- Refine By >
Siemens PL series of load centers is a premium, feature rich design. The load center is single phase, 120/240 Volt, 16 space, 24 circuit and comes with a factory installed 100 Amp main breaker, a combination surface/flush mount cover, and Copper bus bars
Siemens AFCI plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in single or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The combination type AFCI is for use in areas enforcing the 2008 or newer National Electric Code. Check with your local electrical inspector to confirm. The use of a double
Siemens PL series of Load Centers is a premium, feature rich design. All PL load centers are provided with a combination surface/flush mount cover and Copper bus bars. Features include being invertible for bottom feed applications, convertible from main lug to main breaker and vise versa, Insta-Wire and Visible neutrals, factory installed ground bars, pre-positioned bond screws, and trim hanging tabs.
Shop for Electrical at The Home Depot. The Siemens Industry Inc. 150 Amp 2-Pole Main Breaker Converter Kit is used to transform a main lug to a main breaker in Ultimate-style load centers. Main breaker is 150 Amp, 120/240 Volt, and has a 22 kA interrupting rating. Allows for a means of disconnect in a single switch for all circuits in your Siemens Load Center.
Siemens PL series of load centers is a premium, feature rich design. The load center is single phase, 120/240 Volt, 54 space, 70 circuit and comes with a factory installed 225 Amp main breaker, a combination surface/flush mount cover, and Copper bus bars
Shop for Electrical at The Home Depot. Install this Siemens 200 Amp 40-Space 40-Circuit Indoor Main Breaker Load Center inside your home for a single-phase, 240-Volt maximum distribution panel that includes a highly conductive copper buss bar. For convenience, this load center offers Insta-wire grounds and neutrals with factory-installed ground bars. UL listed and ANSI certified.
HJ3B250 250A 3 Pole 240/480/600V type/tipo ET-H Circuit Breaker made by ITE then Gould then Siemens. Amp range 70-400A, 600 Volt frame. Very popular breaker in Southern States. Presently out of production and termed Obsolete. A new generic knock-off brand is available. Not interchangeable with new generation model. Item is refurbished /Green .< /b > ;
Shop for Electrical at The Home Depot. This Siemens 100 Amp 12-Space 24-Circuit Outdoor Main Lug Load Center features a single-phase design and provides a 240-Volt maximum electrical capacity with a highly conductive copper buss bar. The NEMA 3R construction allows this load center to be installed outdoors. A UL listing and ANSI certification help ensure safe operation.
FXD63B150L, 3 Pole 150A 600V Siemens Sentron circuit breakers. This catalog number indicates field installable thermal unit. Breaker range is 70A thru 250A. Shunt trip devices and Auxliaries are also field installable. Mounting hardware is required for panelboard mounting, please consult for assistance.
1" wide 20 amp, 120/240 vac Interchangeable Not interchangeable with Square D Homeline panels 10,000 AIR Switch indicator Switch rated Class A ground fault protection-protects against electric shock produced by ground fault Plug-in Fits Siemens EC, Ultimate and MC Panels Standard overload and short circuit protection in Siemens load centers UL listed C.S.A. approved
Bolt On Circuit Breaker, 10 Amps, Number of Poles 1, Circuit Breaker Type Standard, AC Voltage Rating 120/240VAC, For Use With Siemens Panelboards, Series BQ, Terminal Connection Lug, Min. Wire Size 16 AWG (Cu), Max. Wire Size 10 AWG, Length 3.75 In., Width 1 In., Depth 3 In., Standards UL
Mfr Brand Name: Siemens/ITE Catalog No.: BQD3100 Product Name: Siemens/ITE, BQD3100, New, 480V, BOLT-ON CIRCUIT BREAKER Poles: 3 Amperage Rating: 100 Voltage Rating: 480 Long Description: MOLDED CASE, THERMAL MAGNETIC BQD FRAME 240 VAC/480 VAC STAR/277 VAC AT 60 HZ (UL) 100 AMPERE AT 40 DEG C 3 POLE INTERRUPTING RATING 65 KILOAMPERE AT 240 VAC, 14 KILOAMPERE AT 480 VAC STAR/277 VAC (UL) TERMINAL LOAD LUG SIZE 3 INCH W X 4.49 INCH H
Non-interchangeable trip. GFCI breakers are ideally suited for the protection of hot tubs spas and other large loads requiring GFCI protection. 120/240 volt. 50 amp rating.
Shop for Electrical at The Home Depot. The Siemens 100 Amp 20-Space 40-Circuit Indoor Main Breaker Load Center is equipped with an aluminum buss bar that helps support a 100 amp, 240-volt maximum rating. This main breaker load center provides a 100,000 Amp short circuit current rating when used with an appropriate main or feeder over-current.
Technical Specification Item Bolt On Circuit Breaker Amps 50 Number of Poles 3 Circuit Breaker Type Shunt Trip AC Voltage Rating 240VAC For Use With Siemens Panelboards Series B Terminal Connection Lug Min. Wire Size 8 AWG (Cu, Al) Max. Wire Size 6 AWG (Cu), 4 AWG (Al) Length 3.56 Width 3 Depth 3 Standards UL, CSA, NOM, HACR Rated AIR @ 240VAC 65kA Compliance & Restrictions Compliance and Restrictions This item is restricted for international sale. This listing is for each. _DELETE_
Single phase 3 wire split neutral 30 spaces and 40 circuits max 1-pole 14 max 2-pole 120/240 Volts ac. Factory installed 22000 AIR main breaker. May be installed on higher rated systems when protected by a circuit breaker feeder with a higher AIR rating. One piece plated aluminum bus bar. 100 percent circuit breaker twistouts. Positive load side circuit breaker hook rail. When used as service equipment any unused neutral position may be used for equipment grounding. Rotate entire device 180 degrees for
Siemens Pl Main Breaker Loadcenter 200A 30-40 Nema 1 Copper Bus
Circuit Breaker Enclosure, Flush, 100 Amps, Painted Finish, Material of Construction Steel, NEMA Rating 1, For Use With Siemens ED2, ED4, ED6, HED3 15-100A Circuit Breaker
Ring Type- Single Phase 120/240Vac- Includes Main Breaker- Overhead or Underground Feed- Surface Mount-Requires Type Rx Hub- For Use with Siemens Q Series (Qp Type) Circuit Breakers- 26-9/16 height x 14-1/2 width x 7-1/2 depth- SKU: HMREX1002
Siemens Q270 70 Amp Dual Pole Circuit Breaker Siemens Q270 70 Amp Dual Pole Circuit Breaker Features: Type QP Two pole, plug in Requires two 1 spaces HACR 120/240 volt AC 10,000 AIC 70 amp
Trim mounting tabs free up both hands to drive trim screws. 100A main breaker enclosed load center. Factory installed feed through lugs.