Digital Bench Multimeter, 400 uA to 10 A Amps AC, 400 uA to 10 A Amps DC, Basic DC Accuracy +/-0.025, 39999 Counts, True RMS Yes, Auto Ranging Yes, Safety Rating CE, Temp. Range -40 Degrees F to 1832 Degrees F, (-40 Degrees C to 100 Degrees C), Capacitance 40nF to 40 mF, Frequency Counter 40 Hz to 400 MHz, Special Features 4 to 20 mA Loop, RS232C and USB Interface, Double Backlit Display Display Features Amps DC: 400 uA to 10 A Resistance (Ohms) : 400 to 40 M Voltage (DC) : 40mV to 1000 V Auto Ranging: Yes
The Megger AVO310 digital multimeter is an average-sensing, auto-ranging meter for measuring current, voltage, and resistance in electrical testing applications. The meter comes with a set of detachable test leads that measure alternating current (AC) and direct current (DC) to 10 amp, AC voltage and DC voltage to 1,000 volts (V), and resistance to 40 megaohms. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. The
Shop for Electrical at The Home Depot. The Milwaukee 2217-20 Digital Multimeter offers a wide voltage range to 600 volts AC/DC and measures frequencies from 10Hz to 50 kHz. The heavy-duty True-RMS meter offers accuracy and durability with an easy-to-read white on black display and an over-molded dial for one-handed use. A slide rail system provides space for adding proprietary accessories.
Measures voltage, current, resistance and frequencyTests continuity and diodesBacklit LCD with 6,000 count displayTwo voltage detection modes - non-contact or using a single test leadBeep Jack warns when test leads are incorrectly inserted in current measurement terminalsAutomatic and manual range selectionRelative offset mode to see changes in measurementsData holdUse optional USB / RS-232 interface DMSC-2U for direct-to-PC loggingLifetime Limited WarrantyAccessories included: (2)1.5V AAA batteries, bead
Tests Unshielded, Shielded Net Wire, Telephone & USB Lines- Cabler Tester and Tests Audible Continuity- AC Voltage Measurement Range: 200~600V- DC Voltage Measurement Range: 200~600V- DC Current Measurement Range: 2mA~10A- Overload SKU: ALIAD3403
Hioki 3244-60 Card HiTester and digital multimeter is better contact test leads with tip pin length 15mm and gold-plated. Only 9.5mm (0.37 in) thick and 60g (2.1 oz) in weight. Full auto-ranging function and automatic power saving function. AC Voltage 50 to 500 Hz; DC Voltage 419.9mV to 500 Volt. Overload protection to 500 V at resistance or continuity functions. DC voltage: 419.9 mV to 500 V, 5 ranges, Basic accuracy: +/-0.7 percent rdg. +/-4 dgt. AC voltage 50 to 500 Hz: 4.199 V to 500 V, 4 ranges, Basic
The 500A Series were designed to provide all of the critical day-to-day features of hand-held multimeters in a smaller, ergonomic design. Look to this series for CAT IV 300V, CAT III 600V and CAT II 1000V applications and take advantage of AutoCHECK , EF-Detection, audible and visible alerts and a back-lit LCD display. Use the chart below to choose the model in this series that suits your needs the best. Backed by Greenlees lifetime limited warranty, the 500A Series multimeters offer the professional
Product Information: About The Amprobe DM7C Full Performing Digital Multimeter AC/DC The Amprobe DM7C Full Performing Digital Multimeter is a perfect tool for electrical testing in homes, boat, auto, RV or workshop. The Amprobe DM7C Full Performing Digital Multimeter features six functions and fourteen ranges and special ranges to test batteries. The Amprobe DM7C Full Performing Digital Multimeter is a full performing digital meter this is perfect for everyday applications. A division of Fluke Electronics,
Gardner Bender 62 Series Digital multimeter with rating of 200 - 500 VAC/DC has a digital LCD display. Multimeter measures electrical resistance ranging from 200 Ohms to 2 mille Ohms..Voltage: 200 - 500 V AC/DC.Electrical resistance: 200 Ohm - 2 MOhm.Display type: Digital LCD.Weight: 0.05 lbs..Gardner Bender 62 Series Digital Multimeter features a digital LCD display and has an electrical resistance ranging from 200-Ohm to 2-MOhm.
Clamp-on digital multimeter measures both AC and DC voltage up to 600 volts and AC current up to 400 Amps. Amps AC current to 400, Capacitance 3,000 EF, Resistance 40Mu, Volts AC/DC-600, Display Type Dual, Measures DC/AC, temperature, diode test....
The Eclipse MT-1210 is a Digital Multimeter. Features: DC and AC voltage measurement DC and AC Current measurement Resistance Measurement Capacitance measurement Diode and transister test Audible continuity test Whats In the Box: Eclipse MT-1210 Digital Multimeter
The Triplett 1101-B Compact Digital Multimeter is a digital multimeter (also known as a multitester) with 19 measurement ranges and functions including AC/DC voltage to 600V, DC current to 10 amp, resistance to 2 megaohms, and a continuity beeper and diode test. The included K-type thermocouple measures temperature to 300 degrees F, and with high temperature probe (not included) the meter can measure temperature ranges from -4 to +1,832 degrees F. The continuity beeper has a range of 0 to 2000 ohms and the
Shop for Electrical at The Home Depot. The Klein Tools Auto Ranging Multimeter measures AC/DC Voltage, resistance and continuity. Its easy-to-use functionality saves times. The durability handles even the roughest of jobsite environments. The MM500 is the tough meter for your tough jobs.
Features: 7 functions pen-type digital multimeter Large 3-3/4 digital LCD display with Bargraph Full function indication Diode and audible continuity Specifications: Model: DT-3218 Voltage DC: 600V, Accuracy: +/- 0.8% Voltage AC: 600V, Accuracy: +/- 1.2% Current DC: 340mA, Accuracy: +/- 1.5% Current AC: 340mA, Accuracy: +/- 2.0% Resistance: 30Mohm, Accuracy: +/- 3.0% Continuity: Diode Test: Test voltage max. 3.4V Dimensions: 220 * 40 * 33mm(H*W*D) Package includes: 1 * DT-3218 digital multimeter
RadioShack's True-RMS Digital Clamp-on covers all your hobby or professional needs. Test AC/DC voltage, current, measure resistance, capacitance, temperature and frequency. Continuity, autopolarity and overload protection for you and your meter. Plus, it meets UL600- Safety Requirement CATIII 600.
Craftsman Digital Multimeter Is All Charged UpYour Craftsman 11 function digital multimeter with auto ranging gives you information in a flash about your household voltage systems. Readings come up quickly on the large LCD screen so you know what you are dealing with on home repairs. From keeping your large appliances running at optimum levels to taking care of your car, this is the one tool that you must have in your home repair tool kit.Great for any electrician or DIYer inspecting the home, this
Digital multi-meter.20 Test ranges, 7 test functions .Continuity beeper.Fuse protected. 0 Amp test range.DC Volts 0-200mV, 2V, 20V, 200V, 000V.AC Volts 0-200V, 750V.Product Type: Meters.Overall Product Weight: Pounds.Includes: Test leads, protective holster, instructions and 9V battery
Clamp-on digital multimeter measures DC voltage up to 1000 volts and AC current up to 1000 Amps. Backlit for easy viewing. Volts Dc up to 1,000, Frequency 2kHz +- 2.0 percent, Jaw Opening in. 50 mm, Resistance 200 Ohms +- 1.0 percent, Amps AC to 1,000,...
5 functions 18 ranges Pocket size Built-in test leads Range hold button Continuity buzzer Autoranging Electronic overload protection Diode test Sampling rate: 2 times per second Ranges DC voltage: 0-400mV/4/40/400 /450 VDC AC voltage: 0-400mV/4/40/400 /450 VDC Resistance: 0-400/4K/400K/4M /40M UL listed to US and Canandian safety standards Auto shut off Checks outlets, fuses, wires, plugs, motors and electronic circuts
If you are looking for an insulation multifunctional AC clamp meter, here you have got a right place. This current clamp meter will satisfy you.The digital multimeter is perfect for professional or around-the-house use. This multifunction digital multimeter offers digital number for quick-changing or unstable signals. Secondary injection molding case. Made of high quality material, this digital clamp meter is durable enough for long time use. This digital clamp meter is light weight, handy and portable. You
The TPI 100 digital multimeter (also known as a multitester) is an average-sensing, auto-ranging meter that measures voltage and resistance, and performs continuity tests in electrical applications. The meter is designed to perform resistance measurements for motor windings, transformers, solenoids, elements, and electrical heater cores. It can be used to measure line and control circuit voltages, and verify voltage at breakers and outlets. An audible continuity sensor confirms a circuit conducts
The 2712 is a full featured auto ranging True RMS Digital Multimeter that combinesperformance , value and functionality. The 40000 count LCD has a green back light that allows the meter to be used in dimly lit environments. The 2712 can measure resistance values up to 40Mohm and capacitance to 40uF. With the auto power off feature you wonÂt have to worry about accidental battery consumption. Value-packed features make this meter a must in every tool kit.
A precise and reliable multimeter. This 9-range digital multimeter is a compact, auto-ranging, digital multimeter ideal for testing in the field, lab, shop or home. It measures AC and DC voltage up to 600V, AC and DC current up to 0A, resistance up to 40M ohm, and tests .5V C, D, AA, AAA and 9V batteries.
Digital Multi Meter with rubber holster.Audible continuity test.Data hold.Back lit.Power source: 6F22(9V) x .AC voltage: 200 / 600V+ / - .2%.DC voltage: 200m / 2 / 20 / 200+ / -0.5%, 600V+ / -0.8%.Fuse 200mA / 250V.5.44'' H x 2.72'' W x .25'' D.Product Type: Meters.Overall Length - Side to Side: 2.72 Inches.Overall Height - Top to Bottom: 5.44 Inches.Overall Depth - Front to Back: .25 Inches.Overall Product Weight: 0.76 Pounds
"Large, easy to read LCD displayAuto and manual rangingData holdMAX capture function for inrush current measurements (30 mS response)Diode test Where accuracy, quality, and newest technology meet. The APBACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with Red, Rubber, Ribs design.? With relative zero mode, auto power off, audible continuity and accommodates conductors up to 2.00"" in diameter. ""Third hand"" test probe holder. Rubber over-molded case
The Eclipse MT-1270 is a Digital Multimeter. This multimeter is used to check electrical currents. Features: Auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements Safe for automotive and household uses Large color-coded LED digital display Designed to test AC or DC voltage batteries AC and DC currents resistance diodes and continuity Color-coded LED's display battery quick check What's In the Box: Eclipse MT-1270 Digital Multimeter
Kit includes: VT201A Non contact Voltage Detector, PM-60 Digital Multimeter, and ST102A Polarity Cube. PM-60 Digital Multimeter: measure AC/DC voltage; continuity function checks light bulbs and fuses; resistance, capacitance, and frequency for advanced. VT201A Non-contact Voltage Detector: quickly checks voltage.
Greenlee DM-820A Digital Multimeter - Trms, Ac/Dc,Cap,Temp Features: True RMS for no-compromise accuracyMeasures voltage, current,resistance, Capacitance And FrequencyTests Continuity And DiodesBacklit LCD With Dual 10,000 Count DisplaysBeepJack Warns When Test Leads Are Incorrectly Inserted In Current Measurement TerminalsAutomatic And Manual RangeSelectionvRelat Offset Mode To See Changes In MeasurementsData HoldUse Optional USB InterfaceDMSC-9U For Direct-To-PC LoggingLifetime Limited WarrantyCrest
Digital Multimeter, Full Size, Max. Ac Volts 750, Max. Dc Volts 1000, Max. Ac Amps 20, Max. Dc Amps 20, Max. Ohms 20 Megaohm, Basic Dc Accuracy +/-0.3 Percent, Counts 4000, Battery Type 9v, Safety Rating Cat Iii 600v, Audible Continuity Yes, Ac Response True Rms, Data Hold Yes, Display Lcd, Auto Ranging Yes, Temp. Range -4 To 1382 F, Duty Cycle 0.1 To 99.9 Percent, Diode Test Yes, Auto Power Off Yes, Calibration Certificate Optional
Digital Multimeter, Pocket, Max. AC Volts 600, Max. DC Volts 600, Max. AC Amps 10, Max. DC Amps 10, Max. Ohms 40 megaohm, Basic DC Accuracy +/0.5 Percent, Counts 4000, Battery Type 9V Alkaline, Safety Rating CAT III 600V, Audible Continuity Yes, AC Response Average, Capacitance Range 100uF, Frequency Counter Range 10 MHz, Display LCD, Auto Ranging Yes, Temp. Range 1400 Degrees F (760 Degrees C), Special Features Non Contact Voltage Detector, Relative Mode, Duty Cycle 0.1 to 99.9 Percent