• About these results
  • 57 products from 29 stores for

    arm header board

  • prices

    range
  • personalization

  • Colors

    Filter by color:
    Adjust your color:
  • Stores

    • Stores
  • Marketplaces

  • Brands

    • Brands
  • departments

    • Departments
  • payment types

    • Payment Types
  • certifications

    • Certifications
  • Due 2012 R3 Board SAM3X8E 32-bit ARM Version Arduino Control Board Module

    Description: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Note: Unlike other Arduino boards,

    $34.99
    • Free shipping

    Highlights:

  • Header Board STR711 ARM

    Header Board STR711 ARM Header Board STR711 ARM Cana Kit SKU: SX00607 Header Board STR711 ARM

    Highlights:

  • Header Board ADuC7020 ARM

    Header Board ADuC7020 ARM Header Board ADuC7020 ARM Cana Kit SKU: SX00471 Header Board ADuC7020 ARM

    Highlights:

  • Single SPDT Relay Board, Opto-Isolated for Arduino, ARM

    Single SPDT Relay Board, Opto-Isolated for Arduino, ARM Item Number: 31356 MP Detailed Description Single relay board designed to be driven by a Arduino, PIC, AVR or other micro controllers. Freeware available through www.arduino.cc.en & others on-line LED indicatorsfor power & input. Power: 5VDC @ 20mA Select either CPU Power or external. Input: .1in. header with Vcc, Gnd, and input. Contacts: SPDT 10A @ 28VDC ,30VDC ,125VAC ,250VAC Output : Terminal strips L : 1 -11 /16 " W : 1 " H : 3 /4 " WT :

    Highlights:

  • MCU123 NXP LPC1768 ARM Cortex-M3 Nano Prototyping Board

    MCU123 NXP LPC1768 ARM Cortex-M3 Nano Prototyping Board [LPC1768 _NANO _MCU123 _H1 ] $35 .00 Description MCU123 LPC1768 Nano protoyping board is designed to help user quickly to breadboard protoyping. All I/O pins are connected to a standard 0.1" spacing header that can be directly plug onto breadboard. Note: for external wall adaptor, the voltage should be between 5-14V. For the connector, inner positve and outside negative. It needs a JTAG programmer to program it ( ) ucOSII example is included.

    Highlights:

  • Bacon Guy Dashboard Bobbing Bobble Header [DISCONTINUED] Default Title

    It's the Dashboard Bacon Dashboard Nodding Doll. The shakin' piece of bacon measures 5"x3.5" (12.7cm x 8.89 cm) and is made of durable plastic. He sways around as your car moves as he's connected to a bouncy spring. The Bacon Bobbing Doll comes with an adhesive sticker to attach to your desk, dashboard, etc. PLUS, you can pose his arms and hands! In the well detailed plastic, you'll feel grooves along the bacon!

    Highlights:

  • Philips LPC2138 (ARM) Prototype Board, Dual RS232

    Philips LPC2138 (ARM) Prototype Board, Dual RS232 US $69 .93 LPC -P2138 This prototype board allows you to build your own projects around a NXP/Philips LPC2138 ARM7TDMI-S microcontroller . LPC2138 Prototype Board Features LPC2138 16/32-bit ARM7TDMI-S microcontroller with 512 kBytes Flash, 32 kBytes RAM, RTC, 8x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation Standard JTAG connector with ARM 2x10 pin layout for programming

    Highlights:

  • ANALOG DEVICES EVAL-ADUC7061MKZ ARM7, ADUC7061, KEIL, IAR, MINI KIT

    Price for: Each 1 . Core Architecture: ARM. Core Architecture: ARM. Core Sub-Architecture: ARM7TDMI. Core Sub-Architecture: ARM7TDMI. Features: 2-layer PCB, Single 9 V supply, UART header, JTAG, 32. 768 kHz crystal, ADR280 ext ref, full I/O access, prototype area. Kit Contents: Board, JTAG prog POD, CD, 9 V supply, cables. Kit Contents: Board. No. of Bits: 32 bit. RoHS Compliant: Yes. SVHC: No SVHC (19-Dec-2012). Silicon Core Number: ADUC7061. Silicon Core Number: ADUC7061. Silicon Family Name: ADuC706x.

    Highlights:

  • LPC11U14FBD48/201 ARM Cortex-M0 Header Board, 12 MHz Clock, SWD

    LPC-H11U14 For in-circuit programming /debugging of the LPC11U14 microcontroller, here is a couple of possibilities : LPC -H11U14 is a CPU header board with an NXP LPC11U14FBD48/201 ARM Cortex-M0 microcontroller for embedded applications. This 32-bit microcontroller supports various interfaces such as one Fast-mode Plus I2C-bus interface, one Full Speed USB 2.0 Device interface, one RS-485/EIA-485 USART with support for synchronous mode and smart card interface, two SSP interfaces, four general-purpose

    Highlights:

  • Analog Devices ADuC7020 (ARM) Header Board, 40-pin DIP

    This board allows you to add the functions of an Analog Devices ADuC7020 microcontroller to your project. The DIP40 header package makes for easy integration into your design. You can also purchase the optional which is designed to hold this header board. ADuC-M7020 Motherboard ADuC7020 Microcontroller Features ARM7TDMI Core, 16/32-bit RISC architecture 5 -Channel , 12-bit, 1Msps ADC Differential and single-ended modes 0 to Vref Analog Input Range 4-Output, 12-bit Voltage Output DACs On-Chip 20ppm/°C

    Highlights:

  • ARM Cortex Board Key Features

    LM3S9B96 (ARM Cortex M3) Header Board, Ethernet, USB OTG Aurora9B96 The Aurora 9B96 Controller Board is based on the Texas Instruments Stellaris® LM3S9B96 (ARM Cortex M3 core) microcontroller. It has up to 65 GPIO pins including 16 analog inputs and supports several serial interfaces such as SPI, UART, USB, CAN and I2C. The Aurora 9B96 is equipped with microUSB and Ethernet interfaces along with all I/ O pins broken out to male header pins for easy access. It’s a perfect vehicle for prototyping and

    Highlights:

  • STM32L152VBT6 Header Board Features

    STM32-H152 for a full list of modules that can plug into the UEXT port. STM32-H152 is a header board with an STM32L152VBT6 ARM Cortex-M3 microcontroller from STMicroelectronics. This microcontroller supports various communication interfaces such as USB, three USARTs, two SPIs, two I2C. The board has mini-USB, JTAG and UEXT connectors, two buttons (WKUP and RESET), two status LEDs, and extension connectors for most of the microcontroller's pins. The board can be powered via USB (5V), JTAG (5V), CON2 pin 7

    Highlights:

  • TEXAS INSTRUMENTS - EK-LM4F120XL - EVAL BOARD, STELLARIS LM4F120 LAUNCHPAD

    The Stellaris LM4F120 LaunchPad Evaluation Kit is a low-cost evaluation platform for ARM® CortexTM-M4F-based microcontrollers from Texas Instruments. The design of the Stellaris LaunchPad highlights the LM4F120H5QR microcontroller with a USB 2.0 device interface and hibernation module. The EK-LM4F120XL also features programmable user buttons and an RGB LED for custom applications. The stackable headers of the Stellaris LM4F120 LaunchPad BoosterPack XL Interface make it easy and simple to expand the

    Highlights:

  • LPC2138 Header Board Features

    Philips LPC2138 (ARM) Header Board, RS232 US $65 .73 LPC -H2138 This header board allows you to add the functions of an NXP/Philips LPC2138 ARM7TDMI-S microcontroller to your project. The two rows of 2x16 extension pins are separated by 1.9 inches (48.26 mm). LPC2138 Header Board Features LPC2138 16/32-bit ARM7TDMI-S microcontroller with 512 kBytes Flash, 32 kBytes RAM, RTC, 8x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation Standard

    Highlights:

  • LPC2214 Header Board Features

    Philips LPC2214 (ARM) Header Board, USB US $93 .73 LPC -H2214 LPC2214 Header Board Features MCU: 16/32-bit LPC2214 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, External Memory Bus, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation 1MB (256K x 32 bit) 12 ns 71V416 SRAM 1MB (512K x 16 bit) 55 ns MX26LV800BTC FLASH Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM -JTAG Powered

    Highlights:

  • 14-pin to 20-pin ARM JTAG Header Adapter

    JTAG header Adapter Application : 14 -pin to 20-pin ARM JTAG Header Adapter 14-pin to 20-pin ARM JTAG Header Adapter Adapts 14-pin JTAG emulator header to connect with 20-pin ARM JTAG Target Header. No Target board modification required No power requirements Compatible with Code Composer Studio™ 14-pin to 20-pin ARM JTAG adapter

    Highlights:

  • EFM32G880F128 Header Board Features

    EM-32G880F128-H for a full list of modules that can plug into the UEXT port. The EFM32G880F128 header board provides an easy way to develop and prototype with the EFM32G880F128 energy-friendly microcontroller produced by Energy Micro AS. With a combination of the powerful 32-bit ARM Cortex-M3, innovative low-energy techniques, short wake-up time from energy-saving modes, and a wide selection of peripherals, the EFM32G880F128 microcontroller is well suited for any battery-operated application as well as

    Highlights:

  • TI AM3517 Sitara ARM Cortex-A8 CPU Board, DIMM-200

    TI AM3517 Sitara ARM Cortex-A8 CPU Board, DIMM -200 SEED -DIM3517 CPU The SEED-DIM3517 CPU is a DIMM card with a Texas Instruments AM3517 Sitara ARM Cortex-A8 microprocessor. It can be connected to a system via a standard DIMM-200 with locking mechanism, and has screw holes for secure mounting. DIM3517 CPU Board Features Processor: AM3517 NAND Flash: 512 MBytes DDR2: 64M × 16-bit × 2 LAN port PHY On-board RTC DIMM connector interface 14-pin JTAG header AM3517 Sitara ARM Cortex-A8 CPU AM3517 is a

    Highlights:

  • STM32F107 Header Board Resources

    ST STM32F107VCT6 (ARM Cortex-M3) Header Board, USB STM32-H107 The ARM Cortex-M3 processor has been developed to provide a low-cost platform that meets the needs of MCU implementation with a reduced pin count and low power consumption, while delivering outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code efficiency, delivering the high performance expected from an ARM core in the memory size usually associated

    Highlights:

  • SAM9G45 low cost board, pico-ITX form factor

    Features pico-ITX compatible SBC (80x100mm) - ARM9, 400Mhz, ARM926EJ-S, 32/32K - 256MB DDR2 - 4 USB 2.0 ports 480Mbps, shared - 1 miniPCI-e with USB only support - 10/100 Mbps Ethernet - SD card reader - SIM card slot - Bootable microSD - 5V power via microUSB - 6-40V support via DC barrel connector - High endurance ceramic and SP capacitor design - Expansion header for SPI, I2C, RS232 - Native support 480 x 272 LCD (higher resolution possible) - WIFI support via miniPCI-e with USB - Buzzer - Ideal for

    ₨232.00

    Highlights:

    Ddr2, Pci
  • Arduino DUE board

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Warning: Unlike other Arduino boards, the

    Highlights:

  • ATSAM3S4BA Header Board Features

    Atmel ATSAM3S4BA (ARM Cortex-M3) Header Board, USB, JTAG SAM3-H256 The SAM3-H256 is a header board with an Atmel ATSAM3S4BA-AU microcontroller. The board has JTAG and USB connectors, extension headers for all the microcontroller's ports, Reset button, power and status LEDs. Atmel's ATSAM3S4BA is a member of a series of Flash microcontrollers based on the high-performance 32-bit ARM Cortex-M3 RISC processor. It operates at a maximum speed of and features Flash and SRAM, Full-Speed USB Device port with

    Highlights:

  • LPC2124 Header Board Features

    Philips LPC2124 (ARM) Header Board, RS232 US $61 .53 LPC -H2124 LPC2124 Header Board Features MCU: 16/32-bit LPC2124 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation Standard JTAG connector with ARM 2x10 layout for programming and debugging with ARM -JTAG 14 .7456 MHz crystal (4x PLL = 58.9824 MHz CPU clock) RESET button RESET circuit can be controlled externally by

    Highlights:

  • LPC1768 (Cortex-M3) Header Board, USB & JTAG Connectors

    LPC1768 (Cortex-M3) Header Board, USB & JTAG Connectors US $38 .33 BB -LPC1768 -H LPC1768 Header Board with mini-USB and 2x10 JTAG Connectors The BlueBoard-LPC1768-H is is a header board that makes the LPC1768 (ARM Cortex-M3) microcontroller pins available via pin headers. It also features an on-board power connector, mini-USB and JTAG connectors. The board can also be powered via USB. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface,

    Highlights:

  • LPC4330 Header Board, 2x USB, Ethernet, Audio in/out, microSD

    The board ships with one USB Device cable and one USB Host Adapter cable. Development Tools This board is not tied to any particular development environment. You can use whatever tools you want that are compatible with the LPC4330 microcontroller. Possible software tools include (32K code limitation on free version) or (free for code up to 128K ) . LPC4330 -Xplorer is a breakout board for the NXP LPC4330 ARM Cortex-M4 microcontroller. The LPC4330 is an ARM Cortex-M4 based digital signal controller with an

    Highlights:

  • STM32F103ZE (ARM-Cortex M3) Board, 2xRS232, USB, CAN, TFT LCD

    STM32F103ZE (ARM-Cortex M3) Board, 2xRS232, USB, CAN, TFT LCD US $140 .00 SZE1 The ST Microelectronics STM32F103ZEARM Cortex-M3 core-based processor operates at 72 MHz clock frequency. The board features USB, CAN, SD Card interface, TFT-LCD, RS232 serial interface and four 26-pin general I/O access headers. Plenty of software examples, which can be used with the Keil MDK environment, are included on CD-ROM. 512KB Flash memory, 64KB SRAM uCOS-II v2.86 ported Source code of example program The connectors

    Highlights:

  • NXP LPC2138 Development Board, JTAG

    EM-JB-LPC2138 The EM-JB-LPC2138 "Janta" board is a basic hardware platform with a power supply connector, JTAG port, 6-pin programming port, DBG jumper, BSL jumper, and male headers for the microcontroller's I/O pins. As well as via the standard 20-pin ARM JTAG port, the NXP LPC2138 microcontroller on this board can be programmed through a six-pin programming header designed especially for the low-cost USB programmer . EM -P -NXP View user manual and schematics

    Highlights:

  • LM3S5791 Board Downloads

    LM3S5791 (ARM Cortex M3) Header Board, USB OTG US $79 .00 Aurora5791 The Aurora5791 Controller Board is based on the Texas Instruments Stellaris® LM3S5791 (ARM Cortex M3 core) microcontroller.It has up to 70 GPIO pins including 16 analog inputs and supports several serial interfaces such as SPI, UART, USB, CAN and I2C. ARM Cortex Board Key Features 80MHz ARM Cortex-M3 Controller with 128KB Flash, 64KB SRAM 2x10-pin JTAG connector for in-circuit debugging /programming microUSB Connector with

    Highlights:

  • Programming Socket Board for NXP LPC CPU Header Boards

    The EasyARM Experimental Board allows you to program ARM microcontrollers that are mounted on header boards, e.g. a or any of these LPC2148/2214 Header Board blank LPC header boards A 2×5-pin header on the board is used to connect an in-circuit programmer. The programming pins are on the top column (pin 1 is MCU-VCC 3.3V).

    Highlights:

  • mikroBoard ARM-114, LPC2214 CPU Module w/ USB bootloader

    development system. For connection with the system, the mikroBoard has two 2×40 female headers. Installed on the MCU is a bootloader application. To program the MCU with a PC, just plug a mini-USB cable into the USB port. To use mikroBoard as standalone device, it is necessary to place jumper J2 (STANDALONE). In standalone mode, mikroBoard can get power from a PC via USB or through the 2×40 female header. When power is supplied to the 2×40 female header, it must be a regulated 5V supply. On-board regulators

    Highlights:

  • Share:
  • About these links