polished intake manifold

Venom Polished Billet Aluminum Intake Manifold

BILLET ALUMINUM INTAKE MANIFOLD CNC machined 6061 T6 billet aluminum head flange Machined intake runner surface reduces turbulence to increase speed & volumetric efficiency of intake manifold (70% over stock intake) Accepts throttle body up to 66mm. Can be used on naturally aspirated or forced-induction (turbo, etc.) car. 17"W x 10.25"H x 6"D.

Edelbrock 21011 Performer Polished Aluminum Intake Manifold

The Edelbrock Performer Intake Manifold has a patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range, from idle to 5,500 RPM. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR (Exhaust Gas Recirculation) styles. Fel-pro permatorque and blue intake gaskets are not used in this manifold because of their very hard, non-pliable construction. They do not compress well when used with an aluminum

Performer Vortec Intake Manifold Polished Finish Street Rod Dual Plane Chevy Small Block 262-400 For 4 bbl Carbs Non-EGR Idle-5500rpm Street/Hi Performance Use Only 158191

Performer Vortec - Intake Manifold - Polished Finish - Street Rod - Dual Plane - Chevy Small Block 262-400 - For 4 bbl Carbs - Non-EGR - Idle-5500rpm - Street/Hi Performance Use Only

02-06 Acura RSX Injen Polished Air Intake Manifold Cover - SC1475P

Air Intake Manifold Cover, Polished Injen Technology offers a variety of cosmetic and high performance air intake accessories. Each accessory item is manufactured with the highest quality materials available. [INJSC1475P] Injen Polished Air Intake Manifold Cover - SC1475P Professional installation recommended. Air Intake Manifold Cover, Polished Fits: • 2002-2006 Acura RSX Type S

PP54032A 01 INTAKE MANIFOLD HURRICANE POLISHED 65/95 351W

Chevy SB Street Performance Intake Manifold (polished)

Chevy SB Street Performance Intake Manifold (polished) Professional Products 52000 Intake Manifolds PRP52000 Fitment Guide Chevrolet small block 350 Fits Chevrolet engines 1957-1995 without vortec heads non egr Camaro Chevelle Silverado Nova Trans Am and more not listed. 1957 - 1995 STREET MANIFOLD 302-350 CYCLONE, SATIN, WITHOUT VORTEC HEADS, NON EGR Professional Products 52000 Description

Venom Polished Billet Aluminum Intake Manifold

BILLET ALUMINUM INTAKE MANIFOLD CNC machined 6061 T6 billet aluminum head flange Machined intake runner surface reduces turbulence to increase speed & volumetric efficiency of intake manifold (70% over stock intake) Accepts throttle body up to 66mm. Can be used on naturally aspirated or forced-induction (turbo, etc.) car. 17"W x 10.25"H x 6"D.

Edelbrock (47541) Intake Manifold - Performer X - Polished Finish

> Edelbrock (47541) Intake Manifold - Performer X - Polished Finish Edelbrock (47541) Intake Manifold - Performer X - Polished Finish Item# Edelbrock-47541 Was: $515.00 Now: $490.00 Product Descriptions: Upgrade at any time to bolt-on 4 auxiliary injectors by simply drilling out the pre-machined injector bosses and adding on the Secondary Fuel Rail Upgrade Kit #4752 (injectors sold separately). The Performer X intake manifolds for Honda and Acura's are engineered for street/strip applications where peak

Professional Products Polished Typhoon Intake Manifold (86-95 5.0L)

High Performance. The Professional Products Typhoon Intake Manifold is great for high performance street use, bracket racing, nitrous, or even supercharged applications. Use Professional Products 70mm Throttle Body with their Typhoon Intake Manifold for optimum performance of your 5.0 Mustang. Polished Finish. Completed in a highly polished show finish this intake looks great under the hood of your stallion letting everyone know you mean business on and off the street. Application. The Professional Products

Injen Intake Manifold Cover 02-06 Acura RSX Type-S (Polished) - P/N: SC1475P

Product Information Injen Intake Manifold Cover 02-06 Acura RSX Type-S (Polished) - P/N: SC1475P Product Model: [INJ-SC1475P] Injen Intake Manifold Cover 02-06 Acura RSX Type-S (Polished) - P/N: SC1475P Product Model: INJ-SC1475P Injen Technology develops accessories to compliment the engine bay of some of today's most popular vehicles. Injen technology utilizes only the finest materials to produce durable and show quality parts for the enthusiast looking to enhance the appearance of the engine bay. All

Mustang - ***Temp N/A***86-93 Ford Racing Polished 5.0L Cobra Intake Manifold

» Item# M9424Z51P Mustang - ***Temp N/A***86-93 Ford Racing Polished 5.0L Cobra Intake Manifold # M9424Z51P Ships 12/1/09 Description One of the most common upgrades to the latemodel Mustang is a Cobra intake. Great looks and better flow make this Ford Racing Cobra intake an easy decision for a performance boost. Kit includes . Replica of the production 1993 Cobra intake manifold Polished to a show qualtiy finish! Airflow is good up to 350+ horsepower Kit includes upper intake manifold and lower intake

Caballero Action +Plus Intake Manifold Non-EGR Power Band To 5500 RPM Square Bore Low Rise/Dual Plane Polished

> Item Number: 8120P Caballero Action +Plus Intake Manifold Non-EGR Power Band To 5500 RPM Square Bore Low Rise/Dual Plane Polished Manufacturer Item #8120P Fully CNC Machined For A Perfect Fit Permanent Mold Casting Process Low Rise/Dual Plane Design For Maximum Torque Dyno Proven To Make 25hp Over Competition Lighter /Smoother /Better Looking/Consistent Casting Caballero Action +Plus Intake Manifold Non-EGR Power Band To 5500 RPM Square Bore Low Rise/Dual Plane Polished Intake Manifold Product fits: 1994

VAC - Port & Polished Schrick M52 / S52 Intake Manifold

VAC - Port & Polished Schrick M52 / S52 Intake Manifold Our VAC optimized Schrick M52 / S52 Aluminum Intake Manifold has all the features of the original Schrick manifold plus the benefits of our unparalleled Port and Polish work! Pictured: port work from VAC Motorsports inside our Schrick Manifold... Without the port and polish work, the Schrick manifold performs much better than the OEM OBD2 manifold but not quite as good on the top RPM band as the OEM OBD1 manifold. With our Port and Polish work, the

Power+Plus Chevy SB TYPHOON Aluminum Intake Manifold, Polished

Power+Plus Chevy SB TYPHOON Aluminum Intake Manifold, Polished PPP-52020 This manifold is a stock replacement/street legal part for 302, 327, and 350 V8s with OEM carb; 1966-72 (1973 non-CA) passenger cars, 1966-83 trucks and Suburbans, except stock equipped EGR. Also stock replacement/street legal for 302, 327 and 350 V8s with 1987-95 heads with OEM 4-bbl carb, except stock equipped EGR. Related Products...

Professional Products Typhoon 85mm Intake Manifold - Polished - LS1 / LS6

> Professional Products Typhoon 85mm Intake Manifold - Polished - LS1 / LS6 Professional Products Typhoon 85mm Intake Manifold - Polished - LS1 / LS6 Item Code# 52060 Regular Price $659.95 Sale Price $589.95 - You Save 11% Qty. 85mm Typhoon Intake Manifold - Polished This manifold is the result of over one year of development and testing and has proven to provide significant increases in power. In direct comparison dyno tests against a factory LS6 intake manifold, the Typhoon produced 17.7 more horsepower*

Intake Manifold Polished 52025 Small Block GM Crosswind

Intake Manifold Polished 52025 Small Block GM Crosswind Product 15/57 Intake Manifold Polished 52025 Small Block GM Crosswind New and in the original box. THIS IS A POLISHED INTAKE. Small Block Chevy. CROSSWIND for 23° Heads. 1957-?95 Small Block Chevy V8. The new CrossWind Manifold is a special version of the 52020/52021. While it is the exact same height, it features an open area under the plenum chamber. This provides for a flow of cooling air which keeps the temperature of the air/fuel charge lower thus

Professional 53000 Cyclone polished Chevrolet big block intake manifold

Professional 53000 Cyclone polished big block Chevrolet intake manifold is designed for street 396-502 cubic inch Chevy big block engines with oval port general duty cylinder heads with 1965-1990 head design. You can use Edelbrock, Carter, Holley or Quadrajet carbs and all distributors. Recommend 600 cfm carb for low rpm use or 750 cfm carb for sport use or towing over 10,000 lbs. Square bore carburetors such as Holley, Edelbrock, Carter or spread bore carbs like Quadrajet can be used. Great low end torque

Injen Intake Manifold Polished Cover RSX, Civic Si '02+

Hot new Polished Intake Manifold Cover from Injen for your RSX (Type-S and Base) and '03+ Civic Si.

Edelbrock Performer RPM Air-Gap Intake Manifold- Polished, Square Bore, Chevy, Small Block

Edelbrock Performer RPM Air-Gap Intake Manifold- Polished, Square Bore, Chevy, Small Block EDL-75011 $428.69 Deliver a cooler, denser air/fuel mixture to your cylinders. Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a

Ford Racing Polished Cobra EFI Intake Manifold

Ford Racing Polished Cobra EFI Intake Manifold Ford Racing Polished Cobra EFI Intake Manifold FMS-M-9424-Z51P M-9424-Z51P When Ford was looking for an intake to put on their 1993 Cobra, they came up with this. Tons of R&D time was put in to develop a great intake for the street and strip. This intake is polished to a mirror shine and will look great under the hood of any Mustang! Application: 1986-1993 Mustangs 1994-1995 Mustangs require use of an elbow Small Block Ford with EFI Related Products