- Refine >
- About these results
StarTech.com 6 in 4 pin Molex to right angle SATA power cable adapter. Features one 4 Pin Molex (LP4) male connector and one female right angle SATA power connector. Powers a serial ATA hard drive from a conventional LP4 connection
StarTech SATAPOWADPL 4-Pin Molex to Left Angle SATA Power Cable Adapter, 6": 1 x Molex (LP4) power connector 1 x Left-angle (90-degree) SATA power connector Cable Length: 6"
The new Dual Serial ATA Power Splitter Cable from Cables To Go will enable you to connect your high speed Serial ATA drives to your power chain with this 4 Pin Molex to Dual 15 Pin Serial ATA power...
Power two SATA drives from a single LP4 power supply connector. The PYO2LP4LSATA LP4 Molex to Dual Latching SATA power splitter cable features two Serial ATA female power connectors and one LP4 male connector - a reliable solution that enables you to power two SATA drives using a single LP4 connection to the computer power supply. This durable LP4 to SATA Y cable adapter is 12 inches in length, giving you enough cable slack to position drives as needed within the computer case, while saving the cost and
Convert two 4-pin power connectors to one 6-pin auxiliary power connector.
Startech.com 2 Molex LP4 power extension cable is constructed of good quality materials and provides optimum performance. Cable features reliability and helps to position hard drive, DVD-ROM drive and add-in card as required. Conductor size: 8 AWG Length: ' Connector: x 4-pin LP4 molex large drive power male first end, x 4-pin LP4 molex large drive power female second end Device supported: Hard drive Connector style: Straight Dimensions: 3.3"(H) x 9.6"(W) Constructed of only top quality materials Designed
p The FAN4EXT12 12 inch 4 Pin Fan Power Extension Cable lets you extend the power connection between a computer power supply and a 4 pin fan by up to 1ft, enabling you to conveniently install the fan where needed in the computer case, without having to stretch or strain the connection. p p Compatibility p CPU Fans p p
Power a Serial ATA hard drive from a conventional LP4 power supply connection. This 6in 4 Pin (LP4) Molex to SATA power adapter cable features one 4 Pin Molex (LP4) male connector and one female SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive. This Molex to SATA adapter is backed by StarTech.com''s Lifetime Warranty.
Connect two 4-pin (PWM) Fans to a Single Motherboard Fan Power Connector. The FAN4SPLIT12 Fan Power Splitter Cable enables you to connect two 4-pin (PWM) fans to a single motherboard power connector, which allows you to optimize your computer cooling capability. Providing a flexible way to position computer case fans as needed, this 4-pin Fan Power Splitter cable offers a connection length of 1ft, eliminating the need to strain the connection between the computer power connector and the fans. This high
C2G power adapter - 5.9 in C2G power adapter - 5.9 in CDW Part: 1999278 Power adapter 15 pin SATA power (M) 4 pin internal power (F) 5.9 in multicolor Power adapter 15 pin SATA power (M) 4 pin internal power (F) 5.9 in multicolor Use with IDE drives and other LP4 devices to connect to a SATA power connector. This cable connects a SATA hard drive with the standard 15 pins out, to a standard Molex (LP4) 4-pin connector that connects to a power supply. Power 15 pin Serial ATA power 4 pin internal power C2G
The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable allows you to position your devices as needed within the system case. Technical Information: Connector on Second End:1 x 4-pin Molex Green Compliance Certificate /Authority :RoHS Weight (Approximate):0.60 oz Connector on First End:1 x 15-pin SATA Green Compliant:Yes
This adapter cable connects a standard 4-pin Molex (LP4) power connector to the special onboard 4-pin P4 power connector.
"Aleratec 6"" 4 Pin Molex to SATA Power Cable Adapter, 6-Pack Combo"
BitFenix Alchemy Multisleeve 4-Pin Molex to Triple 4-Pin Adapter Cable - 60cm - White Sleeve / Black Connector
" Short Description: 12"" Molex 4-Pin to 2x 15-Pin Right Angle SATA Power Cable. Cable total length is 12"". Two SATA power connectors are 8"" apart. Provide power to two SATA devices from one Molex connector."
4 pin Molex connecter to 2 Serial ATA Power Splitter Cable Quantity: 2 Now you can use your high speed Serial ATA (SATA) drives with the original 4 pin Molex Connect one 4 pin Molex power connector to 2 15 pin Molex power connecters Accessory ONLY. Product names are trademark of listed manufacturer or other owners, and are not trademarks of eForCity Corp. The manufacturer does not necessarily endorse use of these products.
Power Cords, Connectors, and Accessories EverCool MOLEX-Y 4 pin to 3 pin Female Power Cable, P/N: CB-YA-4-3. for non-defective returns. No credit or refund after 7 days. Customer is responsible for returning manufacturer defective products including DOA unless is paid before shipping. (Jancy041013) : Directron.com has a $10 minimum-order requirement. You may EverCool CB -YA -4 -3 *Free Economy Shipping* EverCool MOLEX-Y 4 pin to 3 pin Female Power Cable, P/N: CB-YA-4-3
Connects a 15-pin SATA drive power connector to an LP4 Molex power supply View larger Look for StarTech.com Branded Packaging - ensure you are getting a genuine StarTech.com product View larger Power A Serial ATA Hard Drive From A Conventional LP4 Power Supply Connection This 6-inch, 4-pin (LP4) Molex to SATA power adapter cable features one 4-pin Molex (LP4) male connector and one female SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection. This eliminates
6in 4 Pin Molex to Right Angle SATA Power Cable Adapter
The Serial ATA standard provides for the adoption of a new 15-pin drive power connector, replacing the ubiquitous 4-pin Molex connector. However, existing system cases and power supplies may have an insufficient number of SATA power connectors, while still retaining the older Molex connectors. This 24 adapter cable plugs into a 4-pin Molex power plug and provides four 15-pin SATA power connectors. Each SATA power connector is spaced about 6 inches apart, allowing four drives to be easily daisy chained to
BitFenix Alchemy Multisleeve 4-Pin Molex to Triple 4-Pin Adapter Cable - 60cm - Orange Sleeve / Black Connector
Features one 4-Pin Molex (LP4) male connector & one (female) right angle SATA power connector allowing to power a Serial ATA hard drive from a conventional LP4 connection.
Kingwin SAC-05 15 Pin SATA Power Connector To Dual Molex 4-Pin Splitter Cable - SATA/Molex - 8" - 1 x Male SATA/Power - 2 x Molex Female Power - Red, Yellow, Black
♦Features: ♦4 pin socket to 4 pin plug Extension Cable. 12 inches ♦A must for any Pentium system motherboard upgrade ♦Easily upgrade your ATX power supply to a P4 ♦Build a high performance P4 system without having to buy a new power supply ♦This adapter cable allows you to easily convert from a standard 4 pin Molex power connector to a 4 pin P4 motherboard power connector ♦Connector can use AMP MOLEX JST KET and so on ♦Connector Type: 4Pin Molex Male Power
This Serial ATA(SATA) power cable attaches to a 4-pin Molex connector from your power supply and provides a power connector for a SATA hard drive- Satisfaction ensured- Manufactured to the highest quality available- Durability and functionality exceeds any other brands- With true enhanced performance- SKU: EFLTE1444
Connect Molex to SATA with ease with a C2G 6" 4-Pin Molex to SATA Power cable! This cable easily converts power from 4-Pin Molex ports to SATA power connections! C2G SATA Power Adapter Cable Connector A 4-Pin Molex M (LP4) Connector B 15-Pin SATA F Length 6 inches Adapt SATA power! This cable easily converts 4-Pin Molex power connections to SATA power connections, making it easy to install any SATA component! Specifications Color Multi-Color Length 6in Weight 0.026lbs Jacket Rating Standard
SATA Adapter & Splitter Cable, converts a molex 4-pin from power supply to two 15-pin SATA power connectors for SATA hard drive, Model: CB-SATA2R. for non-defective returns. No credit or refund after 7 days. Customer is responsible for returning manufacturer defective products including DOA unless is paid before shipping. (Alice-031208) SATA Adapter and Splitter Cable, Converts a Molex 4-pin to Two 15-pin SATA for SATA HDDs, Model: CB -SATA2R CBL -CB -SATA2R Regular price:$3.99
The Cables to Go 10155 is a 6 inch power y-splitter that will allow you to add more SATA power connections to your system or power multiple SATA devices off one peripheral power connector. This power y-splitter connects 1 4-Pin Male Molex to 2 Female SATA Power. Cables to Go 10155 Cable Type Male Molex to Female SATA Power Power Y-Splitter Connector 1 1 4-Pin Molex (Male) Connector 2: 2 SATA Power (Female) Length 6 Inches
StarTech.com 4 Pin Molex to Left Angle SATA Power Cable Adapter - Power adapter - 15 pin SATA power (M) - 4 pin internal power (M) - 5.9 in
Features: Converts: Converts back and forth between 4-pin Molex Power Male Plug and 2 Female Molex Power Plugs. End 1: 4-pin Molex Power Male Plug End 2: 2 Female Molex Power Plugs. Length: 8 inches Specifications: Power Product Weight: 0.07