Turn a 3.5” SATA HDD into an external upright UASP-supported Hard Drive with built-in fan The S3510BMU33B 3.5in SATA hard drive enclosure lets you add external storage to your computer by connecting a 3.5" HDD through an available USB 3.0 port. Enhanced with UASP (USB Attached SCSI Protocol), this enclosure lets you get the most out of your SATA III hard drive with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for
To maximize portability, the enclosure features a built-in USB 3.0 cable, and requires no external power adapter ensuring minimal external accessories. The cable tucks safely and discreetly away while the device is not in operation, to prevent damage or tangles. To better utilize the full potential of your SATA III SSD/HDD the enclosure supports UASP, which allows for transfer speeds up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results
Turn a 2.5in Sata hard drive into a USB2.0 or eSata external hard drive. This eSata/USB External Hard Drive Enclosure transforms virtually any 2.5 Sata (Sata Sata II Sata III) hard drive or solid state drive (SSD) into a cost-effective portable storage solution.Ideal for storing digital multimedia and other demanding applications the 2.5 Sata hard drive enclosure connects to a host computer using USB 2.0 or eSata with support for data transfer rates of up to 3Gbps (using eSata) or 480Mbps (through USB 2.0).
Turn an Internal 3.5" SATA or IDE Hard Drive into an External USB/eSATA Hard Drive. StarTech.com"s InfoSafe UNI3510U2EB eSATA/USB to SATA/IDE External Hard Drive Enclosure delivers a versatile and cost-effective external storage solution, letting you turn any 3.5" Serial ATA (SATA, SATA II, SATA III) or IDE hard drive into an eSATA (SATA only) or USB 2.0 (SATA or IDE) connected external storage solution for high capacity drives (tested with up to 4TB). The External hard drive enclosure features a large
Turn A 3.5” SATA Hard Drive Into A UASP-supported USB 3.0 External Hard Drive The S3510SMU33 USB 3.0 hard drive enclosure enables you to connect a 3.5in SATA hard drive through an available USB port. Maximum durability, with aluminum housing View larger Product Features And Applications Take advantage of new laptops and desktops with USB 3.0 (UASP) connectivity Turn a high capacity SATA hard drive into portable, external storage Create a fast, portable external storage solution for desktops, laptops, or
Vantec introduces the NexStar CX 2.5 SuperSpeed USB 3.0 External Hard Drive Enclosure, ideal for anyone in need of storing and transferring large amounts of data. Support all the latest 2.5 hard drive -- 7mm, 9.5mm, 12.5mm, SSD; this enclosure does it all. Integrated with the latest USB 3.0 technology, performance is increased by 10 fold offering maximum speeds of up to 5 Gbps. In addition, the sleek aluminum casing not only protects the drive from overheating but also provides sound dampening qualities to
SIIG USB 3.0 to IDE/SATA 6Gb/s 2.5" Enclosure - Storage enclosure with screwless design - 2.5" - ATA / SATA 6Gb/s - 600 MBps - USB 3.0 - black/dark silverSIIG's USB 3.0 to IDE/SATA 6Gb/s 2.5" Enclosure is a high quality product designed to accommodate 2.5" IDE/SATA hard disk drive to easily add more storage space to your USB 3.0 enabled desktop or notebook computer. Its unique dual hard disk interface supports IDE or Serial ATA (SATA) 2.5" hard disk drives and supports USB 3.0 data transfer rate up to
For 3.5" (89mm) SATA I/II/III HDDs, USB, eSATA & FireWire Interfaces, Transfer Rates up to 6 Gb/s, Horizontal/Vertical Positioning, Hot Plug and Play, Power/Data Status LEDs, The 3.5 G-S350SU3B2 eSATA USB 3.0 FireWire 400/800 Storage Enclosure from Macally is designed for 3.5 (89mm) SATA I SATA II and SATA III hard disk drives. It is made of a solid aluminum body that provides heat dissipation and reliable hard drive protection. It supports USB 3.0 (5 Gb/s) and USB 2.0 (up to 480 Mb/s) host connections. It
The TowerRAID TR4U+B is an 4-bay storage enclosure for high capacity storage needs. With a built-in ventilating protective screen front panel, both units utilize a cable-less backplane-design to support up to four hard drives. Connecting to the USB 3.0 slot for 5Gb/s performance, 4 hard drives can be accessed at the same time using a single USB 3.0 cable. Backwards compatible with USB 2.0, the TR4U+B provides expandable storage with ease. Hard drives are installed on easy access hard drive trays for simple
Turn a 2.5 SATA Hard Drive or Solid State Drive into a UASP supported USB 3.0 External Hard Drive. The S2510BPU33 USB 3.0 Hard Drive Enclosure with UASP lets you connect a 2.5in SATA III hard drive (HDD) or solid state drive (SSD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with USB 2.0/1.1 host connections as well.Enhanced with UASP (USB Attached SCSI Protocol), this 2.5 SATA III enclosure performs up to 70% faster than
USB 3.0/eSATA Dual 3.5" SATA III Hard Drive External RAID Enclosure w/ UASP and Fan - White Serial ATA/600 Controller - RAID Supported - 2 x Total Bays ExternalProduct Type: DAS Array RAID Levels: Concatenation Form Factor: External
Backup and Transfer Data at SuperSpeed USB 3.0 speeds. The SAT3510BU3 USB 3.0 External Hard Drive Enclosure lets you connect a 3.5in SATA hard drive through USB 3.0 - a cutting edge external storage solution that lets you harness the speed and performance supported by the SuperSpeed USB interface. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer's storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access
StarTech.com USB 3.0 Trayless External 3.5" SATA III HDD Enclosure w/ UASP - White SKU # S3510WMU33T $43 .49 Easily connect and hot swap 3.5in SATA hard drives, with an external UASP-supported USB 3.0 white enclosure . StarTech .com Package Contents USB 3.0 Trayless External 3.5" SATA III HDD Enclosure w/ UASP - White 1 x USB 3.0 Cable 1 x Universal Power Adapter (NA/UK/EU) 1 x User Manual Drive Interface Serial ATA Manufacturer Part Number S3510WMU33T Controller Type Serial ATA/600 Input Voltage 220
Easily access your bare Hard Drive data without having to open up an enclosure. Simply slide your 2.5" or 3.5" Sata bare drive into the universal docking slot and you can instantly access all your data. With Hi-Speed USB 2.0 connectivity you can enjoy blazing fast transfer speeds. There is no software to configure and most Operating Systems are supported. This is a great solution for test benches or anyone wanting instant access to their hard drive data. The AHDDS100F is also a great solution to test any
SIIG's 3.5 USB 2.0 to SATA Enclosure is a high quality product designed to accommodate 3.5 SATA hard disk drive through USB 2.0 interface to work with your desktop or notebook computer. This hard disk drive enclosure supports SATA hard disk drive of up to 2 TB in capacity and delivers data transfer rates of up to 480Mb/s. User friendly features such as driver-free installation and hot-swapping, allowing you to connect and disconnect the enclosure without first turning your system off, makes this an
Vantec introduces its NexStar CX 3.5 SATA External Hard Drive Enclosure. Ideal for anyone in need of storing and transferring large amounts of data, the NexStar CX is a convenient way of upgrading storage to your computer. The NexStar CX turns any internal 3.5 SATA Hard Drive into an external hard drive that can be used on any system with a USB port. In addition, the aluminum casing protects the drive from overheating and vibration. The NexStar CX supports USB 1.1 and USB 2.0 to offer fast transfer speeds
Turn a 2.5" SATA HDD/SSD into a 3.5" SATA Drive. The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive. The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The enclosure has the same dimensions as a standard 3.5" hard drive, including mounting points, and SATA connector locations.
SAT3520U3R Dual 3.5in USB 3.0 Hot aSwap Trayless SATA Hard Drive Enclosure with Fan RAID Supported - 2 x Total Bays - USB 3.0 ExternalProduct Type: DAS Hard Drive Array RAID Levels:0 Form Factor: External
Create new storage solutions to transfer, share and archive important data. Install an idle or new hard disk drive into a MANHATTAN SATA 2.5'' Hard Drive Enclosure with SuperSpeed USB to expand storage capacities for desktop and notebook computers. With support for large-capacity 2.5-inch SATA drives and SuperSpeed USB USB 3.0 data transfer rates of up to 5Gbps, the MANHATTAN Drive Enclosure helps optimize high-performance personal computer storage applications. A convenient built-in, one-touch copy feature
Slim Aluminum Casing - Ensures Maximum Mobility with Rigid Protection and Excellent Heat Dissipation Hairline surface treatment, provides a high quality finish. Supports USB 3.0 SuperSpeed - Maximum Transfer Rate up to 5.0 Gbps. Backward-Compatible with USB 2.0 (Max: 480 Mbps) & 1.1 (Max: 12 Mbps). Plug & Play Installation - Ready to Work in seconds, No Software or power cord needed. Supports 2.5" SATA I/II/III Technology Hard Drives or SSD's. Windows & Mac OS Compatible.
The 3.5Â USB 3.0 External Enclosure, model TU3-S35, supports one 3.5Â SATA I or II hard disk drive with storage capacities in excess of 1 Terabyte (hard drive sold separately). Store and transfer content at 5Gbps USB 3.0 speedsÂ10 times faster than USB 2.0. Install a SATA I or II hard drive and connect the enclosure to a 5Gbps USB 3.0 port on your computer. USB 3.0 is backward compatible with USB 2.0 ports. Large cooling vents and an aluminum housing cool the enclosed hard drive. An included mounting
Thermaltake ST0020U Max5G Hard Drive Enclosure The Thermaltake ST0020U Max5G Hard Drive Enclosure supports all SATA 3.5" drives up to 2TB. The Thermaltake ST0020U Max5G Hard Drive Enclosure also provides active cooling with two 80mm Blue LED fans. The Thermaltake ST0020U Max5G Hard Drive Enclosure features blazing file transfer speeds up to 5Gbps thanks to its USB 3.0 interface, making it 10x faster than USB 2.0. The Thermaltake ST0020U Max5G Hard Drive Enclosure includes shielded USB 3.0 cable to ensure
Create an external dual 3.5in HDD SATA RAID array connected through either USB 3.0 with UASP or eSATA. The S3520BU33ER 2-Bay RAID Enclosure offers a high-performance external storage solution enabl...
Our 3.5in. External USB 2.0 Hard Disk Drive Enclosure is the perfect choice for storage solutions. Designed to support the latest and fastest ATA133 (IDE) hard drives, this external 3.5in. conversion kit uses both USB 2.0 interface to connect to PC computers. With a maximum transfer rate of 480MB/s, you're guaranteed superior performance. Just connect the drive to any USB port and immediately have access to data and multimedia files or even entire operating systems.Package Contents:; USB 3.5in. External
StarTech.com 2.5" SATA to Mini SATA SSD Adapter Enclosure 13480365 SAT2MSAT25 Fits virtually any full-length mSATA Solid State Drive into an housing that is identical to a standard 2.5" SATA drive! Specs The 2.5" SATA to Mini SATA SSD Adapter Enclosure turns an mSATA (Mini SATA) mini-SSD into a standard 2.5" SATA SSD for use anywhere a 2.5" SATA drive can be used. Featuring all of the standard mounting points that a normal 2.5" hard drive uses, the converter can be installed into External Hard Drive
Vantec introduces the NexStar TX 2.5" SuperSpeed USB 3.0 External Hard Drive Enclosure, ideal for anyone in need of storing and transferring large amounts of data. Support all the latest 2.5" hard drive -- 7mm, 9.5mm, 12.5mm, SSD; this enclosure does it all. Integrated with the latest USB 3.0 technology, performance is increased by 10 fold offering maximum speeds of up to 5 Gbps. In addition, the sleek aluminum casing not only protects the drive from overheating but also provides sound dampening qualities
Supports 2 x 3.5" SATA I/II/III HDD, USB 3.0 Host Interface, USB 3.0 Data Transfers up to 5 Gb/s, Backwards Compatible with USB 2.0, Built-In Hardware RAID Controller, RAID 1, RAID 0, BIG & JBOD Support, 40mm Fan with Adjustable Speed Control, LED Indicators, Aluminum Body Construction, Works with Windows and Mac Systems, The white ICYRaid MB662U3-2S 2-Bay USB 3.0 3.5 SATA HDD RAID Enclosure from Icy Dock enables two SATA 3.5 hard drives to be connected simultaneously to a computer through USB 3.0 interface
Turn a 2.5in SATA SSD/HDD (up to 12.5mm) into a UASP-supported USB 3.0 External Drive The S2510SM12U33 USB 3.0 to SATA hard drive enclosure with UASP enables you to connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB port. UASP provides time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported host (this is evident in the test data that can be found below). *Note: testing results were obtained using an Intel Ivy Bridge
The MobileSTOR MS1UT+B Series is a unique external 3.5 SATA Hard Drive enclosure with a removable HDD tray. The combination of fanless design and aluminum housing provide quiet yet cool operation. With portability in mind, the compact MS1UT+B weighs only 2.2 lbs. The removable hard drive tray is interchangeable with certain MobileSTOR or MobileRAID series models to provide ultimate compatibility between various units. With support of high performance SuperSpeed USB 3.0 Interface , as well as eSATA 6G
Turn a 2.5" SATA Hard Drive or Solid State Drive into secured external storage with password entry - The S2510BU3PWPS USB 3.0 HDD Enclosure features keypad Encryption, enabling you to turn almost any 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into an AES-encrypted external hard drive. The enclosure supports large capacity hard drives (tested with up to 1TB), maximizing system storage expansion and backup capabilities. Using an Advanced Encryption Standard algorithm (256-bit AES), all of the