- Refine By >
Our Cat5E network kit has everything you need for a successful installation: 1000 feet of gray Cat5E UTP stranded PVC cable, RJ45 crimping tool, 50 modular plugs with RJ45 connectors, and the Multi-Network Cable Tester-E. This tester is specifically designed for quick testing of your network cables, and features high speed auto scanning for wire continuity, miswiring and polarization.Test installed cables with its compact remote terminator that conveniently slides into the master unit to prevent
StarTech.com's Advanced Network Cable Tester (RJ45) lets you test several long network cables faster and more efficiently than ever before. The network cable tester uses remote loop-back plugs, each with their own unique, easy-to-identify ID number. If several cables need to be tested, users can put a loop-back plug on the end of each cable run and go to the other end to test and identify each one. The network cable tester provides a basic continuity test with a pin-map that will identify wiring errors,
If you have a long fiber network, breaks can create a lot of issues, especially when you don't know where the break is. The Fluke Networks VisiFault cable continuity tester helps you identify exactly in which stretch of cable the fault is located, minimi.Fast answers: Supports 2.5mm and .25mm SFF connectors .Wavelength : 650 nm (visible wavelength), output power: ; 80 hours in continuous mode 2 x AA battery.Dimensions: 6.2(H) x 2"(W) x .3"(D).Temperature range: 0 - 40 deg C (operating), -20 - 60 deg C
Cable continuity tester is used to identify DC continuity or shorts in cables. This tool places a DC current through one end of cable and identifies the cable at the other end with the detachable tone detector. A Short circuit LED detector so if a short exists in the cable the LED lights up.
Feature Focus View larger The Perfect All-In-One Network Tester Tripp Lite’s heavy-duty, professional-grade N044-000-R Network Cable Continuity Tester for Cat5/Cat6, Phone and Coax Assemblies is the perfect all-in-one tester solution for every type of network connection. Consisting of a two piece transmitter and receiver, two BNC-F coax converters and coax terminator, the N044-000-R has you covered, no matter the cable type. When not in use, the N044-000-R’s contents can be stored away for better
This network cable tester is a must have for the IT professional. It checks up to four pairs of conductors for continuity and correct polarity for both RJ45 and BNC network cables. Check your system with the PHCT45!
Auto scanning for wire continuity, mis-wiring, open, short, straight-through or cross pinning
Trace Telephone Wire and LAN Cable- Trace Wires In Electrical System- Verify LAN Cable Condition- Continuity Test- DC Voltage Probe- Bright White LED Flashlight SKU: ALIAD1759 SKU: ALIAD1759
Troubleshooting timesaver test coax cable quickly and easily. The Coax Cable Continuity Tester is an easy to use tool for testing coax cable. With it you can check DC shorts, splitters and self-grounding devices in coax cable. An audible tone sounds wh
Cable testing cannot get any easier than with the Monoprice EZchecker 008 Cable Tester. This tester is a quick and easy continuity checker for RJ45 (STP and UTP), RJ12, and F-type and BNC Coax cables. It tests each conductor on RJ cables and instantly provides a pass or fail result, with an indication of which conductor is faulty in the event of a failure. The tester consists of two pieces: the Master unit and the Remote Terminator, which can be detached from the Master unit by sliding it off to the right.
NULL, The Paladin Tools HDMI Pro Cable Tester is designed for professional HDMI installations. This portable device allows installers to quickly test troubleshoot and verify HDMI cables. It is equipped with dual modes (CONTINUITY and SWEEP) and can either test the continuity or sweep the pins one by one and detect intercrossed pins. GENERAL -Installation & Maintenance Tools
Quickly and easily check for network cable continuity, faulty wiring, open, short, straight-through, or cross pinning with 4XEM's Multi-Functional Network Cable Tester. Features a quality design and durable two piece transmitter and receiver. Problem it solves:Troubleshoot and test RJ45 and RJ11 cables, eliminating hassle and getting the job done on time. 4XEM gear is respected industry wide for its high performance, premium quality and durability.
The Modular Patch Cable tester is used for Coax, Ethernet and Telephone cables. The tester has an RJ45/RJ11 port and remote tester. A BNC port and the BNC terminator is included for testing coax. By using a BNC adapter, many other coax cable types can be tested by this product. Features: LED Display Tests the following cables: RJ11/RJ45 10-Base-T AT&T 258A EIA/TIA 568 Token Ring Detects Continuity, Short, Open, and Crossed Wire Pairs Tests Cables Before Or After Installation Tests The Ground Of Shielded
NETest-E is designed to provide quick and clear results for testing network cable continuity and wiring configuration. It will detect the most common wiring faults on IA568A/568B, Token Ring, 10BASE-T, and 10/100BASE-T twisted-pair cables. The faults detected by the NETest-E include shorts, mis-wiring, reversed pairs, and shielding faults. Just plug a cable into the Main and Remote units and the NETtest-E will begin testing automatically. Features -Pair faults display by two colors LED -Main and remote
Black Box EZ Check Cable Tester - Network tester
The Multi-Modular Cable Tester is used for Telephone and Ethernet cables terminating with RJ45, RJ12 and RJ11 plugs. The tester has ports to accommodate most modular cables including: USOC 4, USOC 6, and USOC 8. The Multi-modular Cable Tester can also be used to tests whether the cable is crossed pinning or straight through. This product will test cables before or after installation. Features LED Display Tests the following cables: Telephone Cable Ethernet Cablle RJ45 RJ11/RJ12 Detects Continuity and
The TC-NT2 is a convenient and comprehensive cable tester for network professionals. Its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables. The TC-NT2 includes a master unit that transmits test signals to its corresponding remote terminator to verify cable reliability. It checks continuity and displays wiring configuration up to 300 meters of cable installation. With the unique feature of the audio tone
LANtest is a newly designed and very practical tester that can easily read the correct pin configuration of 10 Base-T cable (Category 5), 10 Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568 A/568B and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote kit it can test cables installed far away either on a wall plate or patch panel. It is easy to verify the cable continuity, open, short and cross-connect. - Lan Tester with Pin Configuration -
PatchTest Ethernet Cable TesterPatchTest is a battery powered network test tool that can be used to test patch cables for continuity and common wiring standards such as Gigabit Ethernet, Fast Ethernet and Fast Ethernet crossover. For remote testing of longer cables, the PatchTest can be used in conjunction with a Gigabit SuperLooper Loopback Jack. By using the LED lights the PatchTest will identify a Gigabit Ethernet straight through, 10/100 Fast Ethernet straight through, 10/100 Fast Ethernet crossover,
CBT-500 by Hosa Technology (Factory New) The CBT-500 Cable Tester by Hosa Technology diagnoses signal failure in cables terminated with any combination of XLR, Phone, Phono, and speakON and reg; connectors, as well as DIN, Ethernet, and USB Type A to Type B cables. It is also equipped with removable leads to verify continuity of additional connectors and jacks. Operation requires one 9-volt battery (included). CBT-500 Audio Cable Tester Continuity Test Battery Check (UPC 0728736053939 ) is listed under
The Multi-Network Cable tester is used for both Coax and Ethernet cables. The tester has a RJ45 port and remote tester. A BNC socket and BNC terminator is also included for coax testing. By using a BNC adapter, many other coax cable types can be tested by this product. The tester can also be used to test shielding. Features LED Display Tests the following cables: Coaxial Cable 10-Base-T AT&T 258A EIA/TIA 568 Token Ring Detects Continuity, Miss-Wiring, and Polarization Tests Cables Before Or After
StarTech LANTESTPRO LAN Cable Tester SKU # LANTESTPRO $130 .34 The StarTech.com Advanced RJ45 LAN Cable tester allows a single person to test several long cables faster and more efficiently than ever before. The tester uses remote loop-back plugs that each have their own unique ID number that the tester can identify. If several cables need to be tested, the user simply puts a loop-back plug on the end of each cable run and goes to the other end to test and identify each one. The tester provides a basic
TDR Cable Tester, Display LCD, Application Continuity and Length Testing, For Use With Network and Coax Cable, Features Cable Fault Finder, Tone Generator and Cable Manager, Measures Cable Length, Adapter Type BNC to F Connector, Insulated Push On FCconnector RO Alligator Clips, Insulated BNC Connector to Alligator Clips, Insulated Push on F Connector to RJ45 Modular Plug, Connector Type BNC, F Connector, Includes TDR, Adapter Cord Set, Batteries, and Carrying Case
Pyle - Network Cable Tester for Testing UTP, STP, BNC Coaxial, Telephone Continuity, Short Circuit, Open Connection, Length Test & Test Leads Included Parts: 1 year Labor: 1 year
Fluke Networks® VisiFault™ NF380 Cable Continuity Tester