TRENDnet 100Base-TX to 100Base-FX Multi Mode SC Fiber Converter The TRENDnet 100Base-TX to 100Base-FX Multi Mode SC Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode SC-Type fiber converter span
StarTech.com 10/100 fiber to Ethernet media converter multi mode. Converts to/from 10Base T or 100Base Tx Ethernet signals and 100Base Fx optical signals
This MM Fiber to Ethernet Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while
Ethernet to Fiber Cable Converter, 10/100Base-TX UTP/STP Compatible, ST-Type Multi-mode Fiber Port, Connect Up to 1.25 miles, The 100Base-TX to 100Base-FX Multi-Mode ST Fiber Converter from Trendnet allows you to dramatically increase the range of your network devices. By converting the 10/100Base-TX based data signal to fiber cables devices and networks can communicate from over a mile away. The converter automatically determines connection speed and auto-negotiates half- or full-duplex mode. COMPUTER
TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100BaseTX UTP/STP media to 100BaseFX media and vice versa.
This industrial grade 10/100 Multi Mode Fiber Ethernet Industrial Media Converter converts between 10 Base-T or 100 Base-TX electrical Ethernet signals and 100 Base-FX optical Ethernet signals to p...
Omnitron iConverter Managed fiber converter includes two ST ports for access ability. Converter measuring 2.8 x 0.9" x 4.8" is compatible with Omnitron Chassis, 9-module, 5-module, 2-module, -module . .Interfaces /ports : 2 x ST ports.Dimensions: 2.8"(H) x 0.9"(W) x 4 .8 " (D ) .Compatibility : Omnitron Chassis, 9-module, 5-module, 2-module, -module.Data transfer rate: 00 Mbps.Ethernet technology: Fast Ethernet.Form factor: Internal.Fiber type: SMF, MMF, Media type supported: optical fiber.AC power: 00 -
The Cisco 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter is a hot-swappable device that plugs into a Gigabit Ethernet SFP port on Cisco Catalyst 3750 Series, 3560 Series, and 2970 Series switches. The Cisco SFP provides full-duplex 100-Mbps connectivity between switches over multimode fiber (MMF) infrastructures. It offers investment protection and an easy migration path for customers moving to Gigabit Ethernet connections in the future. Cisco 100BASE-FX SFP Fast Ethernet
IEEE 802.3 10Base-T Compliant, IEEE 802.3u 100Base-TX / 100Base-FX, Ethernet Frame Size Up to 1522-Byte, 1,310 nm Wavelength, 1 x 10/100Base-TX / 1 x 100Base-FX Ports, Max 200 Mb/s Transfer Rate (Full-Duplex), Power / Link / Full-Duplex / Speed LEDs, The 100Base-TX to 100Base-FX Single Mode SC Fiber Converter from TRENDnet features one 10/100Base-TX and one 100Base-FX port along with support for up to 100 Mb/s data transfer speeds in half-duplex and up to 200 Mb/s data transfer speeds in full-duplex modes.
Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet. Auto MDI/MDI-X. UTP port auto-senses network speed. Switch selectable half or full duplex operation on the fiber port. Fiber lengths up to 2 km. 2 Power Choices - AC-DC Adapter or USB. 5 LED Function lights. Uses 62.5/125 or 50/125 Multimode cable. 3.75 L x 2.75 W x 1 H. Wavelength: 1310nm. Supports Link Fault Pass-through (LFP) for easy tracing of network link failures.
&bull ;Interfaces /Ports •Total Number of Ports: 2 •Network (RJ-45): Yes •Number of Network (RJ-45) Ports: 1 •Media & Performance •Media Type Supported: Fiber •Media Type Supported: Twisted Pair •Fiber Mode Supported: Multi-mode •Maximum Distance Supported: 1.24 Mile •Network & Communication •Ethernet Technology: Fast Ethernet •Network Technology: 100Base-FX •Network Technology: 10/100Base-TX •Physical Characteristics •Form Factor: Wall
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector.
: Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards; One 10/100Base-TX auto-negotiation RJ-45 port; Auto-negotiation 10/100Mbps connection speed and Half/Full-duplex mode on TX port; Auto MDIX for 10/100Base-TX port; One 100Mbps fiber port with Multi-mode SC-Type Connector Half / Full-Duplex mode selector on Fiber port; Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed; Wall-Mountable; Optional 19" system chassis with redundant power supply (TFC-1600),
TRENDnet TFC-15MS100 100Base-FX Multi-Mode to Single Mode SC Fiber Converter The TRENDnet TFC-15MS100 100Base-FX Multi-Mode to Single Mode SC Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This Multi Mode to Single Mode SC
TRENDnet TFC-110S60 100Base-TX to 100Base-FX Single Mode SC Fiber Converter, 60KM /37.2Miles The TRENDnet TFC-110S60 100Base-TX to 100Base-FX Single Mode SC Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is
Technical Information: Standards: IEEE802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX Supported Frame Size: Standard Ethernet up to 1522-Byte Network Media: 100Base-TX: Cat. 5, EIA/TIA-568 100-ohm UTP/STP, up to 100 meters. 100Base-FX: Single-Mode fiber optic cable 9/125 or 10/125 ?m, up to 30 Km. Wavelength: 1300nm Protocol: CSMA/CD Ports: 1 x 10/100Base-TX 1 x 100Base-FX Data Transfer Rate: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex) Diagnostic LEDs: Power, Link/Activity, Full-Duplex, and Speed
Design for optical fiber network deployment for extending a copper base network via fiber cables. 10Base-T & 100Base-TX transmits signal up to 100 meters. 100Base-FX transmits signal in multimo...
The 10/100BASE-TX to Multimode 100BASE-FX Mini Converter from Cables To Go helps ensure smooth implementation or easy expansion of a Fast Ethernet network. The converter is completely transparent, so the network performs exactly as it did before. It now provides for the coexistence of both copper and fiber media, allowing the installation of fiber cabling anywhere within the network topology by connecting to existing devices. Its compact modular design facilitates space-saving deployment in a narrow desktop
IMC MiniMc Twisted Pair to Fiber Media Converter - 1 x RJ-45 10/100Base-TX Duplex 1 x SC 100Base-FX - UTP Fiber - Media Converter
TRENDnet 100Base-TX to 100Base-FX Multi Mode MT-RJ Fiber Converter 8541987 TFC -110MM MT -RJ type multi-mode fiber port connects over distances of up to 2km. Specs Ethernet 100Base-FX, Ethernet 100Base-TX Ethernet 10Base-T Cabling Supports IEEE 802.3, IEEE 802.3u Networking Data Transfer Speeds up to 200MB/s The TFC-110MM Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode MT-RJ Type fiber converter spanning distances up to 2km (1.2 miles). Ports
TRENDnet TFC-110S30 10/100BASE-TX to 100BASE-FX Single-Mode Fiber Converter TRENDnet TFC-110S30 10/100BASE-TX to 100BASE-FX Single-Mode Fiber Converter TFC -110S30 CDW Part: 575456 UNSPSC: 43222608 10 /100BASE -TX to 100BASE-FX Single-Mode Fiber Converter (30Km) with SC-Type Connector 10 /100BASE -TX to 100BASE-FX Single-Mode Fiber Converter (30Km) with SC-Type Connector TRENDnet 's TFC-110 series Fiber Media Converter transforms 10/100BASE-TX UTP/STP media to 100BASE-FX media and vice versa. The
TRENDnet 100Base-TX to 100Base-FX Single Mode Fiber Converter: 1 x RJ-45 1 x SC 10/100Base-TX, 100Base-FX </ul>
AddOncomputer.com 100Base-TX To 100Base-LX ST SMF 1310nm 20km Media Converter SKU # ADD -FMC -FX -2ST $98 .39 ADD -FMC -FX -2ST is a Media Converter that converts a 100Base-TX(RJ45) to 100Base-LX(ST) via a 1310nm single-mode fiber (SMF) ST connector, which allows distance reach up to 20km. ADD-FMC-FX-2ST provides a cost effective conversion from 100Base Copper to 100Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper. Addoncomputer.com Media Converters and Network
TRENDnet 100Base-TX to 100Base-FX Single Mode Fiber Converter: 1 x RJ-45 1 x SC duplex 10/100Base-TX, 100Base-FX </ul>
TRENDnets TFC-110MSC Fiber Media Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speed auto-negotiate...
Transition Networks 10/100 Bridging 10/100Base-TX to 100Base-FX Media Converter SKU # SBFTF1011 -105 -NA $184 .11 The SBFTF10xx-10x 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or 100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base-FX Fast Ethernet fiber network. Total Number of Ports 2 Manufacturer Transition Networks, Inc Network (RJ -45 ) Yes Manufacturer Part Number SBFTF1011 -105 -NA Network Technology 100Base -FX
The TFC-110MM Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode MT-RJ Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (MT-RJ Type).
Transition's AC powered PoE media converters combine data received over a fiber optic link with -48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af™: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include
The TFC-110MSC Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode SC-Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type).