The VGA+3.5mm Audio over UTP Box Transmitter to Box Receiver Kit allows you to extend a VGA and 3.5mm audio signal over two Cat5/Cat5e/Cat6 cables up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end. EQ (sharpness) adjustments can be
HDMI 1.4 Passive Extender Kit The HDMI Passive Extender Kit (500402) allows HDMI equipment to be connected up to 100 ft (30m) via two (2) Cat5e unshielded twisted pair cables in a point-to-point configuration at 1080p resolution. The product also works with 1080p up to 150 ft (45m) via Cat6 cables. The kit comes with one (1) transmitter and one (1) receiver.
The WHD-PRO Wireless/Shotgun Microphone Audio Kit for DSLR by Azden(R) includes a complete WLX-PRO VHF lavalier microphone system and an SMX-10 stereo microphone in a custom carrying case. The WLX-PRO includes the WL/T-PRO, a belt-pack transmitter (WM-PRO) with electret condenser lavalier microphone (EX-503), and the WR-PRO receiver, which comes with both shoe-mount and hook-and-loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
Full-Range 2.4 GHz DSMX 6-Channel Radio, For DSM2 / DSMX Receivers, Bind-N-Fly Compatible, Airplane and Helicopter Programming, 10-Model Memory/ Model Copy/ ModelMatch, Servo Sync Technology, Programmable Dual Rates, 5-point Graphic Throttle Curve, Supports Mode 1 and Mode 2 Configuration, 500 mAh 1S 3.7V 25C LiPo Flight Battery, Spektrum DX6i 6-Channel DSMX Transmitter with 500 mAh LiPo Flight Battery Kit is a starter bundle from B&H that features the Spektrum DX6i transmitter (radio controller) for RC
Trigger your monolites using RF wireless signals. Better than infrared or simple slaves. Sensite up to 85 ft. Transmitter fits on the camera's hot shoe (PC cord also provided). A female PC outlet is also included on the receiver if you want to use it with a speedlite with a PC cord. Allows the user to select from 4 different channels. Prevents interference when used in an areas with other flash triggers, or if you encounter interference from other wireless networks. Specifically designed for standard
For use specifically with the KA1000 and KA300 product line. Designed for people with moderate to profound hearing loss. The KA1000RR notifies you to various alerts such as doorbell, telephone, videophone and emergency alarms. Compatible with transmitter: KA300TX Transmitter, KA1000DK Door Signaler Transmitter, KA1000TR Telephone Ringer Transmitter, KWA300TX Weather Alert Kit
IOGEAR's Long Range Wireless 5x2 HDMI Matrix PRO with Multicast is the first to send uncompressed Full HD 1080p up to an astonishing 200 feet*, including the ability of multicasting up to a total of 4 wireless HDMI receivers.Natively the kit consists of a Transmitter with connections for HDMI and Component (5-port switch / matrix) and a Wireless Receiver. It also provides a loop through (local port) on the transmitter for an advanced 2 HDTV set up. The wireless matrix feature allows a user to switch and
IOGEAR Long Range Wireless 5x2 HD Matrix Pro with (2) Additional Receivers 17834829 GWHDMS52MBK3 Specs IOGEAR 's Long Range Wireless 5x2 HDMI Matrix PRO with Multicast is the first to send uncompressed Full HD 1080p up to an astonishing 200 feet, including the ability of multicasting up to a total of 4 wireless HDMI receivers. Natively the kit consists of a Transmitter with connections for HDMI and Component (5-port switch / matrix) and a Wireless Receiver. It also provides a loop through (local port)
VONNIC Accessory A2400 2.4Ghz Wireless A/V/Alarm Receiver Transmitter Kit RTL
C2G TruLink VGA+3.5mm Audio over UTP Wall Plate Transmitter/ Box Receiver Kit Ensure high performance signal extension with the C2G TruLink VGA+3.5mm Audio over UTP Wall Plate Transmitter/ Box Receiver Kit. This VGA transmitter and receiver can extend VGA + 3.5mm over standard Cat5/Cat5e/Cat6 twisted pair up to 300ft distance at 1920x1200 or 1920x1080 resolutions. It is easy to plug and play and doesnt need any software or drivers. Also, it is RoHS Compliant and is compatible with any operating system. You
This is a single-channel active transmitter that can transmit live video over unshielded twisted pair (UTP) cable. Cat5e or Cat6 cable is recommended. The receiver has 1 BNC, 2 RCA and data terminal block to RJ45 and 4 pairs of terminal blocks. Transmission distance up to 1.2KM. AC/DC 9V~24V.
Transmitter Box Receiver The VGA+3.5mm Audio over UTP Box Transmitter to Box Receiver Kit allows you to extend a VGA and 3.5mm audio signal over two Cat5/Cat5e/Cat6 cables up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end. EQ
VHF receiver, transmitter, lapel & headset microphones with one radio channel frequency. Requires two 9-volt batteries (not included). Includes cables to connect to amplifierWireless lapel and headset provides high-end audio performance at the right price. VHF high bank microphone receiver and transmitter are included, along with cables to connect with amplifier. Set runs on two 9-volt batteries and has one radio channel frequency.
Tx/Rx Set for Sensitive Medical Uses, Secure Retention DVI In/Out Connectors, Supports TrueHD / DTS-HD via Converters, Transmits Up to 4K x 2K 328 ft Over CAT, Supports RS-232 and IR Control, 10.2 Gb/s Bandwidth, The Atlona HDBaseT DVI Transmitter & Receiver Kit from B&H is a Tx/Rx set designed with sensitive medical applications in mind. It features DVI input/output and the benefit of DVI's secure connector retention screws. It also supports up to Dolby TrueHD or DTS-HD embedded audio via optional DVI to
C2G TruLink HDMI over Cat5 Box Transmitter to Box Receiver Kit - Video/audio extender - up to 300 ft
This device allows you to broadcast your DVDs, CDs, MP3s, satellite/cable, gaming console, streaming video and more to any TV or stereo system in your home or office. Wirelessly Send Video to TV: Now you can easily stream high quality audio and video from one room to another, all without wires. Powerful Long Range 5.8GHz Signal: This system can broadcast audio/video up to 400ft (open space). It also transmits through walls, floors and ceilings with ease. Control Audio/Video Device from another Room: Any
Miller Edge MWRT12 Transmitter and Receiver Kit includes Miller Edge's MWT12 transmitter, and MWR12 single channel receiver combined into one convenient package. The transmitter is designed to provide wireless signal transmission from the safety edge to the motor controls. It is mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the information to the
C2G Short Range HDMI over Cat5 Kit (Receiver and Transmitter) - Video/audio extender - up to 164 ft
Simple to use, convenient and quick. 4 channels available. Without moving any audio-visual equipment which has been fixed, transmit the audio signal. Easy to enjoy the best audio-visual programmes in the other rooms.
Transmit clear visuals from your existing parking sensor or camera without a video cable using this Metra Install Bay TE-TXRX kit, which features a wireless transmitter and receiver for reliable communication on a 2.4GHz frequency.
To transform clear audio and video signal from the living room DVD / digital TV set-top boxes to the other audio signal TV which is in the other room and to watch wonderful movies with your family. The 2.4GHz 200mw 8 Channel Digital Wireless AV Transmitter and Receiver Kit SONGRI-24-100A will do these things for you. Made of high quality material, this wireless video transmitter receiver kit is durable enough for long time use. And the performance of this wireless video transmitter and receiver kit is very
Use your TV Ears headset with two TVs by setting up the secondary TV Ears 5.0 Digital Transmitter Kit. This add-on or replacement transmitter works just like the original digital transmitter, and connects to any television with digital audio outputs (analog optional). It is also compatible with Dolby, SRS, and PCM systems. How It Works: Connect the transmitter to the digital or analog outputs on the back of your second TV, and plug it into a power outlet with the included adapter. Now your headset can
All security equipment would like to thank you for taking the time to visit our eBay auction. We are a U.S. Based international wholesaler of security equipment specializing in Gate Operators, Access Control Equipment, Parking Systems, Surveillance / CCTV Equipment, Magnetic Locks and Electric Strikes. We promise excellent customer service, very competitive prices, quality products and fast shipping! You are bidding on 1 Miller Edge MGS20 Sensing Gate Safety Edge Kit Including 5' Safety Edge, T
VGA Plus Audio Over CAT5 Extender Kits (Transmitter and Receiver) - Wallplate
Boyo Vtx100 Wireless Module Kit
TruLink® VGA over Cat5 Extender Aluminum Wall Plate Transmitter to Box Receiver Kit
Video/audio extender - up to 300 ft
5. 8GHz 2000mW Wireless AV Transmitter: Transmitter Frequency / Channel Amount: 5705 5945MHz / 8CHOutput Power: 2000mW /33dBmTransmission Distance: Min. 8KM line of sightFrequency Control: Built in frequency phase lock loopAV input: bAnalog AV signal inputANT connector: SMA (needle inside) Power Supply: DC 7 12 voltsCurrent Supply: 1500mASize: 68*26*28mm Net weight: 70gGross weight: 85g5. 8GHz Wireless AV ReceiverReceiving Frequency: 5705 5945MHz / 8CHReceiving Sensitivity: 90dBmFrequency Control: Built in