Increase tire/fender clearance, flare fenders and/or repair wheel arch collision damage with this pro grade forming tool. Bolts directly to hub flange. Elongated holes in adapter plate fit all popular 4 and 5 bolt hubs, and are held in place with the included dished washers and vehicles lug nuts. Forming arm adjusts from 14" to 22 3/4" Delrin ® ball bearing forming roller is tough enough to form the fender without damaging the paint. Limited one year warranty. Imported. Non-returnable. If defective we will
VW Eurovan pliers, wrenches & pick-up tools manufactured by Schley Tools for 1993-1994 VW Eurovan MV VW Eurovan.
Increase tire/fender clearance, flare fenders and/or repair wheel arch collision damage with this pro grade forming tool. Bolts directly to hub flange. Elongated holes in adapter plate fit all popular 4 and 5 bolt hubs, and are held in place with the included dished washers and vehicles lug nuts. Forming arm adjusts from 14" to 22 3/4" Delrin ® ball bearing forming roller is tough enough to form the fender without damaging the paint. Limited one year warranty. Imported. Non-returnable. If defective we will
VW Rabbit pliers, wrenches & pick-up tools manufactured by Schley Tools for 1981-1982 VW Rabbit Sport VW Rabbit.
Features and Benefits: Required tool for working with brakes on VW Passat, Tijuan, Audi A6, and Audi A8 from 2005 Electronically move calipers via OBDII port. Adjust tilt angle, and enter brake pad thickness Clear codes after doing brake jobs Without this tool, technicians cannot work on the brakes for these vehicles Compatible with CAN vehicles and updateable Enables service and repair functions to be carried out on EPB systems for MY 2005-08 VW Passat (3C Chassis) and MY2006-07 Audi A6 (4F Chassis) and A8
Schley 79100 VW Crankshaft Gear Pulling Tool Part Number: SCH79100 Description Schley 79100 VW Crankshaft Gear Pulling Tool. This tool removes the crankshaft timing gear, a gear that must be removed with an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the
Assenmacher Specialty Tools Vw/audi 7 Piece, 12-Point Socket Set AST6300 0246-ast-6300 $94.49 $75.59 Assenmacher Specialty Tools Vw/audi 7 Piece, 12-Point Socket Set AST6300 6300 XL-14 - for R and R of late model Eurovan axle shafts and ball joints 6300 XL-8 - for R and R of axle shaft bolts on VW Beetle, Jetta TDI and older VW/Audi models 6300 XL-10 - for R and R of axle shaft bolts on VW Passat and Golf (new body style) 6300 X-16 - for R and R of manual transmisson drain plug and Porsche Cayenne brake
» VW Group Camshaft Tool VW 1.9 SDI Camshaft Tool VW 1.9 SDI £36.92 Product Information F14443
Also known as: STGEPB30369600; Features and Benefits: Required tool for working with brakes on VW Passat, Tijuan, Audi A6, and Audi A8 from 2005 Electronically move calipers via OBDII port. Adjust tilt angle, and enter brake pad thickness Clear codes after doing brake jobs Without this tool, technicians cannot work on the brakes for these vehicles Compatible with CAN vehicles and updateable Enables service and repair functions to be carried out on EPB systems for MY 2005-08 VW Passat (3C Chassis) and
14mm Allen bit for Passats, A4 96-01: front and rear axle bolts (AWD) 17mm Allen bit for Passats since 1998, Audi A6 1999-2004, 02-05 A4: Front and rear axle bolts (AWD) 30mm 12 point socket for mid 99 and newer Golf, Jetta, Cabrio, and Beettle. Front axle nut. 32mm 12 point socket 3/4" drive for Touareg. Front and rear axle nuts.
VW Clutch Alignment Tool - SP81251 VW Clutch Alignment Tool - SP81251 Fox, Gulf, Jetta, Rabbit and Scirocco clutch alignment tool $11.50 SP81251-AST Schley Products SLY-81251 A must tool to align the clutch on Fox, Gulf, Jetta, Rabbit and Scirocco This clutch alignment tool has been designed to center the clutch disk with the pressure plate when it is installed. If this is not done accurately the gearbox mainshaft will not be able to locate the splines of the clutch disk hub, and it will be impossible to
Clutch Pilot Disk Tool - VW / Volkswagen Toolsource #77365 Manufacturers Part Number #3178 The AST# 3178 Clutch Pilot Tool is a disk used for centering the clutch disk during R and R. Applicable to all VW with 16 valve engines and VW Golf and Jetta with 2.0 liter, 8 valve engines. Steel Construction. Product Reviews Parse Time: 0.627s 0.627 s
Features (Deutsch):1. Diagnostic via CAN-und Spezial-Funktionen über K-Line. 2. Hierunter fallen alle elektronischen Steuergeräte in Fahrzeugen (Diagnose-Adressen von 0x01 bis 0x80). Dies kann der Benutzer zu untersuchen und Diagnose einige neue Einheiten für den Verbleib unantastbar Diagnosetools. Funktionen sind unter CAN-TP2.0. 3. Manuelle Definition der laufenden Sitzung nicht diagnostische wie verbleibenden Diagnoseinstrumente immer Standard -Diagnose -Tagung 0x89. Funktion finden Sie
: 14mm Allen bit for Passats, A4 96-01: front and rear axle bolts (AWD): 17mm Allen bit for Passats since 1998, Audi A6 1999-2004, 02-05 A4: Front and rear axle bolts (AWD): 30mm 12 point socket for mid 99 and newer Golf, Jetta, Cabrio, and Beettle. Front axle nut.: 32mm 12 point socket 3/4" drive for Touareg. Front and rear axle nuts.
Assenmacher 3391 VW / Audi Camshaft Alignment Tool Part Number: AST3391 Description Used to hold both camshafts at TDC position when replacing timing belt. Used in conjunction with AST3242. Applicable: Audi models with V-6 engine (5 valves per cylinder and 2.7 bi-turbo). Assenmacher 3391 VW / Audi Camshaft Alignment Tool.
Schley Products 63600 Audi & VW Fan Clutch Pulley Holding Tool • This unique tool is a 4 pin wrench design that holds the pulley of the viscous fan clutch. This allows the technician to hold the fan clutch with one hand and break the coupling nut loose with the other hand. Its long handle design gives the technician plenty of room to hold the wrench securely. Made from heat treated steel this wrench comes with a soft grip handle. Our #62100 (32 mm) wrench is a perfect match for this fan clutch service. This
Assenmacher Specialty Tools 6300 VW/Audi 7 Piece, 12-point Socket Set Assenmacher Specialty Tools SKU: W-AST6300 Your Price: $69.23 Assenmacher Specialty Tools 6300 VW/Audi 7 Piece, 12-point Socket Set 6300 XL-14 - for R and R of late model Eurovan axle shafts and ball joints 6300 XL-8 - for R and R of axle shaft bolts on VW Beetle, Jetta TDI and older VW/Audi models 6300 XL-10 - for R and R of axle shaft bolts on VW Passat and Golf (new body style) 6300 X-16 - for R and R of manual transmisson drain plug
> Assenmacher Specialty Tools VW/Audi Axle Nut Socket Set - Hex Bit and 12 point Sockets AST6500 Assenmacher Specialty Tools VW/Audi Axle Nut Socket Set - Hex Bit and 12 point Sockets AST6500 AST6500 Regular Price: $89.19 $67.78 Product Description • 14mm Allen bit for Passats, A4 96-01: front and rear axle bolts (AWD) • 17mm Allen bit for Passats since 1998, Audi A6 1999-2004, 02-05 A4: Front and rear axle bolts (AWD) • 30mm 12 point socket for mid 99 and newer Golf, Jetta, Cabrio, and Beettle. Front axle
Applications: Click Here to Verify Vehicle Option Specs Porsche 356, 48-55 356A, 56-59 356A Base, 56-57 356A Super, 56-57 356B, 60-63 356B Super, 60-62 356B Super 90, 60-62 356C, 64-65 356SC, 64-65 Volkswagen Beetle, 54-78 Beetle Base, 50-53 Beetle Deluxe, 50-53 Karmann Ghia, 56-74 Super Beetle, 71-79 Thing, 73-74 Transporter, 50-67
Assenmacher Specialty Tools VW/Audi Software Cartidge Kit 0246-ast5701-718e $756.88 $605.51 Assenmacher Specialty Tools VW/Audi Software Cartidge Kit VW/Audi software kit includes cartridge and connectors. Applications: Systems that use Rapid Data Transfer through 2003. Functions include fault code recall/reset, reset adaptation, coding of the control module, live data, service light reset, key coding and more. Note: This item ships via UPS Ground. Sorry, expedited shipping is not available on this item.