This 8 Port VGA over Cat5 video extender/splitter allows up to 8 (1 local and 8 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable at distances of up to 300m (950ft) away from the signal source. At each remote monitor an STUTPRXL receiver or STUTPRXWAL wall plate receiver(see accessories) is required. The receivers convert the signal from the UTP cable back into VGA video for the monitor.
STARTECH.COM 8-port cat 5 vga video splitter distribution amplifier extender (#ST128UTPE) (retail)
The StarTech.com 4-Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Cat5 UTP cable using RJ-45 connectors and supports distances of up to 980 feet. At each remote monitor, a receiver (PCC Item #6500321, sold separately) is required to convert the signal from the UTP cable back into VGA video for the monitor. Typical applications are: airports, bus depots, factories, or any large
The STUTPEA4X is the 4-Port Line Splitter utilized by our STUTPEA VGA and Audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage soluti...
This 4 Port VGA over Cat5 video extender/splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single VGA source. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable using RJ45 connectors and supports distances of up to 300m / 950ft. At each remote monitor an STUTPRXL receiver or STUTPRXWAL wall-plate receiver is required. The receivers convert the signal from the UTP cable back into VGA video for the monitor.verge A/V to provide you with digital
Tripp Lite B132-100 is the display side remote unit, used in conjunction with B132-004, 4-Port VGA over Cat5 splitter.
Type: Video Converter TV Standards: No FM Tuner: No Features: Consists of 1 Base unit for distributing 8 ports through Cat5 and two VGA ports for local displays. Extends video cables by up to 500 ft. (150m) Provides crystal clear picture quality Pure hardware design, no software or drivers required and easy to install Supports VGA, SVGA, and Multisync monitors Use repeaters along your path Ports In: 4 x High Density DB15 (Female) 4 x 3.5mm Stereo Audio Ports Out: 4 x High Density DB15 (Female) 4 x 3.5mm
Minicom 4-Port CAT5 UTP VGA Splitter - 1 x 15-pin D-Sub (HD-15) Monitor - 1280 x 1024 @ 75 Hz, minicom 4-port cat5 utp vga splitter - 1 x d-sub (hd-15) monitor - 1280 x 1024 @ 75 hz - svga, xga 10498152 j96454 0vs22004 43211601 0654518400311 320047 euq kv h xc596438c j96454 1900584
4PORT VGA OVER CAT5 EXTENDER/ - SPLITTER W/ AUDIO TRIPPLITE 4PORT VGA OVER CAT5 EXTENDER/ - SPLITTER W/ AUDIO - B132-004A
The StarTech.com 8 Port UTP Video Extender/Splitter allows up to 9 (1 local and 8 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard Category 5 UTP cable using RJ45 connectors and supports distances of up to 980 Ft. At each remote monitor an STUTPRXL receiver (each sold separately) is required to convert the signal from the UTP cable back into VGA video for the monitor. Typical applications are: airports, bus depots, factories, or any large buildings
The StarTech.com 4-Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Cat5 UTP cable using RJ-45 connectors and supports distances of up to 980 feet. At each remote monitor, a receiver (PCC Item #6500321, sold separately) is required to convert the signal from the UTP cable back into VGA video for the monitor. Typical applications are: airports, bus depots, factories, or any large
The Converge A/V 4 Port VGA over Cat5 video extender/splitter allows up to 5 monitors to be connected to a single VGA source.
Startechcom 8-Ports Cat 5 VGA Video Splitter Distribution Amplifier Extender ST128UTPE
The StarTech.com 8 Port UTP Video Extender/Splitter allows up to 9 (1 local and 8 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard Category 5 UTP cable using RJ45 connectors and supports distances of up to 980 Ft. Typical applications are: airports, bus depots, factories, or any large buildings where video needs to be delivered at long distances.
> Tripp Lite VGA over Cat5 Remote Unit Extender/Splitter - 4-Port Tripp Lite VGA over Cat5 Remote Unit Extender/Splitter - 4-Port Mfg. Part: B132-100 | CDW Part: 1754038 | UNSPSC: 43201614 100 VGA Over Cat5 Extender/Splitter Remote Unit - Video extender - external - up to 500 ft Tripp Lite VGA over Cat5 Remote Unit Extender/Splitter - 4-Port 004 VGA Over Cat5 Extender/Splitter Local Unit - Video extender - 4 ports - external - up to 500 ft Advertised Price: $135.99 Category 5 RJ-45 Male to RJ-45 Male
The StarTech.com 4-Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Cat5 UTP cable using RJ-45 connectors and supports distances of up to 980 feet. At each remote monitor, a receiver (PCC Item #6500321, sold separately) is required to convert the signal from the UTP cable back into VGA video for the monitor. Typical applications are: airports, bus depots, factories, or any large
CAT5 TO VGA EXTENDER/SPLITTER 430FT 2X VGA SEND /RECEIV /PWR /CABLE
The Converge A/V 4 Port VGA over Cat5 video extender/splitter allows up to 5 monitors to be connected to a single VGA source.
The StarTech.com 4 Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable using RJ-45 connectors and supports distances of up to 980ft. Typical applications are: airports, bus depots, factories, or any large buildings where video needs to be delivered at long distances.
The StarTech.com 4 Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable using RJ-45 connectors and supports distances of up to 980ft. Typical applications are: airports, bus depots, factories, or any large buildings where video needs to be delivered at long distances.