loops. This particular belt will fit approximately a 38-42" waist. It is 1 1/4" wide, with a shiny brass buckle secured to the hose by matching

    $40.00

    Highlights:

    Shiny, Rubber, Canvas
  • recycled fire hose belt: size L

    This orange rubber belt is made from recycled fire hose. This particular hose is two layers of rubber strengthened by canvas. I made a belt with the textured orange rubber on the outside, and black on the inside, but the nickel buckle is secured with chicago screws, so a flat head screwdriver is all that you need to turn it black side out. The buckle is also recycled! It's a Ben Sherman hefty jeans buckle, with an antiqued nickel finish. You have to see this material to believe it! Firehose is extremely

    $40.00

    Highlights:

    Jeans, Smooth, Rubber, Canvas
  • recycled fire hose belt: size L

    This orange rubber belt is made from recycled fire hose. This particular hose is two layers of rubber strengthened by canvas. I made a belt with the textured orange rubber on the outside, and black on the inside, but the nickel buckle is secured with chicago screws, so a flat head screwdriver is all that you need to turn it black side out. The buckle is also recycled! It's a Ben Sherman hefty jeans buckle, with an antiqued nickel finish. You have to see this material to believe it! Firehose is extremely

    $40.00

    Highlights:

    Jeans, Smooth, Rubber, Canvas
  • recycled rubber fire hose belt: size S

    This orange rubber belt is made from recycled fire hose. This particular hose is two layers of rubber strengthened by canvas. I made a belt with the textured orange rubber on the outside, and black on the inside, but the black roller buckle is secured with chicago screws, so a flat head screwdriver is all that you need to turn it black side out. You have to see this material to believe it! Firehose is extremely durable. Abrasion resistant, chemical resistant, water proof--and of course, it won't burn

    $40.00

    Highlights:

  • recycled firehose belt: size L

    This recycled belt is made from decommissioned nitrile rubber fire hose. It is sunny-yellow thick rubber strengthened by canvas. Firehose is an amazingly durable material. Impervious to water, chemicals, abrasion, and or course, fire. There are ridges running along its length, and over time the edges will fray a little bit as the canvas rubs against your belt loops. This particular belt will fit approximately a 34-38" waist. It is 1 1/4" wide, with a shiny nickel buckle secured to the hose by aluminum

    $40.00

    Highlights:

    Shiny, Rubber, Canvas
  • recycled firehose belt: size M

    This sturdy belt is made of decommissioned fire hose. Hose is a unique and durable material. In this case I have used the inner jacket where the water would flow, with canvas adhered to black rubber. As you can see, over time the edges of the belt will fray mildly, giving it great character. This hose is grayish-tan canvas, with soft black rubber on the back. It has a shiny nickel buckle, with matching grommets and rivets. This fire hose belt will fit between a 32-36 inch waist, and is 1 1/2" wide. I have a

    $30.00

    Highlights:

    Hose, Sturdy, Durable Materials
  • recycled firehose belt: size M

    This sturdy belt is made of decommissioned fire hose. Hose is a unique and durable material. In this case I have used the inner jacket where the water would flow, with canvas adhered to black rubber. As you can see, over time the edges of the belt will fray mildly, giving it great character. This hose is grayish-tan canvas, with soft black rubber on the back. It has a shiny nickel buckle, with matching grommets and rivets. This fire hose belt will fit between a 32-36 inch waist, and is 1 1/2" wide. I have a

    $30.00

    Highlights:

    Shiny, Rubber, Canvas
  • SPECIAL fire hose belt: size XL

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The canvas on the edges of the belt will fray over time as it rubs against your belt loops. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. I've decided that since this particular hose has seen so much action, all of the belts that I make from it are going to have a 1/2 off special price!! This particular belt will fit

    $20.00

    Highlights:

    Jeans, Smooth, Rubber, Canvas
  • Custom Made to Order Firefighter Fire Hose Belt for Men or Women

    Made to order from out of service recycled Fire Hose! Each belt is handmade and often bears distress marks from providing many years of service of fighting fires. Each belt will vary with being plain or possible having lettering on the belt as seen in photos. Belt sizes range from 27"- 45" waist size (Please advise when ordering) Belt sizes is 1 1/2" in width Belt comes with eyelets These belt are very rugged, abrasion resistant & water proof. You wont be dissatisfied with your purchase. Each belt is custom

    $19.75

    Highlights:

  • fire hose belt: size S

    This belt is made from recycled black and green nitrile rubber fire hose. You have to see this material to believe it! Firehose is extremely durable. Abrasion resistant, chemical resistant, water proof--and of course, it won't burn easily. The rubber is pliable and smooth, and looks great. The canvas embedded in the middle of the rubber will start to fray a little bit, giving the belt great character. This particular belt will fit approximately a 30-34" waist, an is 1 1/2" wide. It has a shiny nickel

    $40.00

    Highlights:

    Shiny, Smooth, Rubber, Canvas
  • fire hose belt: size M

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a weathered metal buckle and brass grommets. This belt should fit between a 32-36" waist, and is 1 1/8" wide.

    $30.00

    Highlights:

    Metal Buckle, Rubber, Canvas
  • fire hose belt: size S

    This belt is made from recycled black and green nitrile rubber fire hose. You have to see this material to believe it! Firehose is extremely durable. Abrasion resistant, chemical resistant, water proof--and of course, it won't burn easily. The rubber is pliable and smooth, and looks great. The canvas embedded in the middle of the rubber will start to fray a little bit, giving the belt great character. This particular belt will fit approximately a 30-34" waist, an is 1 1/2" wide. It has a shiny nickel

    $40.00

    Highlights:

    Rubber
  • fire hose belt: size M

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a weathered metal buckle and brass grommets. This belt should fit between a 32-36" waist, and is 1 1/8" wide.

    $30.00

    Highlights:

    Metal Buckle, Rubber, Canvas
  • SPECIAL fire hose belt: size M

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The canvas on the edges of the belt will fray over time as it rubs against your belt loops. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. I've decided that since this particular hose has seen so much action, all of the belts that I make from it are going to have a 1/2 off special price!! This particular belt will fit

    $20.00

    Highlights:

    Jeans, Smooth, Rubber, Canvas
  • Custom Made to Order Firefighter Fire Hose Belt for Men or Women

    Made to order from out of service recycled Fire Hose! Each belt is handmade and often bears distress marks from providing many years of service of fighting fires. Each belt will vary with being plain or possible having lettering on the belt as seen in photos. Belt sizes range from 27"- 45" waist size (Please advise when ordering) Belt sizes is 1 1/2" in width Belt comes with eyelets These belt are very rugged, abrasion resistant & water proof. You wont be dissatisfied with your purchase. Each belt is custom

    $19.75

    Highlights:

  • fire hose belt: size M

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a weathered metal buckle and brass grommets. This belt should fit between a 32-36" waist, and is 1 1/8" wide.

    $30.00

    Highlights:

    Metal Buckle, Rubber, Canvas
  • firehose belt: size XL

    This rough-and-tough belt is made out of recycled nitrile rubber double-jacket firehose! I don't alter or dye my hoses in any way, I just cut them into straps to make the thickest, sturdiest belts around. This particular hose is black on the outside, and teal green on the inside. The belt is 1 1/2" wide, with a antiqued silver buckle, secured to the hose by two chicago screws. It will fit anyone with a waist size between 36-40". Firehose is extremely durable: water-resistant, chemical resistant, fire

    $40.00

    Highlights:

    Rubber
  • fire hose belt: size XXL

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. This particular length of fire hose came from the end, so it's been marked with a permanent marker. It was hose number D-112. This particular belt will fit approximately a 38-42" waist. It is 1 1/2" wide, with a nickel roller buckle, secured to the hose by chicago screws.

    $40.00

    Highlights:

    Rubber, Canvas
  • SPECIAL fire hose belt: size XL

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The canvas on the edges of the belt will fray over time as it rubs against your belt loops. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. I've decided that since this particular hose has seen so much action, all of the belts that I make from it are going to have a 1/2 off special price!! This particular belt will fit

    $20.00

    Highlights:

    Jeans, Smooth, Rubber, Canvas
  • skinny firehose belt: size M

    This recycled belt is made from decommissioned nitrile rubber fire hose. It is two layers of teal green and black rubber strengthened by nylon canvas. Firehose is an amazingly durable material. Impervious to water, chemicals, abrasion, and or course, fire. There are ridges running along it's length, and over time the edges will fray a little bit as the canvas rubs against your belt loops. This particular belt will fit approximately a 32-36" waist. It is 3/4" wide, with a shiny nickel buckle secured to

    $30.00

    Highlights:

    Shiny, Rubber, Canvas, Skinny
  • fire hose belt: size M

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a weathered metal buckle and brass grommets. This belt should fit between a 32-36" waist, and is 1 1/8" wide.

    $30.00

    Highlights:

    Metal Buckle, Rubber, Canvas
  • fire hose belt: size L

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a shiny brass buckle and matching grommets. This belt should fit between a 34-38" waist, and is 1 1/4" wide.

    $30.00

    Highlights:

    Hose, L, Sturdy
  • fire hose belt: size M

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. This particular belt will fit approximately a 32-36" waist. It is 2" wide, with a solid brass buckle secured to the hose by chicago screws.

    $40.00

    Highlights:

    Rubber, Canvas
  • fire hose belt: size M

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. This particular belt will fit approximately a 32-36" waist. It is 2" wide, with a solid brass buckle secured to the hose by chicago screws.

    $40.00

    Highlights:

    Tough, Hose, Rubber, Canvas
  • fire hose belt: size L

    This sturdy belt is made from recycled fire hose. The hose was decommissioned by the SFFD, so its time saving lives is over, but it's ready to begin its new life keeping your pants up! Hose is a durable and unique material. In this case I've used the inner part of a single-jacket forestry hose, which is black rubber strengthened by embedded canvas. I finished off the belt with a shiny brass buckle and matching grommets. This belt should fit between a 34-38" waist, and is 1 1/4" wide.

    $30.00

    Highlights:

    Shiny, Rubber, Canvas
  • firehose belt: size XL

    This rough-and-tough belt is made out of recycled nitrile rubber double-jacket firehose! I don't alter or dye my hoses in any way, I just cut them into straps to make the thickest, sturdiest belts around. This particular hose is teal green on the textured outside, and black on the inside. The belt is 1 1/2" wide, with a black roller buckle, secured to the hose by two chicago screws. It will fit anyone with a waist size between 36-40". Firehose is extremely durable: water-resistant, chemical resistant,

    $40.00

    Highlights:

    Tough, Rubber
  • fire hose belt: size XXL

    This rough and tough belt is made from recycled fire hose. This hose is brick red rubber strengthened by canvas. The great texture of this material has absorbed a lot of weathering and character from its life fighting fires. This particular length of fire hose came from the end, so it's been marked with a permanent marker. It was hose number D-112. This particular belt will fit approximately a 38-42" waist. It is 1 1/2" wide, with a nickel roller buckle, secured to the hose by chicago screws.

    $40.00

    Highlights:

    Tough, Hose, Rubber, Canvas
  • skinny firehose belt: size M

    This recycled belt is made from decommissioned nitrile rubber fire hose. It is two layers of teal green and black rubber strengthened by nylon canvas. Firehose is an amazingly durable material. Impervious to water, chemicals, abrasion, and or course, fire. There are ridges running along it's length, and over time the edges will fray a little bit as the canvas rubs against your belt loops. This particular belt will fit approximately a 32-36" waist. It is 3/4" wide, with a shiny nickel buckle secured to

    $30.00

    Highlights:

    Shiny, Rubber, Canvas, Skinny
  • Share:
  • About these links