This base adapter makes more LED lights to adapt your fixture or base rather than replace you lighting fixtures with a new one. The plug-and-play converter enables you to use standard base LED bulbs in candelabra sockets. You simply need to screw it in the E12 base socket to make it compatible with an E26/E27 base bulb. Advantages of this product including low heat generation, light in weight and easy to install. Be aware that by adding this adapter you will increase the lamp body's length by about 1.5
Eminence S2B-A Aluminum 1-3/8"-18 TPI Screw-On to 2/3-Bolt Horn Adapter S2B -A Eminence Speaker Convert a 1-3/8"-18 TPI screw-on compression driver for use with a 2 or 3-bolt 1" horn, or waveguide, with Eminence's S2B-A adapter. Adapts 1-3/8"-18 TPI screw-on compression drivers for use with 2/3-bolt horns and waveguides Robust cast aluminum construction Made in the USA 290-561 0.2500 lbs.
"Adapter Assembly, 3-1/2" Screw-On "
Wera Zyklop Ratchet, combines 5 ratchet types into 1 robust tool. Swivel head has defining lock points at 0, 15 and 90 degrees left and right, preventing the head from slipping, for reliable and safe working. Combination of freewheeling sleeve and rotating mass design turns nut or screw with unbelievable speed at 0 degree position. Add adaptor and bit and ratchet can be used as conventional screwdriver. Features easily accessible thumbwheel that reverses direction in any position. Sockets feature
SDS-plus shank, hex nut, male thread. Greatly replace the broken adapter with your drill chuc </ul>
Up for bid:Unimat 3 T-Slot Adapter Screw. New,Never Used This screw fits the T-Slot in the Unimat 3 cross slide, and has the same thread as the Unimat 3 Lathe spindle. Thus, you can take any Unimat lathe spindle accessory (such as faceplate, lathe or collet chucks) and mount the accessory into the Unimat cross slide! As a result, lathe and collet chucks offer extra versatility as precision circular vises, idealy suited for chucking and clamping workpieces for machining in the Unimat vertical Se
Shop for Power Tool Accessories at The Home Depot. The Milwaukee SDS/Chuck Adapter Kit features durable steel construction and includes a chuck adapter and 1/2 in. chuck to mount to your power tool. This kit includes a 1/2 in. all metal three jawed chuck (48-66-1360), an SDS to 1/2-20 thread adapter (48-03-3005), chuck screw (06-75-3150) and chuck key (48-66-3280). The kit increases the usefulness of your Rotary Hammer to allow you to use straight shank twist bits in a "drill only" mode.
Spiral bites into harder materials with increasing.Flutes embed deeper with each turn.Drive tool: Tap wrench, wrench, socket wrench, VISE-grip Locking pliers, IRWIN tap adaptors.HANSON 535 Spiral Flute Screw Extractor Set features spiral design for extra gripping power..Number of pieces: 5.Designed to remove broken studs, bolts, socket screws and fittings.Aggressive left hand spiral design for extra gripping power.Spiral flutes are designed to get embedded deeper into the metal as you turn the tool. As the
Designed to work with Blum Clip and Clip Top free swing hinges, the mechanism allows doors to open with a simple touch. Installation is quick and easy. SCREW-ON, 20MM SETBACK, DEPTH ADJUSTABLE
Greenlee 3/8" Screw Adapter Greenlee 3/8" Screw Adapter Brand: Greenlee | Product Code : 51300430 (White Cap # 1631614SS ) Description Greenlee Textron Screw Adapter, Specification: 0.375 in X 2.8125 in Size, For Hydraulic Drivers Specifications Greenlee Specifications : 0 .375 in X 2.8125 in Size For Hydraulic Drivers
Extensive bit set includes fastener removing bits for machine tool, household appliances and electronic repairs. Includes slotted, Phillips, metric/SAE hex, spline, spanner, metric/SAE hex tamperproof, Torx screw, Torx tamperproof screw and the new STAR 5-point security bits. Includes 1/4in.-drive swivel socket wrench and adapters. Pieces qty. 100, Storage Type Case, Drive in. 1/4.. Model Number: AT7110. UPC: 745227012725.
Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles. Mount a larger chuck on a smaller spindle for increased capacity. Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds. Metric screws included for mounting plate to spindle. Drive button is also included. Hardened and ground. Concentricity of 0.0002" TIR guaranteed.
Metalbest, 5RV-UAF, Type B, RV, Vent Pipe, Adapter, 5 Type B Gas Vent Female Universal Adapter from the RV Collection A universal adapter has both a male and female part to allow for exact connection. It is used to connect B Vent to/from 1/4 Type B Gas Vent. The RV series offers round gas vent pipe and fittings for residential, commercial and industrial applications. It features a snap together, non-positional lock system, die formed ends, and eliminates the need for all cutting, fitting and special
Six Lobed Spiral Bits are designed to remove rounded or stripped fasteners with internal drive heads. Four sizes of extractors fit Torx? and Torx Plus? sizes T-40 to T-55; internal hex sizes 1/4 to 1/2 and 6mm to 13mm. Will also work on other stripped or rounded internal drive screw heads. Made of heat-treated alloy steel for durability.
Allows user to use 1/4" and 3/8" drive sockets in drill for quick drilling of screws and bolts
Shop for Power Tool Accessories at The Home Depot. NOVA ILNS 1-1/4 in. 8TPI Chuck Insert/Adaptor allows you to 'adapt' your Insert Type NOVA Chuck to a 1 1/4 in. 8TPI Wood Lathe. Allows you to keep the same chuck and accessories if you change your wood lathe - you only need to change the insert/adaptor. The internal thread is 1-1/4 in. 8TPI and the external thread matches the NOVA insert type chucks, to simply and easily screw into the back of your NOVA Insert Type Chuck. This then makes your NOVA insert
Eminence B2S-A Aluminum 2/3-Bolt to 1-3/8"-18 TPI Screw-On Horn Adapter B2S -A Eminence Speaker Convert a 2 or 3-bolt 1" compression driver to a 1-3/8"-18 TPI screw-on compression driver with Eminence's B2S-A adapter. Adapts 2/3-bolt drivers for use with a screw-on horn Cast aluminum construction 1 -3 /8 " -18 TPI outer threads Made in the USA 290-563 0.2500 lbs.
3/8" sq dr adapter. 2" long. Securely holds 3/8" square drive sockets for easy driving of nuts and hex head screws. 1/4" shank fits all variable speed drills. Drive Size: 3/8", Length: 2", Shank Size: 1/4", Pkg Qty: 1, Package Type: Card
Welcome to Hawke's Leather! Home of superior products and top notch customer service! Check out some of our most popular categories! Get huge discounts on shipping charges when you purchase multiple items! Payment Shipping Combined Shipping Discount About Us Add us to your Favorites! Start Shopping Now! This auction is for (1)11380-01 10 Pack of Concho Knob Adapters with Screws Turn screw back conchos into drawer or door knobs with this attachment.If you have any questions about your order or o
Material: High carbon steel.Number of pieces: 9.Designed to remove broken studs, bolts, socket screws and fittings.Aggressive left hand spiral design for extra gripping power.Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool. As the fastener resistance increases, the extractor's grip increases.Extractor size and recommended drill bit size are etched on each tool.Includes: spiral EX -EX9.Spiral bites into harder materials with increasing.Flutes embed deeper with each
Plastic with metal screws to use Low Shank Screw On Feet or Ankle for Snap On Feet on High Shank Sewing Machines
Shaft Collar, Set Screw, Inside Dia. 1/8 In., Material 1215 Steal Lead Free, Black Oxide Finish, Withstand Temp. 350 Degrees F, Outside Dia. 3/8 In., Clearance Dia. 0.375 In., Width 1/4 In., Setscrew Location , Set Screw Size #632, Cap Screw Size , Screw Material Alloy Steel, , Package Quantity 3
Metalbest, 3RV-UAM, Type B, RV, Vent Pipe, Adapter, 3 Type B Gas Vent Male Universal Adapter from the RV Collection A universal adapter has both a male and female part to allow for exact connection. It is used to connect B Vent to/from 1/4 Type B Gas Vent. The RV series offers round gas vent pipe and fittings for residential, commercial and industrial applications. It features a snap together, non-positional lock system, die formed ends, and eliminates the need for all cutting, fitting and special
Number of pieces: 5.Extractor does not expand material that is being removed, thereby resulting in easier removal.Ideal for thin-walled materials such as pipe and fittings .Constructed of high carbon steel for strength under stressful conditions .Extractor size and recommended drill bit size are etched on each extractor.Includes: 5-pieces pouched, sizes ST- thru ST-5.Works on left-hand or right-hand threads.Drive tool: Tap wrench, wrench, socket wrench, VISE-grip Locking pliers, IRWIN tap adaptors.HANSON
Shop for Power Tool Accessories at The Home Depot. Use the power and speed of your 2.4 Volt Cordless Screwdriver to fasten or remove screws in light applications up to 400 RPM. A durable die cast construction accepts 1/4 in. magnetic bits. The Thumb Flange allows 360 degree rotation. Achieves a maximum of 100 in. pounds torque.