• Refine by >
      • 60 products from 9 stores for

        duratrax clutch bell gear

        Ads
  • Show Only

  • prices

  • Colors

    Filter by color:
    Adjust your color:
  • stores

    • More ...
  • marketplaces

  • brands

    • More ...
  • payment types

  • certifications

  • Clutch Bell Gear 15T 2-Speed 2WD

    This is the Replacement 2-Speed Clutch Bell Gear for the / DuraTrax Maximum ST and MT Pros. / This screws onto the clutch bell for the 2-Speed Transmission. / / FEATURES: Strong Alloy Construction / Threaded on the inside for easy installation onto the Clutch Bell / Black in Color / / INCLUDES: One 15T Threaded Black Clutch Bell Gear / / REQUIRES: Threadlocking compound. / baw 1/31/01 / ir/jl

    $6.50
    • Free shipping

    Highlights:

    Replacement, Clutch Bell, Easy Installation, Ir, Color
  • Duratrax Clutch Bell 16T/19T Street Force GP

    This is the Replacement Clutch Bell for the Street Force GP Kits. FEATURES: Steel Alloy Construction 16T Gear Silver in Color 19T Gear Green in Color INCLUDES: One 16T/19T Clutch Bell REQUIRES: Two 5x8x2.3mm bearing (DTXC1523)

    $16.68
    • Free shipping

    Highlights:

    Replacement, Steel, Silver, Color
  • Clutch Gear 15T 2-Speed Overdrive ST

    This is the Clutch Gear 15 Tooth for the Two Speed on the Overdrive ST. / This mounts to the Clutch Bell and Drives the Spur gear. / / FEATURES: Aluminum construction / Black in color / 15 Tooth / / INCLUDES: One 15T clutch gear / / REQUIRES: Clutch bell DTXC7136 / / jim 10/24/01 / ir/kh

    Highlights:

    Clutch, Bell
  • Clutch Bell 32P 15T Nitro Evader ST

    This is a Clutch Bell for the Duratrax Nitro Evader St. This goes over the crankshaft of the engine and transfers power to the spur gear. FEATURES: Aluminum Construction Silver in Color Very Durable INCLUDES: 1 Clutch Bell part #80 REQUIRES: Installation onto the engine of the Nitro Evader St. SPECS: Teeth: 15 Pitch: 32 Outer Diameter of Bell: 1.096" (28mm) EEW 5/14/03 ir/jxs BOX DIMENSIONS: 2.75" W. X 1.00" H. X 3.00" L. BOX WEIGHT: .04 LBS.

    $12.99
    • Free shipping

    Highlights:

    Durable, Aluminum, L, Box, Silver, Powered, Transfer, Ir, Color
  • DURATRAX Clutch Bell Gear 15T 2-Speed 2WD

    This is the Replacement 2-Speed Clutch Bell Gear for the / DuraTrax Maximum ST and MT Pros. / This screws onto the clutch bell for the 2-Speed Transmission. / / FEATURES: Strong Alloy Construction / Threaded on the inside for easy installation onto the Clutch Bell / Black in Color / / INCLUDES: One 15T Threaded Black Clutch Bell Gear / / REQUIRES: Threadlocking compound. / baw 1/31/01 / ir/jl

    $6.50
    • Free shipping

    Highlights:

    Replacement, Clutch Bell, Easy Installation, Ir, Color
  • Clutch Bell 18T

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. YOU WILL RECEIVE: One 18 Tooth Clutch Bell REQUIREMENTS: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a

    $18.93
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel
  • Duratrax Ultralite Clutch Bell 14T DTXC2522

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. INCLUDES: One 14 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) DIMENSIONS: 28.5mm OD 26mm ID 20mm Front to Back COMMENTS: To use this clutch bell with an OS .21

    Highlights:

    Long Life, Car, Mesh, Steel, Ir
  • Duratrax Clutch Bell 18T

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. YOU WILL RECEIVE: One 18 Tooth Clutch Bell REQUIREMENTS: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a

    Highlights:

    Long Life, Car, Mesh, Steel
  • Clutch Bell 13T

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 / Scale Cars, As Well As the Pirate and Mugen Cars. / / FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. / Made of Hardened Steel for Long Life and Precision Gear Mesh. / Choose from 13 to 18 Tooth Sizes for Any Racers Needs. / / INCLUDES: One 13 Tooth Clutch Bell / / REQUIRES: Different Sized Clutch Bearings: One 5x8mm (DTXC1523) and / One 5x8mm Flanged (DTXC1527)

    $16.99
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel
  • Duratrax Ultralite Clutch Bell 17T DTXC2525

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. INCLUDES: One 17 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a 1/4-28 clutch

    Highlights:

    Long Life, Car, Mesh, Steel, Ir
  • Duratrax Ultralite Steel Clutch Bell 15T Warhead DTXC2523

    This is the optional DuraTrax Ultralite 15 Tooth Clutch Bell for the DuraTrax Warhead. Also fits other vehicles such as some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Count for Any Racer's Needs. INCLUDES: One 15 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this

    Highlights:

    Long Life, Car, Mesh, Steel, Ir, Vehicle
  • Duratrax Ultralite Clutch Bell 13T DTXC2521

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. INCLUDES: One 13 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: One 5x8mm (DTXC1523) and One 5x8mm Flanged (DTXC1527) COMMENTS: To use this clutch bell with an OS .21 engine, you must

    Highlights:

    Long Life, Car, Mesh, Steel, Ir
  • Duratrax Ultralite Clutch Bell 18T DTXC2526

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. INCLUDES: One 18 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a 1/4-28 clutch

    Highlights:

    Long Life, Car, Mesh, Steel, Ir
  • Clutch Bell 2-Speed Thunder Quake

    Product details Clutch Bell 2-Speed Thunder Quake Item ID: DTXC7132 | Retail Price: $21.99 Phil's Hobby Shop price: $18.49 Product description This is the Stock replacement Clutch Bell for the Duratrax Thunder Quake. This part houses the clutch shoes, and holds the clutch gears. FEATURES: Steel construction INCLUDES : One Clutch Bell with 1st Speed Gear preinstalled (key #66) REQUIRES: 2nd clutch bell gear, if needed, use DTXC7133 SPECS Total outer diameter: 28.5mm (1.13") Inner diameter: 26.8mm (1.06")

    Highlights:

    Replacement, Key, Bar, Steel, Box, Total
  • DURATRAX Clutch Bell 32P 15T Nitro Evader ST

    This is a Clutch Bell for the Duratrax Nitro Evader St. This goes over the crankshaft of the engine and transfers power to the spur gear. FEATURES: Aluminum Construction Silver in Color Very Durable INCLUDES: 1 Clutch Bell part #80 REQUIRES: Installation onto the engine of the Nitro Evader St. SPECS: Teeth: 15 Pitch: 32 Outer Diameter of Bell: 1.096 (28mm) EEW 5/14/03 ir/jxs BOX DIMENSIONS: 2.75 W. X 1.00 H. X 3.00 L.BOX WEIGHT: .04 LBS.

    $12.99
    • Free shipping

    Highlights:

    Durable, Aluminum, Box, Silver, Powered, Transfer, Ir, Color
  • Clutch Bell 14T

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 / Scale Cars, As Well As the Pirate and Mugen Cars. / / FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. / Made of Hardened Steel for Long Life and Precision Gear Mesh. / Choose from 13 to 18 Tooth Sizes for Any Racers Needs. / / INCLUDES: One 14 Tooth Clutch Bell / / REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) / / DIMENSIONS: 28.5mm OD / 26mm ID / 20mm Front to Back

    $19.94
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel
  • Duratrax Ultralite Clutch Bell 18T DTXC2526

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. INCLUDES: One 18 Tooth Clutch Bell REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a 1/4-28 clutch

    Highlights:

    Long Life, Car, Mesh, Steel, Ir
  • DURATRAX Steel Clutch Bell 15T Warhead

    This is the optional DuraTrax Ultralite 15 Tooth Clutch Bell for the DuraTrax Warhead. Also fits other vehicles such as some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Count for Any Racer's Needs. YOU WILL RECEIVE: One 15 Tooth Clutch Bell REQUIREMENTS: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS:

    $19.67
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel, Vehicle
  • Nitro Warhead EVO 27 RTR

    Product details Nitro Warhead EVO 27 RTR Item ID: DTXD69** | Retail Price: $699.99 Phil's Hobby Shop price: $449.80 Product description This is the 1/8 scale, Glow Powered, Radio Controlled , DuraTrax Nitro Warhead Evo Off-Road Ready-to-Run Monster Truck. Includes The Following Upgrades From The Original Warhead; **Fast two-way electric starting! Use the included hand -held * * Kwik -Pit Super Start RTR for quick shaft starting. An easy-acess flywheel also lets you bump-start with most starter boxes.

    Highlights:

  • 1/8 835E Buggy 2.4GHz RTR White

    DTXD78WW 1/8 835E Buggy 2.4GHz RTR White DTXD78WW 1/8 835E Buggy 2.4GHz RTR White FEATURES Onyx 1/8 scale, 2200kV Brushless Motor Onyx 1/8 scale 120A Waterproof ESC DuraTrax 240FS 2-Channel 2.4GHz Radio System SX501WP Waterproof High-Torque Digital Servo Painted Body Countersunk, 3.25 mm Anodized Aluminum Chassis Threaded, Big Bore Aluminum Oil Shocks Hardened Steel Clutch Bell, Spur, Differential Pinion & Ring Gears 3.5 mm Shock Shafts 4 mm Shock Towers 5 mm Camber Turnbuckles & 4.5 mm Tie-Rod Turnbuckles

    Highlights:

    Affordable, Rtr, Bell, Anodized Aluminum, Protection, Protective, Box, Rear, Hub, Replacement, Hex, Painted, Shock, Hard, Aluminum, Battery, Waterproof, Starting, Bar, Performance, Steel, Wheel, Digital
  • DURATRAX Clutch Bell 18T

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 Scale Cars, As Well As the Pirate and Mugen Cars. FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. Made of Hardened Steel for Long Life and Precision Gear Mesh. Choose from 13 to 18 Tooth Sizes for Any Racers Needs. YOU WILL RECEIVE: One 18 Tooth Clutch Bell REQUIREMENTS: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) COMMENTS: To use this clutch bell with an OS .21 engine, you must also purchase a

    $18.93
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel
  • Duratrax 1/8 835B Nitro Buggy .27 2.4GHz Yellow DTXD72**

    This is the 1/8 scale Glow Powered, 2.4GHz Radio Controlled Ready to Run 835B Buggy from Duratrax. FEATURES: Chassis: Countersunk hard anodized aluminum 0.13 (3.25mm) thick Drive: Four wheel with hardened steel driveshaft and gears Engine: SuperTigre G-27CX .27 cu in (4.4 cc) with recoil starter, polished tuned pipe, glow plug, air filter and 3-year limited warranty Radio: Duratrax 2-ch FTR (Futaba Transmitter Ready), compatible with all Futaba 2.4GHz FHSS systems, 5-cell 6V 1300mAh NiMH receiver pack and

    $349.98
    • Free shipping

    Highlights:

    Aa Batteries, Wall, Disc, Molded, Bell, Anodized Aluminum, Starter, Adjustable, Decal, Powered, Control, Rear, Painted, Metal, Nitro, Bar, Radio Controlled, Steel, Wheel, System, Vehicle, Rtr, Wide, Thick, Maintenance, Cars, Hex, Shock, Vertical, Hard, Aluminum, Ready To Run, Racing, Battery, Polished, Digital
  • Duratrax Clutch Bell 32P 15T Nitro Evader ST DTXC7134

    This is a Clutch Bell for the Duratrax Nitro Evader St. This goes over the crankshaft of the engine and transfers power to the spur gear. FEATURES: Aluminum Construction Silver in Color Very Durable INCLUDES: 1 Clutch Bell part #80 REQUIRES: Installation onto the engine of the Nitro Evader St. SPECS: Teeth: 15 Pitch: 32 Outer Diameter of Bell: 1.096 (28mm) EEW 5/14/03 ir/jxs

    Highlights:

    Durable, Aluminum, Silver, Powered, Transfer, Ir, Color
  • Nitro Evader ST RTR

    Product details Nitro Evader ST RTR Item ID: DTXD62** | Retail Price: $459.99 Phil's Hobby Shop price: $291.43 Product description This is the 1/10 scale Glow Powered, Radio Controlled, Rear Wheel Drive DuraTrax Nitro Evader Off-Road Ready-to-Run Stadium Truck . FEATURES Chassis : 7076 T-6 Blue anodized aluminum, .12" (3mm) thick Drive: Rear wheel drive Drive Type: Gear driven Engine: .18 (3cc) two stroke with pull-starter with two needle Rotary Carb, heavy duty connecting rod, and dual ball bearings

    Highlights:

  • 1/8 835E Buggy 2.4GHz RTR Black

    DTXD78LL 1/8 835E Buggy 2.4GHz RTR Black DTXD78LL 1/8 835E Buggy 2.4GHz RTR Black FEATURES Onyx 1/8 scale, 2200kV Brushless Motor Onyx 1/8 scale 120A Waterproof ESC DuraTrax 240FS 2-Channel 2.4GHz Radio System SX501WP Waterproof High-Torque Digital Servo Painted Body Countersunk, 3.25 mm Anodized Aluminum Chassis Threaded, Big Bore Aluminum Oil Shocks Hardened Steel Clutch Bell, Spur, Differential Pinion & Ring Gears 3.5 mm Shock Shafts 4 mm Shock Towers 5 mm Camber Turnbuckles & 4.5 mm Tie-Rod Turnbuckles

    Highlights:

    Affordable, Rtr, Bell, Anodized Aluminum, Protection, Protective, Box, Rear, Hub, Replacement, Hex, Painted, Shock, Hard, Aluminum, Battery, Waterproof, Starting, Bar, Performance, Steel, Wheel, Digital
  • DURATRAX Clutch Bell 16T/19T Street Force GP

    This is the Replacement Clutch Bell for the Street Force GP Kits. FEATURES: Steel Alloy Construction 16T Gear Silver in Color 19T Gear Green in Color INCLUDES: One 16T/19T Clutch Bell REQUIRES: Two 5x8x2.3mm bearing (DTXC1523)

    $17.99
    • Free shipping

    Highlights:

    Replacement, Steel, Silver, Color
  • Duratrax Clutch Bell 16T/19T Street Force GP DTXC7123

    This is the Replacement Clutch Bell for the Street Force GP Kits. FEATURES: Steel Alloy Construction 16T Gear Silver in Color 19T Gear Green in Color INCLUDES: One 16T/19T Clutch Bell REQUIRES: Two 5x8x2.3mm bearing (DTXC1523) jim 6/11/00 updated tjt 4/21/01 ir/jl

    Highlights:

    Replacement, Steel, Silver, Ir, Color
  • Maximum MT Pro RTR w/Torq 16

    Product details Maximum MT Pro RTR w/Torq 16 Item ID: DTXD91** | Retail Price: $549.99 Phil's Hobby Shop price: $359.99 Product description This is a 1/10 scale Glow Powered, Radio Controlled, Two Wheel Drive (2WD) DuraTrax Ready-To-Run Maximum MT Pro Off-Road Monster Truck with a DuraTrax .16 TORQ Pull-Start Engine, Pre-Painted/Trimmed Body and DuraTrax by Futaba 2 channel Pistol Grip Radio. Based on the popular Maximum MT with nearly $300.00 of hop-ups included ! FEATURES These features are the included

    Highlights:

  • 1/8 835B Buggy .27 2.4GHz Org

    DTXD72NN 1/8 835B Buggy .27 2.4GHz Org Save $160 .00 (28 % ) FEATURES Duratrax 2-Channel 2.4GHz "FTR" Radio System Recoil -Started SuperTigre G-27CX Engine (Glow plug included.) SX500 Digital High-Torque, Metal-Geared Steering Servo 5-cell, 1300mAh NiMH Receiver Battery & 110V Wall Charger 300 cc (10.1 fl. oz) Fuel Bottle & "C" Cell Glow Starter ("C" battery required.) Painted body Hard-Anodized, Countersunk 3.25 mm Aluminum Chassis 16 mm Gray-Anodized, Threaded Aluminum Big Bore Shocks Gray -Anodized

    Highlights:

    Wall, Cell, Bell, Anodized Aluminum, Starter, Rear, Hub, Hex, Painted, Metal, Shock, Hard, Aluminum, Battery, Racing, Starting, Bar, Steel, Polished, Digital
  • Clutch Bell 14T DTXC2522

    DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10 / Scale Cars, As Well As the Pirate and Mugen Cars. / / FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration. / Made of Hardened Steel for Long Life and Precision Gear Mesh. / Choose from 13 to 18 Tooth Sizes for Any Racers Needs. / / INCLUDES: One 14 Tooth Clutch Bell / / REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535) / / DIMENSIONS: 28.5mm OD / 26mm ID / 20mm Front to Back

    $19.94
    • Free shipping

    Highlights:

    Long Life, Car, Mesh, Steel
  • Share:
  • About these links Ads