-
Roush Performance Rear Upper Trailing Arm Bracket - Roush Number: 401882 401882
REAR UPPER TRAILING ARM BRACKETDesigned to work with competition armsAllows additional anti-squat in lower position for reduced wheel hopUses factory style threaded insert on front of bracket to aid assemblyMade in USAHeavy-duty construction to stand up to severe applications such as torque and heavy stress loads from drag racing
$164.99 -
Edelbrock Torque Arm 5282
Edelbrock 5282 5282 Torque Arm; w/GM Corporate 10-Bolt Rear Ends; Torque Arm Lips Facing Away From Driveshaft; Adjustable;
$264.95 -
BMR Camaro / Firebird Torque Arm Axle Mount Bracket (1993-2002)
Replacement axle mount bracket for Xtreme torque arm, Trak Pak torque arm, Adjustable torque arm, and Chrome-moly torque arm. TAB001- replacement bracket for Xtreme torque arm and Trak Pak torque arm TAB002-replacement bracket for adjustable and chrome-mloy torque arm. Product availiable in Black Hammertone or Red powdercoat. IMPORTANT NOTICE TO MOSER 12 BOLT USERS: This product is only warrantable on rear axles that utilize the factory style "through bolts" to connect the torque arm to the rear end. Moser
$69.94Afterthoughts Auto -
99-04 Ford Mustang Steeda Aluminum Lower Rear Control Arms - 16039
Steeda's Aluminum Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Don't be fooled by imitators! Steeda's Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and vibration while planting your tires to the pavement. NOTE: *Does not fit 1999-2003 Cobra Less NVH than arms
$274.99 -
Bushing (Front) Rear Torque Arm/Support Bar (Genuine Saab)-Saab 900 M79-87
Bushing (Front) Rear Torque Arm/Support Bar (Genuine Saab)-Saab 900 M79-87 [8908675] £14.90 Genuine Saab rear link/torque arm front bush To Fit: Classic 900 1979 to 1987 0.299 s
£14.90Edison Ltd -
5282 - Edelbrock Camaro/Firebird Torque Arms
5282 - Edelbrock Camaro/Firebird Torque Arms These torque arms feature strong tubular construction and a polyurethane front bushing to reduce wheel hop caused by excessive flex under hard acceleration and cornering. They fit vehicles with GM 10-bolt rear ends in which front locator of stock torque arm has lips facing away from driveshaft. Edelbrock #350-5282 Adjustable Torque Arm 1984-2002 Camaro/Firebird Only $103.99 Only $242.99 Only $103.99 Only $242.99
$264.99Jeg's High Performance -
Megan Racing Nissan 350Z Rear Camber Arms
Megan Racing Nissan 350Z Rear Camber Arms Megan Racing Nissan 350Z Rear Camber Arms #11361 MR-RCA-N3Z $187.20 $144.00 The 350Z is the next generation of the Fairlady, the Z33, and is Nissan s current dominating force in Motorsports. With it s Naturally Aspirated 3.5L Quad-Cam V6 (VQ35DE) that boasts torque from Low-Mid Range to Redline the 350Z is an extremely well-adapted force in competition. In it s stock configuration it is capable of so much but is still watered-down from it s full potential due to the
$144.00TurboWholesale.com -
Rear Mounting Bracket - Spohn Std. Duty & Transmission Mounted Torque Arms
Rear Mounting Bracket - Spohn Std. Duty & Transmission Mounted Torque Arms SKU # 031 Price: $50.00 Bright Red Gloss Black Replacement rear mounting bracket for Spohn Standard Duty crossmember mounted torque arms and Spohn transmission mounted torque arm.
$50.00Spohn Performance Inc. -
1979-04 Mustang Steeda Steel Lower Rear Control Arms
1979-04 Mustang Steeda Steel Lower Rear Control Arms Item #: 555-4420 NOTE: *Does not fit 1999-2004 Cobra Steeda's Aluminum Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Don't be fooled by imitators! Steeda's Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and
$199.95Stage3 Motor Sports -
Steeda Aluminum Upper Rear Control Arms (79-04)
This item is for use on all 96 and later Mustang models. (Except 99-04 Cobra) The perfect compliment to Steeda aluminum lowers. Get rid of the unwanted side to side "sloshing" and rear-end "wiggle". High strength, heat treated aluminum alloy resists flexing at 1/3 the weight of other control arms. Multiple-density bushings help eliminate the noise, vibration, and suspension bind problems found with some control arms on the market. The results: racing traction and control, with the smoothness of a street
$229.99American Muscle -
Mustang - 79-98 Lower Control Arm, Rear Non-Adjustable With Spring Perch & Sway Bar Mount by Maximum Motorsports
» Item# MM-MMRLCA1 Mustang - 79-98 Lower Control Arm, Rear Non-Adjustable With Spring Perch & Sway Bar Mount by Maximum Motorsports # MM-MMRLCA1 Description Heavy Duty Rear Lower Control Arms, with Spring Perch and Swaybar Mount, 1979-98 The MM Heavy-Duty Rear Lower Control Arms utilize specially designed 3-piece urethane bushings at the chassis end. These bushings have a hard center section to prevent fore and aft deflection, and softer outer sections to allow the angular motion necessary to prevent bind.
$249.99Latemodel Restoration Supply -
1982-1992 F-Body Adjustable Torque Arm TH400 Transmission Retrofit with Front & Rear Driveshaft Loops
> 1982-1992 F-Body Adjustable Torque Arm TH400 Transmission Retrofit with Front & Rear Driveshaft Loops 1982-1992 F-Body Adjustable Torque Arm TH400 Transmission Retrofit with Front & Rear Driveshaft Loops SP-304FRL colors: RED
$395.00 -
Rubicon Express 2.5" Rear Radius Arm Long Arm Suspension System for 03-06 Jeep® Wrangler TJ
» Rubicon Express 2.5" Rear Radius Arm Long Arm Suspension System for 03-06 Jeep® Wrangler TJ The TJ Extreme-Duty™ Long Arm suspension systems are the best performing and most technologically advanced systems on the market; and it only gets better with the NEW Extreme-Duty™ Radius Long Arm for the rear of your TJ. There is not a better long arm suspension system available for your TJ. The Rubicon Express Rear Radius Arm systems are available for ‘97-’06 Jeep Wrangler TJ’s and can be ordered as a complete
$2,790acmejeepparts -
MM 99-04 HD Rear Lower Control Arm (w/ Spring Perch, no Swaybar)
MM 99-04 HD Rear Lower Control Arm (w/ Spring Perch, no Swaybar) Product 3/9 MM 99-04 HD Rear Lower Control Arm (w/ Spring Perch, no Swaybar) MMRLCA-5.1 $259.95 Maximum Motorsports Heavy Duty Rear Lower Control Arms, with Spring Perch, without Swaybar Mount, for 1999-04 Mustangs The MM Heavy-Duty Rear Lower Control Arms utilize specially designed 3-piece urethane bushings at the chassis end. These bushings have a hard center section to prevent fore and aft deflection, and softer outer sections to allow the
$259.95LethalPerformance -
Bushing (Rear) Rear Torque Arm/Support Bar (Genuine Saab)-Saab 900 M88-93
Bushing (Rear) Rear Torque Arm/Support Bar (Genuine Saab)-Saab 900 M88-93 [8956468] £14.21 Genuine Saab Classic 900 1988 to 1993 including Convertible Rear link/torque arm rear bush 0.633 s
£14.21Edison Ltd -
1979-04 Mustang Steeda Steel Lower Rear Control Arms
1979-04 Mustang Steeda Steel Lower Rear Control Arms Item #: 555-4420 NOTE: *Does not fit 1999-2004 Cobra Steeda's Aluminum Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with swaybar mounts located to clear differential stud girdles and T-Rex fuel pumps. Don't be fooled by imitators! Steeda's Aluminum lower rear control arms are the only ones that use our exclusive four part variable rate bushings to eliminate suspension bind and
$199.95headers4u -
Steeda Heavy Duty Upper Rear Control Arms
Steeda Heavy Duty Upper Rear Control Arms Steeda's Steel upper control arms are made from tubular DOM material and tig welded for ultimate strength. A great starting place for the street enthusiast who wants more traction, better handling and more stable cornering. This arm offers an incredible bang for the buck and will eliminate the side to side sloppiness in the rear of the car. Designed for 79-04 Mustang, the arms come powdercoated black, complete with urethane front (3 piece design) bushings and
$149.95livernoismotorsports -
Torque Arm Rear Mounting Hardware Kit, 82-2002 F-Body
Torque Arm Rear Mounting Hardware Kit, 82-2002 F-Body Torque Arm Rear Mounting Hardware Kit, 82-2002 F-Body Don't use your old rusty mounting bolts when installing an aftermarket torque arm (if you managed to get the nuts off without breaking the bolts!). This rear torque arm mounting bolts are longer than OEM to accomodate for the thicker mounting plates of the rear mounting bracket on aftermarket torque arms, this allows for full thread engagement through the nut. These bolts are Grade 8 for maximum
$19.95Hawks Third Gen Parts -
Megan Racing Rear Camber Arms: Nissan 350Z 2003-2006
Megan Racing Rear Camber Arms: Nissan 350Z 2003-2006 The 350Z is the next generation of the Fair lady, the Z33, and is Nissan s current dominating force in motor sports. With it s Naturally Aspirated 3.5L Quad-Cam V6 (VQ35DE) that boasts torque from Low-Mid Range to Red line the 350Z is an extremely well-adapted force in competition. In it s stock configuration it is capable of so much but is still watered-down from it s full potential due to the conservative restraints of Consumer marketing and comfort.
$147.63Built By Notorious -
1988-1990 Volvo 760 V-6 Rear Torque Arm Bushing-Wagons Only
2 Per Vehicle
$11.97
sponsored links
-
Jegs - Torque Arms
Reduce Wheel Hop For A Stronger Performance. Fast 1-2 Day Shipping.
JEGS.com -
Torque Arm
Largest Selection of Ergonomic Torque Reaction Arms
www.FlexibleAssembly.com -
Lowest Price on Edelbrock
Edelbrock Torque Arm Will Beat Any Price. Free Shipping.
www.StreetSideAuto.com/Edelbrock -
Torque Arm
Buy torque arm now! Fuel your passion on eBay Motors.
www.eBayMotors.com
