STAINLESS STEEL FINISH Switchplates Outlet Covers, Rocker, GFCI 1 Decora
Rocker Blue Light Switch Cover is made of durable scratch resistant metal that will not fade, chip or peel. Featuring a high gloss finish, along with matching screws makes this cover the perfect finishing touch.
IER1318 INCLUDED IN THIS SET: (2)Copper Triple Ground Fault / Rocker GFI Switchplate Cover Please note other items that may be shown in this photo are not included Features: * 100pct Recyclable * Composition: 99.7pct Pure Recycled Copper * Lead Free (<.01pct) * Patina: Fired Color/Finish: * Finish: Oil Rubbed Bronze (Dark Brown) Dimensions: * Outer Dimensions: 6.5" x 4.5" Warranty: * Warranty: Limited Lifetime
FLORAL TAPESTRY Switchplates Outlet Covers, Rocker, GFCI 2 Decora
IER1317 INCLUDED IN THIS SET: (7)Copper Double Ground Fault / Rocker GFI Switchplate Cover Please note other items that may be shown in this photo are not included Features: * 100pct Recyclable * Composition: 99.7pct Pure Recycled Copper * Lead Free (<.01pct) * Patina: Fired Color/Finish: * Finish: Oil Rubbed Bronze (Dark Brown) Dimensions: * Outer Dimensions: 4.5" x 4.5" Warranty: * Warranty: Limited Lifetime
The Liberty Greek Key 1-Gang Antique Brass GFCI/Rocker Switch Wall Plate features an elegant border design and is made out of zinc die cast base material for durability. Change out your old wall plates and give any room a brand new feel. Screws included for easy installation.
Hand hammered copper Combination Switchplate, 2 Hole Outlet and Ground Fault/Rocker GFI Cover by Premier Copper Products.Hammered copper with an oil rubbed bronze finish.Each switch plate is individually handcrafted by skilled artisans .Composition : 99.7 percent pure recycled copper. Lead free - less than .01 percent lead content.SCOR.
Description: A mare & foal run on the top of this GFI rocker switch and outlet plate cover. This piece is reversible so it can be installed facing either direction. Laser cut with exceptional quality and detail. Mounting hardware included. Size: 4-5/8" wide x 6-3/4" tall. Material:18 gauge steel. Finish: Black wrinkle powder coat.
Back of switchplate is flat, not concave. Outlets and/or switches may need adjusting for switchplate to lie flat against wall. 100% Authentic Vickilane, not cheap copy.
15 Different Styles: Single Decora GFI Outlet Wall Plate - Height - 5" x Width - 3" x 1/4" Single Duplex Outlet Wall Plate - Height - 5" x Width - 3" x 1/4" Single Toggle Switch Wall Plate - Height - 5" x Width - 3" x 1/4" Single Blank Wall Plate - Height - 5" x Width - 3" x 1/4" Double Decora GFI Outlet Wall Plate - Height - 5" x Width - 5" x 1/4" Double Toggle Switch Wall Plate - Height - 5" x Width - 5" x 1/4" Double Duplex Outlet Wall Plate - Height - 5" x Width - 5" x 1/4" Combo Toggle Switch/GFI
Copper Single Ground Fault/Rocker GFI Switchplate Cover
Cast Cover, Rocker Type for Square Handle Tumbler or Toggle Switch, Vertical Mounting Orientation, Number of Gangs 1, Material of Construction Copperfree Aluminum, Color Gray, Height (In.) 4.56, Width (In.) 2.81, Standards UL 514A, C22.2 No. 18.1, NEMA 3R, Includes Gasket and Stainless Steel Screws
Copper Double Ground Fault/Rocker GFI Switchplate Cover
Shop for Electrical at The Home Depot. Use this Liberty Architectural MDF 2-Gang Espresso Rocker Switch Wallplate to decoratively cover a combination of 2 paddle switches or GFCI receptacles. Change out your old wall plates to give any room a new look. Mounting screws are included for installation convenience.
Copper Switchplate Quadruple Ground Fault/Rocker Cover GFI
Copper Switchplate Triple Ground Fault/Rocker Cover GFI
Enhance your rustic decor with the Traditional Wood Single Outlet and Rocker Switch Cover. Made from genuine wood, this electrical cover is available in your choice of twelve varieties: Alder (shown), Tennessee Aromatic Cedar, Rustic Hickory, Red Oak, Natural Maple, Knotty Pine, Douglas Fir, Cherry, Black Walnut, Blued Pine, Juniper or Russian Olive. Made in the USA. Black screws included. Measures approx. 5 1/2W x 5H. ~ Ships from the manufacturer. Allow 2 to 3 weeks. Cannot express ship.
TESSERAE Switchplates Outlet Covers, Rocker, GFCI 3 Toggle
IER1319 Features: * 100pct Recyclable * Composition: 99.7pct Pure Recycled Copper * Lead Free (<.01pct) * Patina: Fired Color/Finish: * Finish: Oil Rubbed Bronze (Dark Brown) Dimensions: * Outer Dimensions: 8" x 4.5" Warranty: * Warranty: Limited Lifetime<
Lighting Type: Wall Lighting.
ALMOND FILIGREE Switchplates Outlet Covers, Rocker, GFCI Duplex
This listing is for 1 set of rocker box cover studs with the top motor mount stud,with all of the lock washers and nuts, this is 33 pieces, the lock washers and nuts are Stainless Steel. These are for a Harley Davidson Big Twin Shovelhead motor, this is a great set up, if you are rebuilding or building a motor. These are parts for Shovelhead FL and FX from 1966 thru 1984. The 10 studs for the rocker box cover are part # 17506-66 part # 17508-66 and the 1 stud for the top motor mount is part # 1
Rocker Switch Cover, Thread Size 1/32 In., Inside Dia. 1.38 In., Color White, Material Plastic, Height 4-1/2 In., Width 5/8 In., Length 2-3/4 In., For Use With Mfr. No. Wst-en-w, Includes Screws
Premier Copper Products Combination 2-Hole Outlet and Ground Fault / Rocker GFI Switchplate Cover
Rocker Switch Cover, Color Black, Height 11/8 In., Width 9/16 In., Length 3/8 In., For Use With Mfr. No. 8004, 8005
Art Plates switch plates and electrical outlet covers are created using a special, high resolution, ultra violet printer that prints directly on our American made, heavy duty, metal switch plates. There simply are no other decorated switch plates available that can compare to the richness of color and resolution that Art Plates can achieve. Every switch plate has a final UV cured high gloss finish. This creates an extremely durable shiny finish that also helps protect it from abrasions and scratches. Every
Show your UND pride in any room with this unique accessory. This University of North Dakota double rocker light switch plate (GFCI outlet cover) is laser cut from a single piece of 18 gauge steel, then finished with a satin, team green powder coat with a slight metallic flake. This piece is officially licensed, and wears the correct UND logo and letter type. This item is flat, and not concave. Fits all standard style double light switches, as well as GFCI (GFI) outlets. Mounts easily with included hardware.
Custom Cycle Engineering Rocker Box Covers For Panhead Another original Randy Smith piece, the finned rocker boxes are an iconic piece of Panhead history. Since they're cast from aluminum, they reduce the warping and aliminate the leaks associated with the stamped steel stock units. Features: Original Randy Smith design Made from 356 T-6 aluminum finished in natural or polished Designed to eliminate the oil seepage associated with the stock Panhead rocker box covers (12 bolt design) Sold in pairs Made in