Replace worn or damaged Shock Spacers on your HPI Hellfire RTR - HPIC1050 and get it ready for fun again with the stock Shock Spacers Parts Set from HPI. FEATURES: Nylon construction, black in color YOU WILL RECEIVE: Four upper spring retainers Two lower spring retainers Two shock ends Two 1mm thick preload spacers Two 2mm thick preload spacers Two 3mm thick preload spacers Two 8mm thick preload spacers Two 10mm thick preload spacers REQUIREMENTS: Installation following the model manual kpm03/01/2006 ir/jxs
These are the Shock Pistons and Travel Limiters for the Traxxas Rally VXL. Red plastic shock pistons with 2 x.5mm holes. Back plastic travel limiters. Includes: Four shock pistons; Four travel limiters. Requires: Installation in shocks. Thickness: Piston (.06) Limiter (.16). Inside Diameter: Piston (.09) Limiter (.09). Outside Diameter: Piston (.30) Limiter (.19).
TopCad #23001P Aluminum Shock Set 105mm (2) For Axial Wraith Purple for Axial Wraith
Fox 3.0 Factory Series Bypass Shock Set Black/Zinc Extended 29.41 in. Collapsed 17.925 in. Stroke 11.485 in. QAB Shock
This is the Shock Parts Set for use on the HPI Racing 1/8 Savage Flux HP Brushless Truck RTR FEATURES: Nylon construction Black in color INCLUDES: One Shock Parts Set REQUIRES: Installation on the vehicle cnh 4/9/09 ir/jxs
Replica 14-1/2" shock set Iis 4-1/2" center to center from mount holes, and includes bushings with 1/2" holes, and chrome springs. Sold as a pair. ***Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over bumps or in turns.*** Fits:XL 1957-1978 K 1952-1956 Part Number: 540100ZM Corresponding OEM No: 54504 Country of Origin : Imported Powered by eBay Turbo
Team Integy MSR4 Shock Set w/Piggyback, Silver: T-Maxx 2.5
HPI Shock Parts Rod End Set - Savage HPI Shock Parts Rod End Set - Savage HPI Shock Parts Rod End Set - Savage No. 293270 These are replacement shock parts, rod end set from HPI for the Savage 21. Details HPI Shock Parts Rod End Set - Savage These are replacement shock parts, rod end set from HPI for the Savage 21.
This is the Shock Parts Set for the HPI Baja. FEATURES: Constructed of plastic, black in color Parts for two shocks INCLUDES: Two each top and bottom caps, two pistons, two rubber O-rings, two plastic spacers, four rubber pads, two rubber seals REQUIRES: Shock springs, shafts and oil jxs 7/13/06 ir/jxs
This is the Shock Parts Set for use with the HPI Firestorm 10T Stadium Truck FEATURES: Nylon Construction Black in Color INCLUDES: Four Nylon Spring Retainer Tops Four Nylon Spring Retainer Bottoms Four Nylon Ball Ends Twelve Nylon Spacers REQUIRES: Installation into Firestorm 10T JiM 3.22.07 ir/jxs
These are the Replacement Shock Parts set for / use with the Duratrax Vendetta ST / / FEATURES: Nylon Construction / / INCLUDES: Two Lower Spring Retainers / Two Shock Ends / Two Upper Spring Retainers / Two Shock Pistons / / REQUIRES: Installation / / JiM 5.23.07
Product Information : HPI100949 Shock Parts Set for Savage Flux, HPI-Racing, HPI100949 Product Details: Related Products: Shock Parts Set for Savage Flux
:: HPI A472 Shock Parts Set HPI A472 Shock Parts Set Details HPIC3472 A472 HPI A472 Shock Parts Set This is the Stock Replacement Shock Parts Set for the HPI Nitro Rush. These are the nylon components of the shocks . Features HPI A472 Shock Parts Set Black nylon construction. Two top shock ends Six open-ended rod ends Two linkage ball cups Two standard ball cups Four tall shock spring spacers Four top spring rings Four lower shock body caps Four spring retainers Cutting parts from parts trees. There
Hop-Up replacement Shock Caps (Big Bore) are designed to fit Traxxas Big Bore shocks (TRA2660 Long Big Bore and TRA2661 Extra Long)- This is a set of two replacement aluminum big bore shock caps from Traxxas- Part Compatibility:- Traxxas 4-Tec- Traxxas Bandit- Traxxas E-Maxx- Traxxas Nitro 4-Tec- Traxxas Nitro Rustler- Traxxas Nitro Stampede- Traxxas Rustler- Traxxas S-Maxx- Traxxas Slash- Traxxas Slash 4x4- Traxxas Stampede- SKU: RCHOB0588
Chrome 11" shock set comes with full covered springs and chrome body. Shock is 1" shorter than stock length shock. Shocks are measured from center of eyelet to center of eyelet. ***Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over bumps or in turns.*** Fits:FL 1973-1984 FX 1973-1984 Part Number: 540107ZM Country of Origin: Imported Powered by eBay Tu